A heavy duty solution for safely containing liquids. Made of 12 gauge steel, these pallets won’t crack if they’re hit and won't melt if there's a fire. All meet EPA regulations for storing hazardous liquids. However, they might corrode if exposed to chemicals. Remove the grating for easy cleaning.

When choosing a pallet, consider the surface area and capacity you need. For number of 55-gallon drums gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. For your system to meet EPA 40 CFR 264.175, the pallet must hold either 10% of the total capacity of your shipment or the full capacity of the largest container—whichever is greater.

Style B pallets don’t nest, so you can access the forklift entry points even when they’re stacked.

Add a ramp to wheel drums onto your pallet with a hand truck.

The 52" × 52" grating is sized to hold an IBC tank. The grating is removable for easy cleaning.

Add a bucket (sold separately) to catch spills and drips when dispensing from the tank. Bucket has a spill capacity of 3 gallons; spills larger than 3 gallons are channeled into the well in the bottom of the pallet.

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage.

Style A have flexible sidewalls that spring back into shape. Drive over them to drop drums directly onto the mat.

Style A have recessed rings to secure drums and “HAZARDOUS” stenciled on the side.

Style B has removable grating for easy cleaning.

No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank. These tanks have two walls, so if the primary compartment ruptures, the secondary one will contain the leak. It can hold 110% of the primary tank's volume and will also protect it from damage in case of impact.

Made of polyethylene, these tanks can store a broader range of chemicals than steel double-wall tanks. The plastic contains UV inhibitors so they can be used outside.

These tanks have a flat space on top where you can mount a metering pump. Because these tanks meet NSF/ANSI 61 for drinking water, you can meter chemicals stored in them into your drinking water system.

Provide extra protection for products that require double-wall containment, such as diesel and waste oil, solvents, and antifreeze. The tank's second wall forms a spill-control compartment that holds 110% of the primary compartment's storage capacity. They have an opening for venting in the primary compartment, an opening for leak detection in the secondary compartment, and two openings for emergency venting in the primary and secondary compartments.

Contain spills when moving and storing drums. Dollies have plastic wheels for use on smooth surfaces.

Dollies with solid, textured platforms have a drain spout to dump spills into a container. Add the optional handle to pull the dolly.

Dollies with solid, smooth platforms includes a drum container that rests on the dolly. It is nestable for easy storage. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with perforated platforms have removable top grating deck for easy cleaning and a drain plug in the base. Wheel brakes prevent dollies from rolling. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with four swivel casters have better maneuverability. Dollies with two swivel casters and two axle mounted wheels have better steering control.

Base unit for pails and cans has a reservoir to contain spills.

Base unit for drums has a reservoir to contain spills plus a deep well that holds two 5-gallon pails for dispensing.

Add-on units allow you to create up to two additional storage levels on a base unit.