DIN Retaining Rings | McMaster-Carr

Filter by

Specifications Met

System of Measurement

Retaining Ring Type

Groove Diameter

Retaining Ring Style

Material

Ring OD

Ring ID

Finish

Color

Minimum Hardness

Thrust Load Capacity

10,000 lbf to 19,999 lbf

20,000 lbf to 99,999 lbf

100,000 lbf to 199,999 lbf

Magnetic Properties

Magnetic

May Be Mildly Magnetic

Hardness

RoHS

DFARS Specialty Metals

Compliant

Exempt

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Passivation

Passivated

Unpassivated

Side-Mount External Retaining Rings Included

For 3 mm OD (20 Pieces)

For 3 mm OD (40 Pieces)

For 4 mm OD (20 Pieces)

For 4 mm OD (40 Pieces)

For 5 mm OD (20 Pieces)

For 5 mm OD (40 Pieces)

For 6 mm OD (20 Pieces)

For 6 mm OD (40 Pieces)

For 7 mm OD (20 Pieces)

For 7 mm OD (30 Pieces)

For 8 mm OD (20 Pieces)

For 8 mm OD (30 Pieces)

For 9 mm OD (20 Pieces)

For 10 mm OD (10 Pieces)

For 10 mm OD (20 Pieces)

For 11 mm OD (20 Pieces)

For 12 mm OD (10 Pieces)

For 13 mm OD (10 Pieces)

Performance

782 Products

Retaining Ring Type

External

Secure components on a shaft

412 products

Internal

Secure components inside a housing or bore

371 products

Retaining Ring Style

Tapered

Maintain 360-degree contact with the groove for a sure hold

491 products

Side Mount

When you can't access the ends of a shaft, install rings from the side

57 products

External Retaining Rings

Secure components on a shaft with our go-to external retaining rings. Shaped in the most common style, these are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Open with retaining ring pliers, pass over the end of a shaft, then release them to spring into a groove.

Ring ID is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

Zinc-Plated Carbon Steel—These rings are strong with good wear resistance. They provide some corrosion resistance, but not as much as stainless steel rings.

1.4122 Stainless Steel—Corrosion and wear resistant rings that won't break down from rubbing against other metal.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For OD, mm	Dia.	Wd.	ID	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		3	2.8	0.5	2.7	0.4	100	Rockwell C44	DIN 471	100	98541A111	00000	5449A79	000000


		4	3.8	0.5	3.7	0.4	110	Rockwell C44	DIN 471	100	98541A112	0000	5449A79	00000
		5	4.8	0.7	4.7	0.6	220	Rockwell C44	DIN 471	100	98541A113	0000	5449A79	00000
		6	5.7	0.8	5.6	0.7	320	Rockwell C44	DIN 471	100	98541A114	0000	5449A79	00000
		7	6.7	0.9	6.5	0.8	580	Rockwell C44	DIN 471	100	98541A115	00000	5449A79	00000
		8	7.6	0.9	7.4	0.8	670	Rockwell C44	DIN 471	100	98541A116	00000	5449A79	00000
		9	8.6	1.1	8.4	1	780	Rockwell C44	DIN 471	100	98541A117	00000	5449A79	00000
		10	9.6	1.1	9.3	1	890	Rockwell C44	DIN 471	100	98541A118	0000	5449A79	00000
		11	10.5	1.1	10.2	1	1,010	Rockwell C44	DIN 471	100	98541A445	00000	5449A81	00000
		12	11.5	1.1	11	1	1,120	Rockwell C44	DIN 471	100	98541A119	00000	5449A81	00000
		13	12.4	1.1	11.9	1	1,300	Rockwell C44	DIN 471	100	98541A405	00000	5449A81	00000


		14	13.4	1.1	12.9	1	1,430	Rockwell C44	DIN 471	100	98541A120	00000	5449A81	00000
		15	14.3	1.1	13.8	1	1,550	Rockwell C44	DIN 471	100	98541A410	00000	5449A81	00000
		16	15.2	1.1	14.7	1	1,660	Rockwell C44	DIN 471	100	98541A121	00000	5449A81	00000
		17	16.2	1.1	15.7	1	1,790	Rockwell C44	DIN 471	50	98541A420	0000	5449A81	00000
		18	17	1.3	16.5	1.2	3,820	Rockwell C44	DIN 471	50	98541A122	00000	5449A81	00000
		19	18	1.3	17.5	1.2	3,820	Rockwell C44	DIN 471	50	98541A430	00000	5449A81	00000
		20	19	1.3	18.5	1.2	3,840	Rockwell C44	DIN 471	50	98541A123	00000	5449A81	00000
		21	20	1.3	19.5	1.2	3,770	Rockwell C44	DIN 471	25	98541A461	0000	5449A81	00000
		22	21	1.3	20.5	1.2	3,790	Rockwell C44	DIN 471	25	98541A463	0000	5449A81	00000
		23	22	1.3	21.5	1.2	3,730	Rockwell C44	DIN 471	25	98541A465	00000	5449A81	00000


		24	22.9	1.3	22.2	1.2	3,610	Rockwell C44	DIN 471	25	98541A125	0000	5449A81	00000
		25	23.9	1.3	23.2	1.2	3,640	Rockwell C44	DIN 471	25	98541A440	0000	5449A81	00000
		26	24.9	1.3	24.2	1.2	3,610	Rockwell C44	DIN 471	25	98541A128	00000	5449A82	00000
		27	25.6	1.3	24.9	1.2	3,680	Rockwell C44	DIN 471	10	98541A129	0000	5449A82	00000
		28	26.6	1.6	25.9	1.5	7,210	Rockwell C44	DIN 471	10	98541A130	0000	5449A82	00000
		29	27.6	1.6	26.9	1.5	7,140	Rockwell C44	DIN 471	10	98541A132	00000	5449A82	00000
		30	28.6	1.6	27.9	1.5	7,210	Rockwell C44	DIN 471	10	98541A134	00000	5449A82	00000
		31	29.3	1.6	28.6	1.5	7,080	Rockwell C47	DIN 471	10	98541A106	0000	5449A82	00000
		32	30.3	1.6	29.6	1.5	7,010	Rockwell C44	DIN 471	10	98541A139	00000	5449A82	00000
		33	31.3	1.6	30.5	1.5	7,100	Rockwell C47	DIN 471	10	98541A110	0000	5449A82	00000


		34	32.3	1.6	31.5	1.5	7,030	Rockwell C44	DIN 471	10	98541A143	00000	5449A82	00000
		35	33	1.6	32.2	1.5	6,920	Rockwell C44	DIN 471	10	98541A146	00000	5449A82	00000
		36	34	1.85	33.2	1.75	11,100	Rockwell C44	DIN 471	10	98541A149	00000	5449A82	00000
		37	35	1.85	34.2	1.75	11,200	Rockwell C47	DIN 471	10	98541A157	00000	5449A82	00000
		38	36	1.85	35.2	1.75	11,100	Rockwell C44	DIN 471	10	98541A152	00000	5449A82	00000
		39	37	1.85	36	1.75	11,100	Rockwell C47	DIN 471	5	98541A160	00000	5449A82	00000
		40	37.5	1.85	36.5	1.75	11,400	Rockwell C44	DIN 471	5	98541A156	00000	5449A82	00000
		42	39.5	1.85	38.5	1.75	11,200	Rockwell C47	DIN 471	1	98541A179	0000	5449A82	00000
		44	41.5	1.85	40.5	1.75	10,900	Rockwell C47	DIN 471	1	98541A337	0000	5449A82	00000
		45	42.5	1.85	41.5	1.75	11,000	Rockwell C44	DIN 471	5	98541A161	00000	5449A82	00000


		46	43.5	1.85	42.5	1.75	10,900	Rockwell C47	DIN 471	1	98541A339	0000	5449A82	00000
		47	44.5	1.85	43.5	1.75	11,100	Rockwell C47	DIN 471	5	98541A237	0000	5449A82	00000
		48	45.5	1.85	44.5	1.75	11,100	Rockwell C47	DIN 471	1	98541A364	0000	5449A82	00000
		50	47	2.15	45.8	2	16,400	Rockwell C44	DIN 471	5	98541A167	00000	5449A82	00000
		52	49	2.15	47.8	2	16,400	Rockwell C44	DIN 471	1	98541A385	0000	5449A82	00000
		54	51	2.15	49.8	2	16,000	Rockwell C44	DIN 471	1	98541A401	0000	5449A82	00000
		55	52	2.15	50.8	2	16,000	Rockwell C44	DIN 471	1	98541A171	0000	5449A82	00000
		56	53	2.15	51.8	2	15,900	Rockwell C44	DIN 471	1	98541A464	0000	5449A82	00000
		57	54	2.15	52.8	2	15,900	Rockwell C44	DIN 471	5	98541A243	00000	5449A82	00000
		58	55	2.15	53.8	2	15,900	Rockwell C44	DIN 471	1	98541A476	0000	5449A82	00000

60	57	2.15	55.8	2	15,500	Rockwell C44	DIN 471	1	98541A174	0000	5449A82	00000
62	59	2.15	57.8	2	15,500	Rockwell C44	DIN 471	1	98541A490	0000	5449A83	00000
65	62	2.65	60.8	2.5	30,300	Rockwell C44	DIN 471	1	98541A178	0000	5449A83	00000
68	65	2.65	63.5	2.5	30,300	Rockwell C44	DIN 471	1	98541A536	0000	5449A83	00000
70	67	2.65	65.5	2.5	30,100	Rockwell C44	DIN 471	1	98541A182	0000	5449A83	00000
72	69	2.65	67.5	2.5	29,400	Rockwell C44	DIN 471	1	98541A569	0000	5449A83	00000
75	72	2.65	70.5	2.5	29,200	Rockwell C44	DIN 471	1	98541A185	0000	5449A83	00000
78	75	2.65	73.5	2.5	29,400	Rockwell C44	DIN 471	1	98541A602	0000	5449A83	00000
80	76.5	2.65	74.5	2.5	28,700	Rockwell C44	DIN 471	1	98541A189	0000	5449A83	00000
82	78.5	2.65	76.5	2.5	28,700	Rockwell C44	DIN 471	1	98541A620	0000	5449A83	00000
85	81.5	3.15	79.5	3	48,300	Rockwell C44	DIN 471	1	98541A193	0000	5449A83	00000
88	84.5	3.15	82.5	3	49,600	Rockwell C44	DIN 471	1	98541A637	0000	5449A83	00000
90	86.5	3.15	84.5	3	48,700	Rockwell C44	DIN 471	1	98541A210	0000	5449A83	00000
92	88.5	3.15	86.5	3	48,700	Rockwell C44	DIN 471	1	98541A673	0000	5449A83	00000
95	91.5	3.15	89.5	3	47,600	Rockwell C44	DIN 471	1	98541A215	00000	5449A83	00000
98	94.5	3.15	91.5	3	46,700	Rockwell C44	DIN 471	1	98541A698	0000	5449A83	00000
100	96.5	3.15	94.5	3	108,000	Rockwell C44	DIN 471	1	98541A224	00000	5449A83	00000
105	101	4.15	98	4	105,000	Rockwell C44	DIN 471	1	98541A279	0000	5449A84	00000
110	106	4.15	103	4	102,000	Rockwell C44	DIN 471	1	98541A236	0000	5449A84	00000
115	111	4.15	108	4	98,400	Rockwell C44	DIN 471	1	98541A297	00000	5449A84	00000
120	116	4.15	113	4	95,300	Rockwell C44	DIN 471	1	98541A247	00000	5449A84	00000
125	121	4.15	118	4	92,300	Rockwell C44	DIN 471	1	98541A326	0000	5449A84	00000
130	126	4.15	123	4	88,800	Rockwell C44	DIN 471	1	98541A258	00000	5449A84	00000
135	131	4.15	128	4	87,400	Rockwell C44	DIN 471	1	98541A370	00000	5449A84	00000
140	136	4.15	133	4	84,500	Rockwell C44	DIN 471	1	98541A269	00000	5449A84	00000
145	141	4.15	138	4	82,500	Rockwell C44	DIN 471	1	98541A380	0000	5300A331	00000
150	145	4.15	142	4	80,200	Rockwell C44	DIN 471	1	98541A278	00000	5300A331	00000
160	155	4.15	151	4	78,400	Rockwell C44	DIN 471	1	98541A288	00000	5300A331	00000
165	160	4.15	155.5	4	77,500	Rockwell C44	DIN 471	1	98541A411	00000	5300A331	00000
170	165	4.15	160.5	4	78,400	Rockwell C44	DIN 471	1	98541A296	00000	5300A351	000000
175	170	4.15	165.5	4	76,400	Rockwell C44	DIN 471	1	98541A415	00000	5300A351	000000
180	175	4.15	170.5	4	77,500	Rockwell C44	DIN 471	1	98541A307	00000	5300A351	000000
185	180	4.15	175.5	4	75,500	Rockwell C44	DIN 471	1	98541A478	00000	5300A351	000000
190	185	4.15	180.5	4	74,800	Rockwell C44	DIN 471	1	98541A312	00000	5300A351	000000
200	195	4.15	190.5	4	71,700	Rockwell C44	DIN 471	1	98541A323	00000	5300A351	000000
210	204	5.15	198	5	134,000	Rockwell C40	DIN 471	1	98541A481	00000	5300A351	000000
220	214	5.15	208	5	128,000	Rockwell C40	DIN 471	1	98541A718	00000	5300A351	000000
230	224	5.15	218	5	123,000	Rockwell C40	DIN 471	1	98541A521	00000	5300A351	000000
240	234	5.15	228	5	119,000	Rockwell C40	DIN 471	1	98541A816	00000	5300A351	000000
250	244	5.15	238	5	113,000	Rockwell C40	DIN 471	1	98541A701	00000	5300A351	000000
260	252	5.15	245	5	121,000	Rockwell C40	DIN 471	1	98541A864	00000	5300A351	000000
280	272	5.15	265	5	114,000	Rockwell C40	DIN 471	1	98541A872	00000	5300A351	000000
300	292	5.15	285	5	106,000	Rockwell C40	DIN 471	1	98541A876	00000	5300A351	000000

Zinc-Plated Carbon Steel



		5	4.8	0.7	4.7	0.6	220	Rockwell C47	DIN 471	100	90154A101	0000	5449A79	00000


		6	5.7	0.8	5.6	0.7	320	Rockwell C47	DIN 471	100	90154A111	0000	5449A79	00000
		7	6.7	0.9	6.5	0.8	580	Rockwell C47	DIN 471	100	90154A112	00000	5449A79	00000
		8	7.6	0.9	7.4	0.8	670	Rockwell C47	DIN 471	100	90154A137	00000	5449A79	00000
		9	8.6	1.1	8.4	1	780	Rockwell C47	DIN 471	100	90154A194	00000	5449A79	00000
		10	9.6	1.1	9.3	1	890	Rockwell C47	DIN 471	100	90154A238	00000	5449A79	00000
		11	10.5	1.1	10.2	1	1,010	Rockwell C47	DIN 471	100	90154A247	00000	5449A81	00000
		12	11.5	1.1	11	1	1,120	Rockwell C47	DIN 471	100	90154A273	00000	5449A81	00000
		13	12.4	1.1	11.9	1	1,300	Rockwell C47	DIN 471	100	90154A277	00000	5449A81	00000
		14	13.4	1.1	12.9	1	1,430	Rockwell C47	DIN 471	100	90154A344	00000	5449A81	00000
		15	14.3	1.1	13.8	1	1,550	Rockwell C47	DIN 471	100	90154A385	00000	5449A81	00000


		16	15.2	1.1	14.7	1	1,660	Rockwell C47	DIN 471	100	90154A390	00000	5449A81	00000
		17	16.2	1.1	15.7	1	1,790	Rockwell C47	DIN 471	50	90154A397	00000	5449A81	00000
		18	17	1.3	16.5	1.2	3,820	Rockwell C47	DIN 471	50	90154A421	00000	5449A81	00000
		19	18	1.3	17.5	1.2	3,820	Rockwell C47	DIN 471	50	90154A444	00000	5449A81	00000
		20	19	1.3	18.5	1.2	3,840	Rockwell C47	DIN 471	50	90154A478	00000	5449A81	00000
		21	20	1.3	19.5	1.2	3,770	Rockwell C47	DIN 471	25	90154A499	0000	5449A81	00000
		22	21	1.3	20.5	1.2	3,790	Rockwell C47	DIN 471	25	90154A511	0000	5449A81	00000
		23	22	1.3	21.5	1.2	3,730	Rockwell C47	DIN 471	25	90154A533	00000	5449A81	00000
		24	22.9	1.3	22.2	1.2	3,610	Rockwell C47	DIN 471	25	90154A562	00000	5449A81	00000
		25	23.9	1.3	23.2	1.2	3,640	Rockwell C47	DIN 471	25	90154A569	00000	5449A81	00000


		26	24.9	1.3	24.2	1.2	3,610	Rockwell C47	DIN 471	25	90154A576	00000	5449A82	00000
		27	25.6	1.3	24.9	1.2	3,680	Rockwell C47	DIN 471	10	90154A620	0000	5449A82	00000
		28	26.6	1.6	25.9	1.5	7,210	Rockwell C47	DIN 471	10	90154A633	0000	5449A82	00000
		29	27.6	1.6	26.9	1.5	7,140	Rockwell C47	DIN 471	10	90154A650	00000	5449A82	00000
		30	28.6	1.6	27.9	1.5	7,210	Rockwell C47	DIN 471	10	90154A671	00000	5449A82	00000
		32	30.3	1.6	29.6	1.5	7,010	Rockwell C47	DIN 471	10	90154A684	00000	5449A82	00000
		34	32.3	1.6	31.5	1.5	7,030	Rockwell C47	DIN 471	10	90154A698	00000	5449A82	00000
		35	33	1.6	32.2	1.5	6,920	Rockwell C47	DIN 471	10	90154A724	00000	5449A82	00000
		36	34	1.85	33.2	1.75	11,100	Rockwell C47	DIN 471	10	90154A726	00000	5449A82	00000
		38	36	1.85	35.2	1.75	11,100	Rockwell C47	DIN 471	10	90154A738	00000	5449A82	00000


		40	37.5	1.85	36.5	1.75	11,400	Rockwell C47	DIN 471	5	90154A740	00000	5449A82	00000
		45	42.5	1.85	41.5	1.75	11,000	Rockwell C47	DIN 471	5	90154A751	00000	5449A82	00000
		50	47	2.15	45.8	2	16,400	Rockwell C44	DIN 471	1	90154A768	0000	5449A82	00000
		55	52	2.15	50.8	2	16,000	Rockwell C44	DIN 471	1	90154A810	0000	5449A82	00000
		60	57	2.15	55.8	2	15,500	Rockwell C44	DIN 471	1	90154A811	0000	5449A82	00000
		65	62	2.65	60.8	2.5	30,300	Rockwell C44	DIN 471	1	90154A845	0000	5449A83	00000
		70	67	2.65	65.5	2.5	30,100	Rockwell C44	DIN 471	1	90154A861	0000	5449A83	00000
		75	72	2.65	70.5	2.5	29,200	Rockwell C44	DIN 471	1	90154A895	0000	5449A83	00000
		80	76.5	2.65	74.5	2.5	28,700	Rockwell C44	DIN 471	1	90154A899	0000	5449A83	00000
		85	81.5	3.15	79.5	3	48,300	Rockwell C44	DIN 471	1	90154A958	00000	5449A83	00000


		90	86.5	3.15	84.5	3	48,700	Rockwell C44	DIN 471	1	90154A961	00000	5449A83	00000


		1.4122 Stainless Steel



				4	3.8	0.5	3.7	0.4	110	Rockwell C47	DIN 471	10	90967A501	00000	5449A79	00000


5				4.8	0.7	4.7	0.6	220	Rockwell C47	DIN 471	5	90967A109	00000	5449A79	00000
6	5.7			0.8	5.6	0.7	320	Rockwell C47	DIN 471	10	90967A110	0000	5449A79	00000
7	6.7			0.9	6.5	0.8	580	Rockwell C47	DIN 471	10	90967A115	0000	5449A79	00000
8	7.6			0.9	7.4	0.8	670	Rockwell C47	DIN 471	10	90967A120	0000	5449A79	00000
9	8.6			1.1	8.4	1	780	Rockwell C47	DIN 471	10	90967A155	00000	5449A79	00000
10	9.6			1.1	9.3	1	890	Rockwell C47	DIN 471	5	90967A160	0000	5449A79	00000
11	10.5			1.1	10.2	1	1,010	Rockwell C47	DIN 471	5	90967A163	0000	5449A81	00000
12	11.5			1.1	11	1	1,120	Rockwell C47	DIN 471	5	90967A165	0000	5449A81	00000
13	12.4			1.1	11.9	1	1,300	Rockwell C47	DIN 471	5	90967A170	0000	5449A81	00000
14	13.4			1.1	12.9	1	1,430	Rockwell C47	DIN 471	5	90967A175	0000	5449A81	00000


15	14.3			1.1	13.8	1	1,550	Rockwell C47	DIN 471	5	90967A180	0000	5449A81	00000
16	15.2			1.1	14.7	1	1,660	Rockwell C47	DIN 471	5	90967A205	0000	5449A81	00000
17	16.2			1.1	15.7	1	1,790	Rockwell C47	DIN 471	5	90967A210	0000	5449A81	00000
18	17			1.3	16.5	1.2	3,820	Rockwell C47	DIN 471	5	90967A220	0000	5449A81	00000
19	18			1.3	17.5	1.2	3,820	Rockwell C47	DIN 471	5	90967A225	0000	5449A81	00000
20	19			1.3	18.5	1.2	3,840	Rockwell C47	DIN 471	5	90967A235	0000	5449A81	00000
21	20			1.3	19.5	1.2	3,770	Rockwell C47	DIN 471	5	90967A237	00000	5449A81	00000
22	21			1.3	20.5	1.2	3,790	Rockwell C47	DIN 471	5	90967A241	00000	5449A81	00000
23	22			1.3	21.5	1.2	3,730	Rockwell C47	DIN 471	5	90967A246	00000	5449A81	00000
24	22.9			1.3	22.2	1.2	3,610	Rockwell C47	DIN 471	5	90967A265	00000	5449A81	00000


25	23.9			1.3	23.2	1.2	3,640	Rockwell C47	DIN 471	5	90967A270	00000	5449A81	00000
26	24.9			1.3	24.2	1.2	3,610	Rockwell C47	DIN 471	1	90967A275	0000	5449A82	00000
27	25.6			1.3	24.9	1.2	3,680	Rockwell C47	DIN 471	1	90967A281	0000	5449A82	00000
28	26.6			1.6	25.9	1.5	7,210	Rockwell C47	DIN 471	1	90967A286	0000	5449A82	00000
29	27.6			1.6	26.9	1.5	7,140	Rockwell C47	DIN 471	1	90967A292	0000	5449A82	00000
30	28.6			1.6	27.9	1.5	7,210	Rockwell C47	DIN 471	1	90967A297	0000	5449A82	00000
32	30.3			1.6	29.6	1.5	7,010	Rockwell C47	DIN 471	1	90967A312	0000	5449A82	00000
34	32.3			1.6	31.5	1.5	7,030	Rockwell C47	DIN 471	1	90967A323	0000	5449A82	00000
35	33			1.6	32.2	1.5	6,920	Rockwell C47	DIN 471	1	90967A325	0000	5449A82	00000
36	34			1.9	33.2	1.75	11,100	Rockwell C47	DIN 471	1	90967A330	0000	5449A82	00000


38	36			1.9	35.2	1.75	11,100	Rockwell C47	DIN 471	1	90967A333	0000	5449A82	00000
40	37.5			1.9	36.5	1.75	11,400	Rockwell C47	DIN 471	1	90967A341	0000	5449A82	00000
45	42.5			1.9	41.5	1.75	11,000	Rockwell C47	DIN 471	1	90967A345	0000	5449A82	00000
50	47			2.15	45.8	2	16,400	Rockwell C47	DIN 471	1	90967A350	0000	5449A82	00000
55	52			2.15	50.8	2	16,000	Rockwell C47	DIN 471	1	90967A360	0000	5449A82	00000
60	57			2.15	55.8	2	15,500	Rockwell C47	DIN 471	1	90967A375	0000	5449A82	00000
65	62			2.65	60.8	2.5	30,300	Rockwell C47	DIN 471	1	90967A390	0000	5449A83	00000
70	67			2.65	65.5	2.5	30,100	Rockwell C47	DIN 471	1	90967A410	00000	5449A83	00000
75	72			2.65	70.5	2.5	29,200	Rockwell C47	DIN 471	1	90967A425	00000	5449A83	00000
80	76.5			2.65	74.5	2.5	28,700	Rockwell C47	DIN 471	1	90967A440	00000	5449A83	00000

Internal Retaining Rings

Secure components inside a housing or bore with our go-to internal retaining rings. Shaped in the most common style, these are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Squeeze with retaining ring pliers and release into a groove.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

Zinc-Plated Carbon Steel—These rings are strong with good wear resistance. They provide some corrosion resistance, but not as much as stainless steel rings.

1.4122 Stainless Steel—Corrosion and wear resistant rings that won't break down from rubbing against other metal.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	50	98455A108	00000	5449A65	000000


		9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	50	98455A109	0000	5449A65	00000
		10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	50	98455A110	0000	5449A65	00000
		11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	50	98455A111	0000	5449A65	00000
		12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	50	98455A112	0000	5449A65	00000
		13	13.6	1.1	14.1	1	940	Rockwell C47	DIN 472	50	98455A113	0000	5449A65	00000
		14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	50	98455A114	0000	5449A91	00000
		15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	50	98455A115	0000	5449A91	00000
		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	50	98455A116	0000	5449A91	00000
		17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	50	98455A117	0000	5449A91	00000
		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	50	98455A119	0000	5449A91	00000


		19	20	1.1	20.5	1	1,520	Rockwell C47	DIN 472	50	98455A224	00000	5449A91	00000
		20	21	1.1	21.5	1	1,610	Rockwell C47	DIN 472	50	98455A120	0000	5449A91	00000
		21	22	1.1	22.5	1	1,700	Rockwell C47	DIN 472	50	98455A121	00000	5449A91	00000
		22	23	1.1	23.5	1	1,790	Rockwell C47	DIN 472	50	98455A122	00000	5449A91	00000
		23	24.1	1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	25	98455A123	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	25	98455A124	0000	5449A91	00000
		25	26.2	1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	25	98455A125	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	25	98455A226	0000	5449A92	00000
		27	28.4	1.3	29.1	1.2	2,990	Rockwell C47	DIN 472	25	98455A135	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	25	98455A126	00000	5449A92	00000


		29	30.4	1.3	31.1	1.2	3,050	Rockwell C47	DIN 472	25	98455A158	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	10	98455A127	0000	5449A92	00000
		31	32.7	1.3	33.4	1.2	3,100	Rockwell C47	DIN 472	25	98455A719	0000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	10	98455A129	0000	5449A92	00000
		33	34.7	1.3	35.5	1.2	3,210	Rockwell C47	DIN 472	10	98455A721	0000	5449A92	00000
		34	35.7	1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	10	98455A131	0000	5449A92	00000
		35	37	1.6	37.8	1.5	6,040	Rockwell C47	DIN 472	10	98455A722	0000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	10	98455A134	0000	5449A92	00000
		37	39	1.6	39.8	1.5	6,090	Rockwell C47	DIN 472	10	98455A723	00000	5449A92	00000
		38	40	1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	10	98455A137	0000	5449A92	00000


		39	41	1.6	42	1.5	6,470	Rockwell C47	DIN 472	10	98455A724	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	5	98455A139	0000	5449A92	00000
		41	43.5	1.85	44.5	1.75	10,110	Rockwell C47	DIN 472	10	98455A725	0000	5449A92	00000
		42	44.5	1.85	45.5	1.75	10,000	Rockwell C47	DIN 472	5	98455A169	0000	5449A92	00000
		43	45.5	1.85	46.5	1.75	10,000	Rockwell C47	DIN 472	10	98455A726	0000	5449A92	00000
		44	46.5	1.85	47.5	1.75	9,730	Rockwell C47	DIN 472	5	98455A236	0000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	5	98455A141	0000	5449A92	00000
		46	48.5	1.85	49.5	1.75	9,640	Rockwell C47	DIN 472	5	98455A297	0000	5449A92	00000
		47	49.5	1.85	50.5	1.75	9,770	Rockwell C47	DIN 472	10	98455A727	0000	5449A92	00000
		48	50.5	1.85	51.5	1.75	9,710	Rockwell C47	DIN 472	5	98455A312	0000	5449A92	00000


		50	53	2.15	54.2	2	13,600	Rockwell C44	DIN 472	5	98455A142	0000	5449A92	00000
		52	55	2.15	56.2	2	13,500	Rockwell C44	DIN 472	1	98455A362	0000	5449A92	00000
		53	56	2.15	57.2	2	13,640	Rockwell C44	DIN 472	5	98455A728	0000	5449A92	00000
		54	57	2.15	58.2	2	13,500	Rockwell C44	DIN 472	1	98455A364	0000	5449A92	00000
		55	58	2.15	59.2	2	13,500	Rockwell C44	DIN 472	5	98455A144	0000	5449A92	00000
		56	59	2.15	60.2	2	13,500	Rockwell C44	DIN 472	1	98455A367	0000	5449A92	00000
		57	60	2.15	61.2	2	13,660	Rockwell C44	DIN 472	5	98455A729	0000	5449A92	00000
		58	61	2.15	62.2	2	13,600	Rockwell C44	DIN 472	1	98455A384	0000	5449A92	00000
		60	63	2.15	64.2	2	13,700	Rockwell C44	DIN 472	1	98455A146	0000	5449A92	00000
		62	65	2.15	66.2	2	13,600	Rockwell C44	DIN 472	1	98455A395	0000	5449A93	00000

63	66	2.15	67.2	2	13,660	Rockwell C44	DIN 472	5	98455A731	00000	5449A93	00000
64	67	2.15	68.2	2	13,600	Rockwell C44	DIN 472	1	98455A404	0000	5449A93	00000
65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 472	1	98455A147	0000	5449A93	00000
67	70	2.65	71.5	2.5	27,200	Rockwell C44	DIN 472	5	98455A732	00000	5449A93	00000
68	71	2.65	72.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A423	0000	5449A93	00000
70	73	2.65	74.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A149	0000	5449A93	00000
72	75	2.65	76.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A428	0000	5449A93	00000
75	78	2.65	79.5	2.5	26,500	Rockwell C44	DIN 472	1	98455A150	0000	5449A93	00000
76	79	2.65	80.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A454	0000	5449A93	00000
78	81	2.65	82.5	2.5	27,400	Rockwell C44	DIN 472	1	98455A459	0000	5449A93	00000
80	83.5	2.65	85.5	2.5	26,900	Rockwell C44	DIN 472	1	98455A151	0000	5449A93	00000
82	85.5	2.65	87.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A528	0000	5449A93	00000
85	88.5	3.15	90.5	3	45,100	Rockwell C44	DIN 472	1	98455A153	0000	5449A93	00000
88	91.5	3.15	93.5	3	46,900	Rockwell C44	DIN 472	1	98455A578	0000	5449A93	00000
90	93.5	3.15	95.5	3	44,700	Rockwell C44	DIN 472	1	98455A156	0000	5449A93	00000
92	95.5	3.15	97.5	3	45,100	Rockwell C44	DIN 472	1	98455A637	0000	5449A93	00000
95	98.5	3.15	100.5	3	43,800	Rockwell C44	DIN 472	1	98455A159	0000	5449A93	00000
98	101.5	3.15	103.5	3	42,900	Rockwell C44	DIN 472	1	98455A649	0000	5449A93	00000
100	103.5	3.15	105.5	3	42,200	Rockwell C44	DIN 472	1	98455A161	0000	5449A93	00000
105	109	4.15	112	4	98,010	Rockwell C44	DIN 472	1	98455A733	0000	5449A94	00000
110	114	4.15	117	4	93,200	Rockwell C44	DIN 472	1	98455A674	0000	5449A94	00000
115	119	4.15	122	4	91,940	Rockwell C44	DIN 472	1	98455A734	0000	5449A94	00000
120	124	4.15	127	4	89,000	Rockwell C44	DIN 472	1	98455A167	0000	5449A94	00000
125	129	4.15	132	4	86,550	Rockwell C44	DIN 472	1	98455A735	0000	5449A94	00000
130	134	4.15	137	4	84,000	Rockwell C44	DIN 472	1	98455A170	0000	5449A94	00000
135	139	4.15	142	4	80,480	Rockwell C44	DIN 472	1	98455A736	0000	5449A94	00000
140	144	4.15	147	4	78,600	Rockwell C44	DIN 472	1	98455A173	0000	5449A94	00000
145	149	4.15	152	4	75,530	Rockwell C44	DIN 472	1	98455A737	0000	5300A211	00000
150	155	4.15	158	4	73,200	Rockwell C44	DIN 472	1	98455A743	00000	5300A211	00000
155	160	4.15	164	4	72,830	Rockwell C44	DIN 472	1	98455A738	00000	5300A271	000000
160	165	4.15	169	4	72,100	Rockwell C44	DIN 472	1	98455A179	0000	5300A271	000000
165	170	4.15	174.5	4	71,710	Rockwell C44	DIN 472	1	98455A739	00000	5300A271	000000
170	175	4.15	179.5	4	78,400	Rockwell C44	DIN 472	1	98455A757	00000	5300A271	000000
175	180	4.15	184.5	4	78,900	Rockwell C44	DIN 472	1	98455A741	00000	5300A271	000000
180	185	4.15	189.5	4	78,000	Rockwell C44	DIN 472	1	98455A185	00000	5300A271	000000
185	190	4.15	194.5	4	78,450	Rockwell C44	DIN 472	1	98455A742	00000	5300A271	000000
190	195	4.15	199.5	4	76,400	Rockwell C44	DIN 472	1	98455A768	00000	5300A271	000000
200	205	4.15	209.5	4	73,000	Rockwell C44	DIN 472	1	98455A191	00000	5300A271	000000
210	216	5.15	222	5	135,000	Rockwell C40	DIN 472	1	98455A799	00000	5300A271	000000
220	226	5.15	232	5	129,000	Rockwell C40	DIN 472	1	98455A805	00000	5300A271	000000
230	236	5.15	242	5	123,000	Rockwell C40	DIN 472	1	98455A812	00000	5300A271	000000
240	246	5.15	252	5	118,000	Rockwell C40	DIN 472	1	98455A818	00000	5300A271	000000
250	256	5.15	262	5	113,000	Rockwell C40	DIN 472	1	98455A844	00000	5300A271	000000
260	268	5.15	275	5	120,000	Rockwell C40	DIN 472	1	98455A879	00000	5300A271	000000
270	278	5.15	285	5	116,000	Rockwell C40	DIN 472	1	98455A898	00000	5300A271	000000
280	288	5.15	295	5	112,000	Rockwell C40	DIN 472	1	98455A939	00000	5300A271	000000
290	298	5.15	305	5	108,000	Rockwell C40	DIN 472	1	98455A943	00000	5300A271	000000
300	308	5.15	315	5	104,000	Rockwell C40	DIN 472	1	98455A945	00000	5300A271	000000

Zinc-Plated Carbon Steel



		8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	50	90301A110	0000	5449A65	00000


		9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	50	90301A114	0000	5449A65	00000
		10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	50	90301A161	0000	5449A65	00000
		11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	50	90301A182	0000	5449A65	00000
		12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	50	90301A183	0000	5449A65	00000
		14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	50	90301A229	0000	5449A91	00000
		15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	50	90301A231	00000	5449A91	00000
		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	50	90301A256	00000	5449A91	00000
		17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	50	90301A284	00000	5449A91	00000
		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	50	90301A297	00000	5449A91	00000
		19	20	1.1	20.5	1	1,520	Rockwell C47	DIN 472	50	90301A326	00000	5449A91	00000


		20	21	1.1	21.5	1	1,610	Rockwell C47	DIN 472	50	90301A335	00000	5449A91	00000
		21	22	1.1	22.5	1	1,700	Rockwell C47	DIN 472	50	90301A337	00000	5449A91	00000
		22	23	1.1	23.5	1	1,790	Rockwell C47	DIN 472	50	90301A362	00000	5449A91	00000
		23	24.1	1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	25	90301A389	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	25	90301A438	0000	5449A91	00000
		25	26.2	1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	25	90301A453	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	25	90301A462	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	25	90301A472	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	10	90301A490	0000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	10	90301A493	0000	5449A92	00000


		34	35.7	1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	10	90301A501	0000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	10	90301A516	0000	5449A92	00000
		38	40	1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	10	90301A518	00000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	5	90301A546	0000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	5	90301A611	0000	5449A92	00000
		50	53	2.15	54.2	2	13,600	Rockwell C44	DIN 472	5	90301A641	00000	5449A92	00000
		55	58	2.15	59.2	2	13,500	Rockwell C44	DIN 472	5	90301A650	00000	5449A92	00000
		60	63	2.15	64.2	2	13,700	Rockwell C44	DIN 472	1	90301A686	0000	5449A92	00000
		65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 472	1	90301A765	0000	5449A93	00000
		70	73	2.65	74.5	2.5	26,700	Rockwell C44	DIN 472	1	90301A816	0000	5449A93	00000


		75	78	2.65	79.5	2.5	26,500	Rockwell C44	DIN 472	1	90301A827	0000	5449A93	00000
		80	83.5	2.65	85.5	2.5	26,900	Rockwell C44	DIN 472	1	90301A831	0000	5449A93	00000
		85	88.5	3.15	90.5	3	45,100	Rockwell C44	DIN 472	1	90301A938	0000	5449A93	00000
		90	93.5	3.15	95.5	3	44,700	Rockwell C44	DIN 472	1	90301A971	0000	5449A93	00000


		1.4122 Stainless Steel



				8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	10	98394A611	00000	5449A65	00000


				9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	10	98394A653	00000	5449A65	00000
				10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	5	98394A417	0000	5449A65	00000
				11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	5	98394A421	0000	5449A65	00000
				12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	5	98394A424	0000	5449A65	00000
				13	13.6	1.1	14.1	1	940	Rockwell C47	DIN 472	5	98394A425	0000	5449A65	00000
				14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	5	98394A427	0000	5449A91	00000
				15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	5	98394A429	00000	5449A91	00000
				16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	5	98394A431	0000	5449A91	00000
				17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	5	98394A433	00000	5449A91	00000
18				19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	5	98394A434	0000	5449A91	00000


19	20			1.1	20.5	1	1,520	Rockwell C47	DIN 472	5	98394A435	00000	5449A91	00000
20	21			1.1	21.5	1	1,610	Rockwell C47	DIN 472	5	98394A437	00000	5449A91	00000
21	22			1.1	22.5	1	1,700	Rockwell C47	DIN 472	5	98394A439	00000	5449A91	00000
22	23			1.1	23.5	1	1,790	Rockwell C47	DIN 472	5	98394A440	00000	5449A91	00000
23	24.1			1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	1	98394A441	0000	5449A91	00000
24	25.2			1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	1	98394A443	0000	5449A91	00000
25	26.2			1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	1	98394A444	0000	5449A91	00000
26	27.2			1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	1	98394A445	0000	5449A92	00000
28	29.4			1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	1	98394A447	0000	5449A92	00000
30	31.4			1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	1	98394A450	0000	5449A92	00000


32	33.7			1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	1	98394A453	0000	5449A92	00000
34	35.7			1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	1	98394A467	0000	5449A92	00000
36	38			1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	1	98394A471	0000	5449A92	00000
38	40			1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	1	98394A475	0000	5449A92	00000
40	42.5			1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	1	98394A479	0000	5449A92	00000
45	47.5			1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	1	98394A488	0000	5449A92	00000
50	53			2.15	54.2	2	13,600	Rockwell C47	DIN 472	1	98394A496	0000	5449A92	00000
55	58			2.15	59.2	2	13,500	Rockwell C47	DIN 472	1	98394A504	0000	5449A92	00000
60	63			2.15	64.2	2	13,700	Rockwell C47	DIN 472	1	98394A512	0000	5449A92	00000
65	68			2.65	69.2	2.5	27,200	Rockwell C47	DIN 472	1	98394A520	00000	5449A93	00000


70	73			2.65	74.5	2.5	26,700	Rockwell C47	DIN 472	1	98394A524	00000	5449A93	00000
75	78			2.65	79.5	2.5	26,500	Rockwell C47	DIN 472	1	98394A528	00000	5449A93	00000
80	83.5			2.65	85.5	2.5	26,900	Rockwell C47	DIN 472	1	98394A538	00000	5449A93	00000
85	88.5			3.15	90.5	3	45,100	Rockwell C47	DIN 472	1	98394A552	00000	5449A93	00000
90	93.5			3.15	95.5	3	44,700	Rockwell C47	DIN 472	1	98394A556	00000	5449A93	00000
95	98.5			3.15	100.5	3	43,800	Rockwell C47	DIN 472	1	98394A560	00000	5449A93	00000
100	103.5			3.15	105.5	3	42,200	Rockwell C47	DIN 472	1	98394A686	00000	5449A93	00000

Side-Mount External Retaining Rings

When you can't access the ends of a shaft, install these rings anywhere along its length. Also known as E-Style rings, these grip the shaft with three contact points and a wide shoulder. Push into the groove with a side-mount retaining ring tool.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

Zinc-Plated Carbon Steel—These rings are strong with good wear resistance. They provide some corrosion resistance, but not as much as stainless steel rings.

1.4122 Stainless Steel—Corrosion and wear resistant rings that won't break down from rubbing against other metal.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For OD, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		1 to 1.4	0.8	0.24	1.95	0.2	10	Rockwell C46	DIN 6799	50	98543A050	00000	———	0


		1.4 to 2	1.2	0.34	2.9	0.3	20	Rockwell C46	DIN 6799	100	98543A060	0000	———	0
		2 to 2.5	1.5	0.44	3.9	0.4	40	Rockwell C46	DIN 6799	100	98543A070	00000	———	0
		2.5 to 3	1.9	0.54	4.4	0.5	70	Rockwell C46	DIN 6799	100	98543A080	0000	———	0
		3 to 4	2.3	0.64	5.9	0.6	110	Rockwell C46	DIN 6799	100	98543A101	0000	57905A41	000000
		4 to 5	3.2	0.64	6.9	0.6	140	Rockwell C46	DIN 6799	100	98543A103	0000	57905A42	00000
		5 to 7	4	0.74	8.85	0.7	210	Rockwell C46	DIN 6799	100	98543A112	0000	57905A43	00000
		6 to 8	5	0.74	10.85	0.7	250	Rockwell C46	DIN 6799	100	98543A113	0000	57905A44	00000
		7 to 9	6	0.74	11.8	0.7	300	Rockwell C46	DIN 6799	100	98543A114	0000	5728A2	00000
		8 to 11	7	0.94	13.8	0.9	400	Rockwell C46	DIN 6799	100	98543A115	0000	57905A46	00000
		9 to 12	8	1.05	15.75	1	560	Rockwell C46	DIN 6799	100	98543A116	00000	5728A2	00000


		10 to 14	9	1.15	18.2	1.1	670	Rockwell C46	DIN 6799	100	98543A117	00000	5728A2	00000
		11 to 15	10	1.25	19.7	1.2	780	Rockwell C46	DIN 6799	50	98543A218	0000	5728A2	00000
		13 to 18	12	1.35	22.7	1.3	1,050	Rockwell C46	DIN 6799	50	98543A219	0000	5728A2	00000
		16 to 24	15	1.55	28.7	1.5	1,750	Rockwell C46	DIN 6799	25	98543A120	00000	5728A2	00000
		20 to 31	19	1.8	36.5	1.75	2,470	Rockwell C46	DIN 6799	10	98543A121	0000	5728A2	00000
		25 to 38	24	2.05	43.5	2	3,370	Rockwell C46	DIN 6799	10	98543A222	00000	5728A2	00000
		32 to 42	30	2.55	51.3	2.5	5,170	Rockwell C46	DIN 6799	5	98543A123	0000	———	0


		Zinc-Plated Carbon Steel



				2.5 to 3	1.9	0.59	4.4	0.55	70	Rockwell C46	DIN 6799	100	90768A101	00000	———	0


				3 to 4	2.3	0.69	5.9	0.65	110	Rockwell C46	DIN 6799	100	90768A102	0000	57905A41	00000
				4 to 5	3.2	0.69	6.9	0.65	140	Rockwell C46	DIN 6799	100	90768A103	0000	57905A42	00000
				5 to 7	4	0.79	8.85	0.75	210	Rockwell C46	DIN 6799	100	90768A104	0000	57905A43	00000
				6 to 8	5	0.79	10.85	0.75	250	Rockwell C46	DIN 6799	100	90768A105	0000	57905A44	00000
				7 to 9	6	0.79	11.8	0.75	300	Rockwell C46	DIN 6799	100	90768A106	0000	5728A2	00000
				8 to 11	7	0.99	13.8	0.95	400	Rockwell C46	DIN 6799	100	90768A107	00000	5728A2	00000
				9 to 12	8	1.1	15.75	1.05	560	Rockwell C46	DIN 6799	100	90768A108	00000	5728A2	00000
				10 to 14	9	1.2	18.2	1.15	670	Rockwell C46	DIN 6799	50	90768A109	0000	5728A2	00000
				11 to 15	10	1.3	19.7	1.25	780	Rockwell C46	DIN 6799	50	90768A111	00000	5728A2	00000
				13 to 18	12	1.4	22.7	1.35	1,050	Rockwell C46	DIN 6799	50	90768A112	00000	5728A2	00000


				16 to 24	15	1.6	28.7	1.55	1,750	Rockwell C46	DIN 6799	10	90768A113	0000	5728A2	00000
				20 to 31	19	1.85	36.5	1.8	2,470	Rockwell C46	DIN 6799	10	90768A114	0000	5728A2	00000
				25 to 38	24	2.1	43.5	2.05	3,370	Rockwell C46	DIN 6799	10	90768A115	00000	5728A2	00000
				32 to 42	30	2.6	51.3	2.55	5,170	Rockwell C46	DIN 6799	5	90768A116	00000	5728A2	00000


				1.4122 Stainless Steel



						1.4 to 2	1.2	0.34	2.9	0.3	20	Not Rated	DIN 6799	50	98317A202	0000	———	0


						2 to 2.5	1.5	0.44	3.9	0.4	40	Not Rated	DIN 6799	50	98317A203	0000	———	0
						2.5 to 3	1.9	0.54	4.4	0.5	70	Not Rated	DIN 6799	50	98317A204	0000	———	0
						3 to 4	2.3	0.64	5.9	0.6	110	Rockwell C44	DIN 6799	50	98317A207	0000	57905A41	00000
						4 to 5	3.2	0.64	6.9	0.6	140	Rockwell C44	DIN 6799	50	98317A211	0000	57905A42	00000
						5 to 7	4	0.74	8.85	0.7	210	Rockwell C44	DIN 6799	50	98317A214	00000	57905A43	00000
6 to 8						5	0.74	10.85	0.7	250	Rockwell C44	DIN 6799	50	98317A217	00000	57905A44	00000
7 to 9	6					0.74	11.8	0.7	300	Rockwell C44	DIN 6799	25	98317A220	0000	5728A2	00000
8 to 11	7					0.94	13.8	0.9	400	Rockwell C44	DIN 6799	25	98317A224	00000	5728A2	00000
9 to 12	8					1.05	15.75	1	560	Rockwell C44	DIN 6799	10	98317A227	0000	5728A2	00000
10 to 14	9					1.15	18.2	1.1	670	Rockwell C44	DIN 6799	10	98317A231	0000	5728A2	00000


11 to 15	10					1.25	19.7	1.2	780	Rockwell C44	DIN 6799	5	98317A233	0000	5728A2	00000
13 to 18	12					1.35	22.7	1.3	1,050	Rockwell C44	DIN 6799	5	98317A237	0000	5728A2	00000
16 to 24	15					1.55	28.7	1.5	1,750	Rockwell C44	DIN 6799	1	98317A240	0000	5728A2	00000
20 to 31	19					1.8	36.5	1.75	2,470	Rockwell C47	DIN 6799	1	98317A241	0000	5728A2	00000
25 to 38	24					2.05	43.5	2	3,370	Rockwell C44	DIN 6799	1	98317A242	00000	5728A2	00000

High-Load External Retaining Rings

Thick rings manufactured for high-load applications, from power-generation systems to earth movers. Compared to standard external retaining rings, these usually have double the thrust load capacity. Open with retaining ring pliers, pass over the end of a shaft, then release them to spring into a groove.

Ring ID is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove		Ring
	For OD	Dia.	Wd.	ID	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		19/32"	0.555"	0.056"	0.543"	0.05"	4,560	Rockwell C48	DIN 471	10	98585A151	00000	5449A81	000000


		12 mm	11.5 mm	1.6 mm	11 mm	1.5 mm	2,540	Rockwell C47	DIN 471	25	90030A101	0000	5449A81	00000
		15 mm	14.3 mm	1.6 mm	13.8 mm	1.5 mm	3,480	Rockwell C47	DIN 471	25	90030A102	0000	5449A81	00000
		16 mm	15.2 mm	1.6 mm	14.7 mm	1.5 mm	3,750	Rockwell C47	DIN 471	50	90030A103	00000	5449A81	00000
		17 mm	16.2 mm	1.6 mm	15.7 mm	1.5 mm	4,040	Rockwell C47	DIN 471	50	90030A104	00000	5449A81	00000
		18 mm	17 mm	1.6 mm	16.5 mm	1.5 mm	5,980	Rockwell C47	DIN 471	25	90030A105	0000	5449A81	00000
		19 mm	18 mm	1.6 mm	17.5 mm	1.5 mm	5,980	Rockwell C47	DIN 471	25	90030A106	00000	5449A81	00000
		20 mm	19 mm	1.85 mm	18.5 mm	1.75 mm	8,160	Rockwell C47	DIN 471	25	90030A107	0000	5449A81	00000
		22 mm	21 mm	1.85 mm	20.5 mm	1.75 mm	8,090	Rockwell C47	DIN 471	10	90030A108	0000	5449A81	00000
		24 mm	22.9 mm	1.85 mm	22.2 mm	1.75 mm	7,680	Rockwell C47	DIN 471	10	90030A109	0000	5449A81	00000
		25 mm	23.9 mm	2.15 mm	23.2 mm	2 mm	10,100	Rockwell C47	DIN 471	10	90030A111	0000	5449A81	00000


		26 mm	24.4 mm	2.15 mm	23.6 mm	2 mm	9,890	Rockwell C47	DIN 471	10	90030A112	0000	5449A82	00000
		27 mm	25.5 mm	2.15 mm	24.7 mm	2 mm	10,200	Rockwell C47	DIN 471	10	90030A113	00000	5449A82	00000
		28 mm	26.6 mm	2.15 mm	25.9 mm	2 mm	12,800	Rockwell C47	DIN 471	10	90030A114	0000	5449A82	00000
		29 mm	27.6 mm	2.15 mm	26.9 mm	2 mm	12,700	Rockwell C47	DIN 471	25	90030A115	00000	5449A82	00000
		30 mm	28.6 mm	2.15 mm	27.9 mm	2 mm	12,800	Rockwell C47	DIN 471	10	90030A116	0000	5449A82	00000
		32 mm	30.3 mm	2.15 mm	29.6 mm	2 mm	12,800	Rockwell C47	DIN 471	1	90030A117	0000	5449A82	00000
		34 mm	32.3 mm	2.65 mm	31.5 mm	2.5 mm	19,500	Rockwell C47	DIN 471	5	90030A118	0000	5449A82	00000
		35 mm	33 mm	2.65 mm	32.2 mm	2.5 mm	19,300	Rockwell C47	DIN 471	5	90030A119	0000	5449A82	00000
		36 mm	34 mm	2.65 mm	33.2 mm	2.5 mm	22,800	Rockwell C47	DIN 471	1	90030A121	0000	5449A82	00000
		38 mm	36 mm	2.65 mm	35.2 mm	2.5 mm	22,700	Rockwell C47	DIN 471	5	90030A122	0000	5449A82	00000


		40 mm	37.5 mm	2.65 mm	36.5 mm	2.5 mm	23,300	Rockwell C47	DIN 471	1	90030A123	0000	5449A82	00000
		42 mm	39.5 mm	2.65 mm	38.5 mm	2.5 mm	22,900	Rockwell C47	DIN 471	1	90030A124	0000	5449A82	00000
		44 mm	41.5 mm	2.65 mm	40.5 mm	2.5 mm	22,700	Rockwell C47	DIN 471	1	90030A125	0000	5449A82	00000
		45 mm	42.5 mm	2.65 mm	41.5 mm	2.5 mm	22,400	Rockwell C47	DIN 471	1	90030A126	0000	5449A82	00000
		48 mm	45.5 mm	2.65 mm	44.5 mm	2.5 mm	22,700	Rockwell C47	DIN 471	1	90030A127	0000	5449A82	00000
		50 mm	47 mm	3.15 mm	45.8 mm	3 mm	37,000	Rockwell C44	DIN 471	1	90030A128	0000	5449A82	00000
		52 mm	49 mm	3.15 mm	47.8 mm	3 mm	37,000	Rockwell C44	DIN 471	1	90030A129	00000	5449A82	00000
		55 mm	52 mm	3.15 mm	50.8 mm	3 mm	36,100	Rockwell C44	DIN 471	1	90030A131	0000	5449A82	00000
		58 mm	55 mm	3.15 mm	53.8 mm	3 mm	35,900	Rockwell C44	DIN 471	1	90030A132	0000	5449A82	00000
		60 mm	57 mm	3.15 mm	55.8 mm	3 mm	35,000	Rockwell C44	DIN 471	1	90030A133	0000	5449A82	00000


		65 mm	62 mm	4.15 mm	60.8 mm	4 mm	77,700	Rockwell C44	DIN 471	1	90030A134	00000	5449A83	00000
		75 mm	72 mm	4.15 mm	70.5 mm	4 mm	74,800	Rockwell C44	DIN 471	1	90030A141	0000	5449A83	00000
		80 mm	76.5 mm	4.15 mm	74.5 mm	4 mm	73,700	Rockwell C44	DIN 471	1	90030A135	00000	5449A83	00000
		90 mm	86.5 mm	4.15 mm	84.5 mm	4 mm	86,700	Rockwell C44	DIN 471	1	90030A142	0000	5449A83	00000
		100 mm	96.5 mm	4.15 mm	94.5 mm	4 mm	82,700	Rockwell C44	DIN 471	1	90030A143	0000	5449A83	00000

Spiral Internal Retaining Rings

1 Turn

Coiled so you can install by hand without any tools. The coiling also keeps these rings from flying away during installation. Just insert one end into the groove, then wind the rest of the ring into place.

Ring OD is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

1 Turn—Slide into place with one twist. These rings are useful in areas where there's limited space for installation.

		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	No. of Turns	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		14	14.6	1.1	14.74	0.94	2,560	1	DIN 472	10	92131A510	00000


		15	15.7	1.1	15.85	0.94	2,740	1	DIN 472	10	92131A520	0000
		16	16.8	1.1	16.9	0.94	2,920	1	DIN 472	10	92131A530	0000
		17	17.8	1.1	17.97	0.94	3,110	1	DIN 472	10	92131A540	0000
		18	19	1.1	19.18	0.94	3,290	1	DIN 472	10	92131A550	0000
		19	20	1.1	20.25	0.94	3,470	1	DIN 472	10	92131A560	0000
		20	21	1.1	21.2	0.94	3,650	1	DIN 472	5	92131A570	00000
		22	23	1.1	23.22	0.94	4,020	1	DIN 472	5	92131A580	00000
		24	25.2	1.3	25.4	1.15	5,370	1	DIN 472	5	92131A590	00000
		25	26.2	1.3	26.45	1.15	5,600	1	DIN 472	5	92131A610	00000
		26	27.2	1.3	27.46	1.15	5,820	1	DIN 472	5	92131A620	00000


		28	29.4	1.3	29.68	1.15	6,270	1	DIN 472	5	92131A630	00000
		30	31.4	1.3	31.79	1.15	6,720	1	DIN 472	5	92131A640	00000
		32	33.7	1.3	33.93	1.15	7,170	1	DIN 472	5	92131A650	00000
		34	35.7	1.6	36.04	1.44	9,060	1	DIN 472	5	92131A660	00000
		35	37	1.6	37.35	1.44	9,320	1	DIN 472	5	92131A670	00000
		36	38	1.6	38.36	1.44	9,590	1	DIN 472	5	92131A680	00000
		38	40	1.6	40.44	1.44	10,100	1	DIN 472	5	92131A690	00000
		40	42.5	1.85	42.86	1.69	12,500	1	DIN 472	5	92131A710	00000
		45	47.5	1.85	47.88	1.69	14,000	1	DIN 472	5	92131A720	00000
		50	53	2.15	53.5	1.93	16,900	1	DIN 472	5	92131A730	00000


		55	58	2.15	58.55	1.93	18,600	1	DIN 472	1	92131A740	0000
		60	63	2.15	63.6	1.93	20,300	1	DIN 472	1	92131A750	0000
		65	68	2.65	68.7	2.41	26,100	1	DIN 472	1	92131A760	0000
		70	73	2.65	73.64	2.41	28,200	1	DIN 472	1	92131A770	0000
		75	78	2.65	78.75	2.41	30,200	1	DIN 472	1	92131A780	0000


		18-8 Stainless Steel



				13	13.6	1.1	13.73	0.94	2,380	1	DIN 472	5	92131A110	0000


				14	14.6	1.1	14.74	0.94	2,560	1	DIN 472	5	92131A120	0000
				15	15.7	1.1	15.85	0.94	2,740	1	DIN 472	5	92131A130	0000
				16	16.8	1.1	16.9	0.94	2,920	1	DIN 472	5	92131A140	0000
				17	17.8	1.1	17.97	0.94	3,110	1	DIN 472	5	92131A150	00000
				18	19	1.1	19.18	0.94	3,290	1	DIN 472	5	92131A160	00000
				19	20	1.1	20.25	0.94	3,470	1	DIN 472	5	92131A170	00000
				20	21	1.1	21.2	0.94	3,650	1	DIN 472	5	92131A180	00000
				22	23	1.1	23.22	0.94	4,020	1	DIN 472	5	92131A190	00000
				24	25.2	1.3	25.4	1.15	5,370	1	DIN 472	5	92131A210	00000
				25	26.2	1.3	26.45	1.15	5,600	1	DIN 472	1	92131A220	0000


				26	27.2	1.3	27.46	1.15	5,820	1	DIN 472	1	92131A230	0000
				28	29.4	1.3	29.68	1.15	6,270	1	DIN 472	1	92131A240	0000
				30	31.4	1.3	31.79	1.15	6,720	1	DIN 472	1	92131A250	0000
				32	33.7	1.3	33.93	1.15	7,170	1	DIN 472	1	92131A260	0000
				34	35.7	1.6	36.04	1.44	9,060	1	DIN 472	1	92131A270	0000
				35	37	1.6	37.35	1.44	9,320	1	DIN 472	1	92131A280	0000
				36	38	1.6	38.36	1.44	9,590	1	DIN 472	1	92131A290	0000
				38	40	1.6	40.44	1.44	10,100	1	DIN 472	1	92131A310	0000
40				42.5	1.85	42.86	1.69	12,500	1	DIN 472	1	92131A320	0000
45	47.5			1.85	47.88	1.69	14,000	1	DIN 472	1	92131A330	0000


50	53			2.15	53.5	1.93	16,900	1	DIN 472	1	92131A340	0000
55	58			2.15	58.55	1.93	18,600	1	DIN 472	1	92131A350	0000
60	63			2.15	63.6	1.93	20,300	1	DIN 472	1	92131A360	00000
65	68			2.65	68.7	2.41	26,100	1	DIN 472	1	92131A370	00000
70	73			2.65	73.64	2.41	28,200	1	DIN 472	1	92131A380	00000
75	78			2.65	78.75	2.41	30,200	1	DIN 472	1	92131A390	00000
80	83.5			2.65	84.3	2.41	32,200	1	DIN 472	1	92131A410	00000
85	88.5			3.15	89.35	2.91	39,300	1	DIN 472	1	92131A420	00000
90	93.5			3.15	94.7	2.91	41,600	1	DIN 472	1	92131A430	00000
95	98.5			3.15	99.62	2.91	43,900	1	DIN 472	1	92131A440	00000


100	103.5			3.15	104.5	2.91	46,300	1	DIN 472	1	92131A450	00000

High-Load Internal Retaining Rings

Thick rings manufactured for high-load applications, from power-generation systems to earth movers. Compared to the standard internal retaining rings, these have up to twice the thrust load capacity. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		20	21	1.6	21.5	1.5	3,640	Rockwell C47	DIN 472	25	97250A110	00000	5449A92	000000


		22	23	1.6	23.5	1.5	4,040	Rockwell C47	DIN 472	25	97250A120	0000	5449A92	00000
		28	29.4	1.6	30.1	1.5	4,670	Rockwell C47	DIN 472	25	97250A130	00000	5449A92	00000
		30	31.4	1.6	32.1	1.5	4,810	Rockwell C47	DIN 472	25	97250A140	00000	5449A92	00000
		32	33.7	1.6	34.4	1.5	4,810	Rockwell C47	DIN 472	25	97250A150	0000	5449A92	00000
		35	37	1.85	37.8	1.75	8,220	Rockwell C47	DIN 472	25	97250A160	00000	5449A92	00000
		38	40	1.85	40.8	1.75	8,610	Rockwell C47	DIN 472	10	97250A170	00000	5449A92	00000
		40	42.5	2.15	43.5	2	13,100	Rockwell C47	DIN 472	10	97250A180	00000	5449A92	00000
		45	47.5	2.15	48.5	2	12,700	Rockwell C47	DIN 472	5	97250A190	00000	5449A93	00000
		52	55	2.65	56.2	2.5	21,200	Rockwell C47	DIN 472	5	97250A210	00000	5449A93	00000
		55	58	2.65	59.2	2.5	21,200	Rockwell C47	DIN 472	5	97250A220	00000	5449A93	00000


		60	63	3.15	64.2	3	30,700	Rockwell C47	DIN 472	5	97250A230	00000	5449A93	00000
		62	65	3.15	66.2	3	30,700	Rockwell C47	DIN 472	5	97250A240	00000	5449A93	00000
		63	66	3.15	67.2	3	30,700	Rockwell C47	DIN 472	5	97250A250	00000	5449A93	00000
		64	67	3.15	68.2	3	30,700	Rockwell C47	DIN 472	5	97250A260	00000	5449A93	00000
		65	68	3.15	69.2	3	39,100	Rockwell C47	DIN 472	5	97250A270	00000	5449A93	00000
		70	73	3.15	74.5	3	38,400	Rockwell C47	DIN 472	5	97250A280	00000	5449A93	00000

Spiral External Retaining Rings

1 Turn

Ring ID is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

1 Turn—Slide into place with one twist. These rings are useful in areas where there's limited space for installation.

		For Groove, mm		Ring, mm
	For OD, mm	Dia.	Wd.	ID	Thk.	Thrust Load Cap., lbf	No. of Turns	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		15	14.3	1.1	14.15	0.94	2,740	1	DIN 471	10	97145A102	00000


		16	15.2	1.1	14.98	0.94	2,920	1	DIN 471	10	97145A103	0000
		17	16.2	1.1	16.06	0.94	3,110	1	DIN 471	10	97145A104	0000
		18	17	1.3	16.82	1.15	4,030	1	DIN 471	5	97145A105	00000
		19	18	1.3	17.81	1.15	4,250	1	DIN 471	5	97145A106	00000
		20	19	1.3	18.8	1.15	4,470	1	DIN 471	5	97145A107	00000
		22	21	1.3	20.83	1.15	4,930	1	DIN 471	5	97145A108	00000
		24	22.9	1.3	22.5	1.15	5,370	1	DIN 471	5	97145A109	00000
		25	23.9	1.3	23.7	1.15	5,600	1	DIN 471	5	97145A110	00000
		28	26.6	1.6	26.32	1.44	7,450	1	DIN 471	5	97145A112	00000
		30	28.6	1.6	28.35	1.44	7,990	1	DIN 471	5	97145A113	00000


		32	30.3	1.6	29.87	1.44	8,520	1	DIN 471	5	97145A114	00000
		35	33	1.6	32.57	1.44	9,320	1	DIN 471	5	97145A115	00000
		38	36	1.85	35.62	1.69	11,800	1	DIN 471	5	97145A116	00000
		40	37.5	1.85	37.02	1.69	12,500	1	DIN 471	5	97145A117	00000
		45	42.5	1.85	42.05	1.69	14,000	1	DIN 471	5	97145A118	00000
		50	47	2.15	46.5	1.93	16,900	1	DIN 471	5	97145A119	00000
		55	52	2.15	51.45	1.93	18,600	1	DIN 471	1	97145A120	0000
		60	57	2.15	56.55	1.93	20,300	1	DIN 471	1	97145A121	0000
		75	72	2.65	71.25	2.41	30,200	1	DIN 471	1	97145A122	0000


		18-8 Stainless Steel



				13	12.4	1.1	12.27	0.94	2,380	1	DIN 471	5	92237A110	0000


				14	13.4	1.1	13.31	0.94	2,560	1	DIN 471	5	92237A120	0000
				15	14.3	1.1	14.15	0.94	2,740	1	DIN 471	5	92237A130	0000
				16	15.2	1.1	14.98	0.94	2,920	1	DIN 471	5	92237A140	0000
				17	16.2	1.1	16.06	0.94	3,110	1	DIN 471	5	92237A150	0000
				19	18	1.3	17.81	1.15	4,250	1	DIN 471	5	92237A170	00000
				20	19	1.3	18.8	1.15	4,470	1	DIN 471	5	92237A180	00000
				22	21	1.3	20.83	1.15	4,930	1	DIN 471	1	92237A190	0000
				24	22.9	1.3	22.5	1.15	5,370	1	DIN 471	1	92237A210	0000
				25	23.9	1.3	23.7	1.15	5,600	1	DIN 471	1	92237A220	0000
				26	24.9	1.3	24.64	1.15	5,820	1	DIN 471	1	92237A230	0000


				28	26.6	1.6	26.32	1.44	7,450	1	DIN 471	1	92237A240	0000
				30	28.6	1.6	28.35	1.44	7,990	1	DIN 471	1	92237A250	0000
				32	30.3	1.6	29.87	1.44	8,520	1	DIN 471	1	92237A260	0000
				34	32.3	1.6	31.96	1.44	9,060	1	DIN 471	1	92237A270	0000
				35	33	1.6	32.57	1.44	9,320	1	DIN 471	1	92237A280	0000
				36	34	1.85	33.64	1.69	11,200	1	DIN 471	1	92237A290	0000
				38	36	1.85	35.62	1.69	11,800	1	DIN 471	1	92237A310	0000
				40	37.5	1.85	37.02	1.69	12,500	1	DIN 471	1	92237A320	0000
				45	42.5	1.85	42.05	1.69	14,000	1	DIN 471	1	92237A330	0000
				50	47	2.15	46.5	1.93	16,900	1	DIN 471	1	92237A340	0000


				55	52	2.15	51.45	1.93	18,600	1	DIN 471	1	92237A350	0000
				60	57	2.15	56.55	1.93	20,300	1	DIN 471	1	92237A360	00000
				65	62	2.65	61.35	2.41	26,200	1	DIN 471	1	92237A370	00000
				70	67	2.65	66.22	2.41	28,200	1	DIN 471	1	92237A380	00000
80				76.5	2.65	75.7	2.41	32,200	1	DIN 471	1	92237A410	00000
85	81.5			3.15	80.65	2.91	39,400	1	DIN 471	1	92237A420	00000
90	86.5			3.15	85.8	2.91	41,800	1	DIN 471	1	92237A430	00000
95	91.5			3.15	90.68	2.91	44,100	1	DIN 471	1	92237A440	00000
100	96.5			3.15	95.5	2.91	46,400	1	DIN 471	1	92237A450	00000

Tight-Clearance Inverted External Retaining Rings

The lugs on these rings point inward, so they won't snag on other parts and have better clearance than standard external rings. Shaped in the most common style, they are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Open with retaining ring pliers, pass over the end of a shaft, then release them to spring into a groove.

Ring ID is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For OD, mm	Dia.	Wd.	ID	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		12	11.5	1.1	11	1	1,010	Rockwell C47	DIN 471	50	97213A101	000000	5449A81	000000


		13	12.4	1.1	11.9	1	1,230	Rockwell C47	DIN 471	50	97213A102	00000	5449A81	00000
		14	13.4	1.1	12.9	1	1,340	Rockwell C47	DIN 471	50	97213A103	00000	5449A81	00000
		15	14.3	1.1	13.8	1	1,460	Rockwell C47	DIN 471	50	97213A104	00000	5449A81	00000
		16	15.2	1.1	14.7	1	1,570	Rockwell C47	DIN 471	25	97213A105	0000	5449A81	00000
		17	16.2	1.1	15.7	1	1,820	Rockwell C47	DIN 471	25	97213A106	0000	5449A81	00000
		18	17	1.3	16.5	1.2	3,320	Rockwell C47	DIN 471	25	97213A107	00000	5449A81	00000
		20	19	1.3	18.5	1.2	3,280	Rockwell C47	DIN 471	25	97213A108	00000	5449A81	00000
		22	21	1.3	20.5	1.2	3,190	Rockwell C47	DIN 471	10	97213A109	0000	5449A81	00000
		23	22	1.3	21.5	1.2	3,140	Rockwell C47	DIN 471	10	97213A110	0000	5449A81	00000
		24	22.9	1.3	22.2	1.2	3,140	Rockwell C47	DIN 471	10	97213A111	0000	5449A81	00000


		25	23.9	1.3	23.2	1.2	3,160	Rockwell C47	DIN 471	10	97213A112	0000	5449A81	00000
		26	24.9	1.3	24.2	1.2	3,160	Rockwell C47	DIN 471	10	97213A113	0000	5449A82	00000
		30	28.6	1.6	27.9	1.5	6,180	Rockwell C47	DIN 471	10	97213A114	00000	5449A82	00000
		32	30.3	1.6	29.6	1.5	6,060	Rockwell C47	DIN 471	10	97213A115	00000	5449A82	00000
		35	33	1.6	32.2	1.5	5,970	Rockwell C47	DIN 471	10	97213A116	00000	5449A82	00000
		38	35.8	1.85	34.5	1.75	9,440	Rockwell C47	DIN 471	10	97213A117	00000	5449A82	00000

Tight-Clearance Inverted Internal Retaining Rings

The lugs on these rings point outward, so they won't snag on other parts and have better clearance than standard internal rings. Shaped in the most common style, they are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		12	12.6	0.7	13.1	0.6	400	Rockwell C47	DIN 472	50	90442A201	000000	5449A91	000000


		13	13.6	0.7	14.5	0.6	400	Rockwell C47	DIN 472	50	90442A202	00000	5449A91	00000
		15	15.7	0.9	16.1	0.8	740	Rockwell C47	DIN 472	50	90442A203	00000	5449A91	00000
		16	16.8	1.1	17.3	1	1,160	Rockwell C47	DIN 472	50	90442A204	00000	5449A91	00000
		17	17.8	1.1	18.3	1	1,300	Rockwell C47	DIN 472	50	90442A205	00000	5449A91	00000
		18	19	1.1	19.5	1	1,410	Rockwell C47	DIN 472	25	90442A206	0000	5449A91	00000
		19	20	1.1	20.5	1	1,480	Rockwell C47	DIN 472	25	90442A207	0000	5449A91	00000
		20	21	1.1	21.5	1	1,570	Rockwell C47	DIN 472	25	90442A208	0000	5449A91	00000
		21	22	1.1	22.5	1	1,660	Rockwell C47	DIN 472	25	90442A209	0000	5449A91	00000
		22	23	1.1	23.5	1	1,680	Rockwell C47	DIN 472	25	90442A210	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,250	Rockwell C47	DIN 472	25	90442A211	0000	5449A91	00000


		25	26.2	1.3	26.9	1.2	3,320	Rockwell C47	DIN 472	25	90442A212	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,430	Rockwell C47	DIN 472	25	90442A213	00000	5449A92	00000
		27	28.4	1.3	29.1	1.2	3,370	Rockwell C47	DIN 472	25	90442A214	00000	5449A92	00000
		28	29.4	1.3	30.1	1.2	3,430	Rockwell C47	DIN 472	25	90442A215	00000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,340	Rockwell C47	DIN 472	25	90442A216	00000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,160	Rockwell C47	DIN 472	10	90442A217	0000	5449A92	00000
		33	34.7	1.3	35.5	1.2	3,100	Rockwell C47	DIN 472	10	90442A218	0000	5449A92	00000
		34	35.7	1.6	36.5	1.5	5,390	Rockwell C47	DIN 472	10	90442A219	0000	5449A92	00000
		35	37	1.6	37.8	1.5	5,930	Rockwell C47	DIN 472	10	90442A220	0000	5449A92	00000
		36	38	1.6	38.8	1.5	6,180	Rockwell C47	DIN 472	10	90442A221	0000	5449A92	00000


		38	40	1.6	40.8	1.5	6,290	Rockwell C47	DIN 472	10	90442A222	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,220	Rockwell C47	DIN 472	10	90442A223	00000	5449A92	00000
		42	44.5	1.85	45.5	1.75	10,220	Rockwell C47	DIN 472	10	90442A224	00000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,890	Rockwell C47	DIN 472	10	90442A225	00000	5449A92	00000
		48	50.5	1.85	51.5	1.75	10,790	Rockwell C47	DIN 472	10	90442A226	00000	5449A92	00000
		50	53	2.15	54.2	2	15,510	Rockwell C44	DIN 472	1	90442A227	0000	5449A92	00000
		52	55	2.15	56.2	2	14,940	Rockwell C44	DIN 472	10	90442A228	00000	5449A92	00000
		58	61	2.15	62.2	2	14,380	Rockwell C44	DIN 472	1	90442A229	0000	5449A92	00000

High-Load Spiral External Retaining Rings

Thicker than standard external spiral rings, these have at least 20% more thrust load capacity. No tools needed for installation. Spread apart, insert one end into the groove, then collapse the rest of it into place.

Ring ID is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

		For Groove, mm		Ring, mm
	For OD, mm	Dia.	Wd.	ID	Thk.	Thrust Load Cap., lbf	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		13	12.4	1.1	12.27	0.99	3,020	DIN 471	10	92347A460	000000


		14	13.4	1.1	13.26	0.99	3,260	DIN 471	10	92347A470	00000
		15	14.3	1.1	14.15	0.99	3,490	DIN 471	10	92347A480	00000
		16	15.2	1.1	15.04	0.99	3,720	DIN 471	10	92347A490	00000
		17	16.2	1.1	16.04	0.99	3,960	DIN 471	5	92347A510	00000
		18	17	1.3	16.83	1.14	4,190	DIN 471	5	92347A520	00000
		19	18	1.3	17.83	1.14	4,420	DIN 471	5	92347A530	00000
		20	19	1.3	18.82	1.14	4,660	DIN 471	5	92347A540	00000
		22	21	1.3	20.78	1.14	5,120	DIN 471	5	92347A550	00000
		24	22.9	1.3	22.66	1.14	5,590	DIN 471	5	92347A560	00000
		25	23.9	1.3	23.65	1.14	5,820	DIN 471	5	92347A570	00000


		26	24.9	1.3	24.64	1.14	6,060	DIN 471	5	92347A580	00000
		28	26.6	1.6	26.34	1.44	8,240	DIN 471	5	92347A590	00000
		30	28.6	1.6	28.32	1.44	8,830	DIN 471	5	92347A610	00000
		32	30.3	1.6	30	1.44	9,420	DIN 471	5	92347A620	00000
		34	32.3	1.6	31.98	1.44	10,000	DIN 471	5	92347A630	00000
		35	33	1.6	32.66	1.44	10,300	DIN 471	5	92347A640	00000
		36	34	1.85	33.65	1.69	12,400	DIN 471	5	92347A650	00000
		40	37.5	1.85	37.11	1.69	13,800	DIN 471	5	92347A660	00000
		45	42.5	1.85	42.06	1.69	15,500	DIN 471	5	92347A670	00000
		50	47	2.15	46.53	1.93	19,700	DIN 471	1	92347A680	0000


		55	52	2.15	51.49	1.93	21,700	DIN 471	1	92347A690	0000
		60	57	2.15	56.42	1.93	23,600	DIN 471	1	92347A710	0000
		65	62	2.65	61.39	2.41	30,500	DIN 471	1	92347A720	0000
		70	67	2.65	66.34	2.41	32,800	DIN 471	1	92347A730	0000
		75	72	2.65	71.33	2.41	35,200	DIN 471	1	92347A740	0000
		80	76.5	2.65	75.81	2.41	37,500	DIN 471	1	92347A750	0000
		85	81.5	3.15	80.8	2.91	48,100	DIN 471	1	92347A760	0000
		90	86.5	3.15	85.8	2.91	51,000	DIN 471	1	92347A770	00000
		95	91.5	3.15	90.8	2.91	53,800	DIN 471	1	92347A780	00000
		100	96.5	3.15	95.79	2.91	56,600	DIN 471	1	92347A790	00000


		18-8 Stainless Steel



				13	12.4	1.1	12.27	0.99	3,020	DIN 471	5	92347A110	00000


				14	13.4	1.1	13.26	0.99	3,260	DIN 471	5	92347A120	00000
				15	14.3	1.1	14.15	0.99	3,490	DIN 471	5	92347A130	00000
				16	15.2	1.1	15.04	0.99	3,720	DIN 471	5	92347A140	00000
				17	16.2	1.1	16.04	0.99	3,960	DIN 471	1	92347A150	0000
				18	17	1.3	16.83	1.14	4,190	DIN 471	1	92347A160	0000
				19	18	1.3	17.83	1.14	4,420	DIN 471	1	92347A170	0000
				20	19	1.3	18.82	1.14	4,660	DIN 471	1	92347A180	0000
				22	21	1.3	20.78	1.14	5,120	DIN 471	1	92347A190	0000
				24	22.9	1.3	22.66	1.14	5,590	DIN 471	1	92347A210	0000
				25	23.9	1.3	23.65	1.14	5,820	DIN 471	1	92347A220	0000


				26	24.9	1.3	24.64	1.14	6,060	DIN 471	1	92347A230	0000
				28	26.6	1.6	26.34	1.44	8,240	DIN 471	1	92347A240	0000
				30	28.6	1.6	28.32	1.44	8,830	DIN 471	1	92347A250	0000
32				30.3	1.6	30	1.44	9,420	DIN 471	1	92347A260	0000
34	32.3			1.6	31.98	1.44	10,000	DIN 471	1	92347A270	0000
35	33			1.6	32.66	1.44	10,300	DIN 471	1	92347A280	0000
36	34			1.85	33.65	1.69	12,400	DIN 471	1	92347A290	0000
38	36			1.85	35.64	1.69	13,100	DIN 471	1	92347A310	0000
40	37.5			1.85	37.11	1.69	13,800	DIN 471	1	92347A320	0000
45	42.5			1.85	42.06	1.69	15,500	DIN 471	1	92347A330	0000


50	47			2.15	46.53	1.93	19,700	DIN 471	1	92347A340	00000
55	52			2.15	51.49	1.93	21,700	DIN 471	1	92347A350	00000
60	57			2.15	56.42	1.93	23,600	DIN 471	1	92347A360	00000
65	62			2.65	61.39	2.41	30,500	DIN 471	1	92347A370	00000
70	67			2.65	66.34	2.41	32,800	DIN 471	1	92347A380	00000
75	72			2.65	71.33	2.41	35,200	DIN 471	1	92347A390	00000
80	76.5			2.65	75.81	2.41	37,500	DIN 471	1	92347A410	00000
85	81.5			3.15	80.8	2.91	48,100	DIN 471	1	92347A420	00000
90	86.5			3.15	85.8	2.91	51,000	DIN 471	1	92347A430	00000
95	91.5			3.15	90.8	2.91	53,800	DIN 471	1	92347A440	00000


100	96.5			3.15	95.79	2.91	56,600	DIN 471	1	92347A450	00000

High-Load Spiral Internal Retaining Rings

Stand up to stronger forces with more layers than the standard internal spiral option. These rings usually have 20% more thrust load capacity than the standard. No tools needed for installation. Spread apart, insert one end into the groove, then collapse the rest of it into place.

Ring OD is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		13	13.6	1.1	13.72	0.99	3,020	DIN 472	10	92248A460	000000


		14	14.6	1.1	14.75	0.99	3,260	DIN 472	10	92248A470	00000
		15	15.7	1.1	15.85	0.99	3,490	DIN 472	10	92248A480	00000
		16	16.8	1.1	16.97	0.99	3,720	DIN 472	10	92248A490	00000
		17	17.8	1.1	17.98	0.99	3,960	DIN 472	10	92248A510	00000
		18	19	1.1	19.18	0.99	4,190	DIN 472	10	92248A520	00000
		19	20	1.1	20.19	0.99	4,420	DIN 472	10	92248A530	00000
		20	21	1.1	21.21	0.99	4,660	DIN 472	5	92248A540	00000
		22	23	1.1	23.23	0.99	5,120	DIN 472	5	92248A550	00000
		24	25.2	1.3	25.45	1.14	5,590	DIN 472	5	92248A560	00000
		25	26.2	1.3	26.45	1.14	5,820	DIN 472	5	92248A570	00000


		26	27.2	1.3	27.48	1.14	6,060	DIN 472	5	92248A580	00000
		28	29.4	1.3	29.69	1.14	6,520	DIN 472	5	92248A590	00000
		30	31.4	1.3	31.71	1.14	6,990	DIN 472	5	92248A610	00000
		32	33.7	1.3	34.04	1.14	7,460	DIN 472	5	92248A620	00000
		34	35.7	1.6	36.07	1.44	10,000	DIN 472	5	92248A630	00000
		35	37	1.6	37.38	1.44	10,300	DIN 472	5	92248A640	00000
		36	38	1.6	38.39	1.44	10,600	DIN 472	5	92248A650	00000
		38	40	1.6	40.41	1.44	11,100	DIN 472	5	92248A660	00000
		40	42.5	1.85	42.93	1.69	13,800	DIN 472	5	92248A670	00000
		45	47.5	1.85	47.98	1.69	15,500	DIN 472	5	92248A680	00000


		50	53	2.15	53.54	1.93	19,700	DIN 472	5	92248A690	00000
		55	58	2.15	58.57	1.93	21,700	DIN 472	1	92248A710	0000
		60	63	2.15	63.63	1.93	23,600	DIN 472	1	92248A720	0000
		65	68	2.65	68.67	2.41	30,500	DIN 472	1	92248A730	0000
		70	73	2.65	73.67	2.41	32,800	DIN 472	1	92248A740	0000
		75	78	2.65	78.68	2.41	35,200	DIN 472	1	92248A750	0000
		80	83.5	2.65	84.19	2.41	37,500	DIN 472	1	92248A760	0000
		85	88.5	3.15	89.2	2.91	48,100	DIN 472	1	92248A770	0000
		90	93.5	3.15	94.21	2.91	51,000	DIN 472	1	92248A780	0000
		95	98.5	3.15	99.24	2.91	53,800	DIN 472	1	92248A790	00000


		100	103.5	3.15	104.29	2.91	56,600	DIN 472	1	92248A810	00000


		18-8 Stainless Steel



				13	13.6	1.1	13.72	0.99	3,020	DIN 472	5	92248A110	00000


				14	14.6	1.1	14.75	0.99	3,260	DIN 472	5	92248A120	00000
				15	15.7	1.1	15.85	0.99	3,490	DIN 472	5	92248A130	00000
				16	16.8	1.1	16.97	0.99	3,720	DIN 472	5	92248A140	00000
				17	17.8	1.1	17.98	0.99	3,960	DIN 472	5	92248A150	00000
				18	19	1.1	19.18	0.99	4,190	DIN 472	5	92248A160	00000
				19	20	1.1	20.19	0.99	4,420	DIN 472	5	92248A170	00000
				20	21	1.1	21.21	0.99	4,660	DIN 472	1	92248A180	0000
				22	23	1.1	23.23	0.99	5,120	DIN 472	1	92248A190	0000
				24	25.2	1.3	25.45	1.14	5,590	DIN 472	1	92248A210	0000
				25	26.2	1.3	26.45	1.14	5,820	DIN 472	1	92248A220	0000


26				27.2	1.3	27.48	1.14	6,060	DIN 472	1	92248A230	0000
28	29.4			1.3	29.69	1.14	6,520	DIN 472	1	92248A240	0000
30	31.4			1.3	31.71	1.14	6,990	DIN 472	1	92248A250	0000
32	33.7			1.3	34.04	1.14	7,460	DIN 472	1	92248A260	0000
34	35.7			1.6	36.07	1.44	10,000	DIN 472	1	92248A270	0000
35	37			1.6	37.38	1.44	10,300	DIN 472	1	92248A280	0000
36	38			1.6	38.39	1.44	10,600	DIN 472	1	92248A290	0000
38	40			1.6	40.41	1.44	11,100	DIN 472	1	92248A310	0000
40	42.5			1.85	42.93	1.69	13,800	DIN 472	1	92248A320	0000
45	47.5			1.85	47.98	1.69	15,500	DIN 472	1	92248A330	0000


50	53			2.15	53.54	1.93	19,700	DIN 472	1	92248A340	0000
55	58			2.15	58.57	1.93	21,700	DIN 472	1	92248A350	00000
60	63			2.15	63.63	1.93	23,600	DIN 472	1	92248A360	00000
65	68			2.65	68.67	2.41	30,500	DIN 472	1	92248A370	00000
70	73			2.65	73.67	2.41	32,800	DIN 472	1	92248A380	00000
75	78			2.65	78.68	2.41	35,200	DIN 472	1	92248A390	00000
80	83.5			2.65	84.19	2.41	37,500	DIN 472	1	92248A410	00000
85	88.5			3.15	89.2	2.91	48,100	DIN 472	1	92248A420	00000
90	93.5			3.15	94.21	2.91	51,000	DIN 472	1	92248A430	00000
95	98.5			3.15	99.24	2.91	53,800	DIN 472	1	92248A440	00000


100	103.5			3.15	104.29	2.91	56,600	DIN 472	1	92248A450	00000

Side-Mount, Tapered External, Internal Retaining Rings Assortment

Cover all bases with multiple retaining ring types and styles. Use the retaining ring pliers to install external rings onto shafts and internal rings into bores and housings. When access to a shaft is limited, install the E-Style rings from the side of the shaft and lock them into the groove.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Includes	Side-Mount Retaining Ring Style	Tools Included	Specs. Met		Each
Phosphate-Coated Carbon Steel



	380	120 External Retaining Rings (For 8 mm to 20 mm OD) 120 Internal Retaining Rings (For 8 mm to 20 mm ID) 140 E-Style Side-Mount External Retaining Rings (For 3 mm to 12 mm OD)	E	Retaining Ring Pliers	DIN 6799	93352A100	0000000

Tight-Hold Internal-Tooth Internal Retaining Rings

Internal teeth prevent your ring from tilting, bending, and falling off. When there's side clearance from a chamfered end, for instance, a standard ring may tilt over time and lose its hold. Commonly used to retain shafts in roller drum systems and other heavy duty equipment.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 984	25	97244A111	00000	5449A91	000000


		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 984	25	97244A112	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 984	25	97244A113	0000	5449A91	00000
		26	27.2	1.3	28.5	1.2	3,100	Rockwell C47	DIN 984	25	97244A114	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,980	Rockwell C47	DIN 984	25	97244A115	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,070	Rockwell C47	DIN 984	25	97244A116	00000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 984	25	97244A117	00000	5449A92	00000
		35	37	1.6	37.8	1.5	6,040	Rockwell C47	DIN 984	25	97244A118	00000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 984	10	97244A119	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,020	Rockwell C47	DIN 984	10	97244A121	00000	5449A92	00000
		44	46.5	1.85	47.5	1.75	9,730	Rockwell C47	DIN 984	10	97244A122	00000	5449A92	00000


		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 984	10	97244A123	00000	5449A92	00000
		50	53	2.15	54.2	2	13,660	Rockwell C44	DIN 984	1	97244A124	0000	5449A92	00000
		52	55	2.15	56.2	2	13,530	Rockwell C44	DIN 984	10	97244A125	00000	5449A92	00000
		54	57	2.15	58.2	2	13,530	Rockwell C44	DIN 984	10	97244A126	00000	5449A92	00000
		55	58	2.15	59.2	2	13,550	Rockwell C44	DIN 984	10	97244A127	00000	5449A92	00000
		57	60	2.15	61.2	2	13,660	Rockwell C44	DIN 984	5	97244A128	0000	5449A92	00000
		62	65	2.15	66.2	2	13,690	Rockwell C44	DIN 984	5	97244A129	0000	5449A93	00000
		65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 984	5	97244A131	00000	5449A93	00000
		72	75	2.65	76.5	2.5	26,750	Rockwell C44	DIN 984	1	97244A132	0000	5449A93	00000
		80	83.5	2.65	85.5	2.5	26,970	Rockwell C44	DIN 984	5	97244A133	00000	5449A93	00000


		90	93.5	3.15	95.5	3	44,730	Rockwell C44	DIN 984	1	97244A134	00000	5449A93	00000

External Retaining Rings Assortment

Stock up on our go-to external retaining rings in a range of sizes. Open with retaining ring pliers, pass over the end of a shaft, and release to spring the ring into the groove.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

Zinc-Plated Carbon Steel—These rings are strong with good wear resistance. They provide some corrosion resistance, but not as much as stainless steel rings.

1.4122 Stainless Steel—Corrosion and wear resistant rings that won't break down from rubbing against other metal.

	Includes	Specs. Met		Each
Phosphate-Coated Carbon Steel



	240	For 5 mm to 24 mm OD	DIN 471	98875A150	0000000


	460	For 3 mm to 60 mm OD	DIN 471	98552A328	000000


	Zinc-Plated Carbon Steel



			240	For 5 mm to 24 mm OD	DIN 471	98552A503	00000


			440	For 5 mm to 60 mm OD	DIN 471	98552A985	000000


			1.4122 Stainless Steel



					180	For 5 mm to 24 mm OD	DIN 471	98552A257	000000

Internal Retaining Rings Assortment

Stock up on our go-to internal retaining rings in a range of sizes. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Includes	Specs. Met		Each
Phosphate-Coated Carbon Steel



	240	For 8 mm to 32 mm ID	DIN 472	98365A260	0000000

Side-Mount External Retaining Rings Assortment

Stock up on these rings for when access to the ends of shafts is limited. Push them into grooves with a side-mount retaining ring tool.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Includes	Side-Mount Retaining Ring Style	Specs. Met		Each
Phosphate-Coated Carbon Steel



	300	For 3 mm to 20 mm OD	E	DIN 6799	98554A660	000000