Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it.

A magnet holds the door open; pull on the door to release.

For use with doors that already have a closer, these holders keep doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door.

Push your door open to automatically engage the holder; pull on the door to release.

A magnet holds the door open; pull on the door to release.

Hold doors open within the 85° to 110° range without adding clutter to your floor or walls.

Slide these wedges under the door to hold it open.

Place one of these wire springs onto your door's hinge pin to keep it open.

A built-in stop prevents doors from opening too far—good when wall- or floor-stops can’t be used. Designed for frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern.

To protect doors and walls, these closers have a shock-absorbing stop to damp the force of doors when they’re pushed open. Designed for frequently used doors, these last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern.

Save time and money by replacing worn or damaged arms instead of the entire closer.

When replacing door closers, these mounting plates let you match new closers to your existing hole patterns from most Corbin Russwin, Dorma, LCN, Norton, and Yale closers.

Make existing door closers with lost or damaged covers look new again.

Stop unauthorized personnel from opening doors in your facility—these barricades help you meet lockdown regulations and advisory protocols.

Hardwire these switches to automatic door openers, electromagnetic locks, and electric strikes and your door will open at the touch of a button or the wave of your hand.

Mounted diagonally so one end is higher than the other, the motion of an opening door tightens the torsion spring; as it unwinds, it closes the door.

A hydraulic mechanism makes these the smoothest and quietest closers we offer for storm doors.

Use these closers when your door-to-door clearance is limited. They close storm doors more smoothly than standard spring closers.

With a hydraulic mechanism, these are the smoothest and quietest closers we offer for gates.

Wire these receivers directly to your automatic overhead door openers for their power supply.

Conveniently carry your transmitter with your keys to remotely operate automatic overhead door openers.

Replace existing transmitters or team a transmitter and a receiver to remotely operate your automatic overhead door openers.

Keep environments free of contaminants—with plastic bushings, there's no metal-to-metal contact that can release particles as these supports open and close. Manually control these free-moving lid supports through their full range of motion. Raise the lid until the hold-open mechanism on the support is engaged; slightly lift it again to release the hold and close the lid.

Also known as hatch springs, these supports are commonly used on hatches and other top-opening lids. Raise the lid to extend the spring, which props the lid open—an internal cable keeps the spring from overextending. Press the center of the spring to release the hold and close the lid.

Providing constant resistance through the full range of motion, these supports hold lids open at any angle up to 70° or 90°.

No separate hinges are required, these supports act as a hinge and lid support all in one. Springs provide lifting assistance to raise and hold lids open—slightly lift the lid to get it started and the support will do the rest. Manually shut the lids and the supports will hold them in the closed position.

Gradually slow your lid's motion to prevent it from slamming open. To open lids, lower them and the support will slowly and softly do the rest. Manually shut the lids and the supports will hold them in the closed position.

Install these balancers on a vertical frame to suspend, lift, or lower objects that move vertically in a track such as windows, doors, and panels.

Save time and money by replacing worn or damaged handles instead of the entire opener.

These gas springs have threaded ends so you can use them with any combination of end fittings, studs, and mounting brackets.

These general purpose gas springs assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car.

Mechanical operation means these springs have no seals to fail or gas to leak.

Small in size, but not in strength, these gas springs are often used to replace coil springs in metal stamping and die-spring applications.

Color coded by force to help you choose the correct replacement, these gas springs generate high force in small spaces.

Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

Release gas from these springs until they supply the exact force you need—made of corrosion-resistant 316 stainless steel, they’re commonly used in wet environments.

Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

These brackets secure eyelet end fittings from both sides to provide a strong hold on gas springs that get bumped or jostled. Mount on any panel, lid, or door.

Attach eyelet end fittings to these brackets to mount gas springs.

Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

Made from stainless steel for excellent corrosion resistance in damp environments.

Suitable for use near sensitive electronic applications, these ball stud mounting brackets are aluminum, which is nonmagnetic.

Pair these 90° angle offset-arm brackets with ball socket end fittings to mount your gas spring in almost any position.

Suitable for use near sensitive electronic applications, these ball stud mounting brackets are aluminum, which is nonmagnetic.

Made from stainless steel for excellent corrosion resistance in damp environments.

Designed to mount at the point of contact between a door handle and the wall, these stops prevent handles from damaging walls when doors swing open.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

Install these stops in wood or concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Keep sliding doors and panels from damaging walls and door frames.

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Protect large swinging doors where carts and vehicles are used to push the door open. These polyethylene plastic bumpers are commonly used on two-way swinging doors.