McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    32 Products

    Roller Tracks for Doors

    Image of System. Front orientation. Contains Annotated. Door Tracks and Fittings. Roller Tracks for Doors.
    Combine tracks, mounting brackets, hangers, and end stops to create a system for hanging doors.
    Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
    Ceiling-Mount Brackets with Debris Cap
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Brackets, Ceiling Mount, Caps, Support Brackets.

    Support Brackets

    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Brackets, Ceiling Mount, Caps, Suspended-Support Brackets.

    Suspended-Support Brackets

    Brackets with a debris cap keep dirt and debris out of tracks and rollers. They will not prevent the hanger from rolling off tracks.
    Ceiling-mount brackets wrap around the outside of tracks and mount to the ceiling to act as supports and joints. Bolt them to joists or hang them from threaded rod. Brackets are required every 2 ft. of track.
    Support Brackets—Support brackets mount the tracks in the desired location.
    Suspended-Support Brackets—Suspended-support brackets provide clearance between your tracks and ceiling. The two mounting holes also provide more track stability than standard ceiling mount brackets.
    Powder-Coated Steel—Powder-coated steel components are durable, so they resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    304 Stainless Steel—304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Ht.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Support Brackets
     
    Powder-Coated Steel
    4001 3/4"3 3/16"BeigeNo7/16"1207A18000000
    6002 1/4"4 9/16"BeigeNo9/16"1207A6200000
    8002 5/8"4 3/4"BeigeNo9/16"1207A9300000
    5,0002 13/16"6"BeigeNo13/16"1207A12200000
     
    Galvanized Steel
    4001 3/4"3 3/16"No7/16"1207A3500000
    6002 1/4"4 9/16"No9/16"1207A4800000
    1,0002 5/8"5"No11/16"1207A2300000
     
    304 Stainless Steel
    4001 3/4"3 3/16"No7/16"1089A4300000
    6002 1/4"4 9/16"No9/16"1089A4600000
     
    Suspended-Support Brackets
     
    Powder-Coated Steel
    4001 3/4"4 1/4"BeigeNo7/16"1207A1400000
     
    Galvanized Steel
    4001 3/4"4 1/4"No7/16"1207A2800000
     
    Wall-Mount Brackets with Debris Cap
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Brackets, Wall Mount, Caps, Support Brackets.

    Support Brackets

    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Brackets, Wall Mount, Caps, Double-Track-Support Brackets.

    Double-Track-Support

    Brackets

    Brackets with a debris cap keep dirt and debris out of tracks and rollers. They will not prevent the hanger from rolling off tracks.
    Wall-mount brackets wrap around the outside of tracks and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
    Support Brackets—Support brackets mount the tracks in the desired location.
    Double-Track-Support Brackets—Double-track support brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
    Powder-Coated Steel—Powder-coated steel components are durable, so they resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    304 Stainless Steel—304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Ht.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Support Brackets
     
    Powder-Coated Steel
    4001 3/4"4 11/16"BeigeNo7/16"1207A52000000
    6002 1/4"7 1/16"BeigeNo9/16"1207A5800000
    8002 5/8"7 3/16"BeigeNo9/16"1207A5500000
    1,0002 5/8"7 5/16"BeigeNo11/16"1207A6500000
    5,0002 13/16"8 3/16"BeigeNo13/16"1207A95000000
     
    Galvanized Steel
    4001 3/4"4 11/16"No7/16"1207A7200000
    6002 1/4"7 1/16"No9/16"1207A8800000
     
    304 Stainless Steel
    4001 3/4"4 11/16"No7/16"1089A2200000
    6002 1/4"7 1/16"No9/16"1089A25000000
     
    Double-Track-Support Brackets
     
    Powder-Coated Steel
    4001 3/4"8"BeigeNo7/16"1207A13200000
     
    Galvanized Steel
    4001 3/4"8"No7/16"1207A13500000
     
    Debris Caps
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Caps, Wall Mount.
    Debris caps can also be attached to prevent dust and debris from getting inside the track (these should not be used as end stops).
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    304 Stainless Steel—304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Ht.
    Mounting Fasteners
    Included
    Each
     
    Galvanized Steel
    4001 3/4"2 1/4"No1207A64800000
    6002 1/4"3 1/4"No1207A64900000
    8002 5/8"3 1/4"No1207A65100000
    1,0002 5/8"3 1/4"No1207A65200000
    5,0002 13/16"4"No1207A65300000
     
    304 Stainless Steel
    6001 3/4"2 1/4"No1207A65400000
    6002 1/4"3 1/4"No1207A65500000
     

    Dust-Resistant Roller Tracks for Doors

    Image of ProductInUse. Front orientation. Door Tracks and Fittings. Dust-Resistant Roller Tracks for Doors.
    Round tracks reduce edges where dust and debris can accumulate. Combine tracks, hangers, and accessories to create a system for hanging doors.
    Door stops (sold separately) mount to the floor to keep sliding doors and panels from damaging walls and door frames.
    Debris Caps
    Image of Product. Front orientation. Door Tracks and Fittings. Dust-Resistant Roller Tracks for Doors, Caps.
    Debris caps keep dirt and debris out of tracks and rollers. They won’t prevent hangers from rolling off the track.
    Material
    Mounting Fasteners
    Included
    Pair
    Galvanized SteelYes1054A2300000
     

    Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains

    Image of ProductInUse. Curtain Not Included. Front orientation. Door Tracks and Fittings. Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains.

    Curtain Not Included

    Build your own system for hanging doors and curtains in marine environments. Tracks are anodized aluminum, and hangers are 316 stainless steel for corrosion resistance. Combine tracks, hangers, joints, and accessories for a complete system.
    Debris Caps
    Image of Product. Front orientation. Door Tracks and Fittings. Corrosion-Resistant I-Beam Roller Tracks for Doors and Curtains, Caps.
    Debris caps keep dirt and debris out of the track and roller. They won’t prevent hangers from rolling off the track.
    Material
    Color
    Mounting Fasteners
    Included
    No. of Mounting
    Holes
    Mounting
    Hole Dia.
    Each
    For 550 lb. Track Capacity
    NylonBlackNo13/16"9484T10400000
     
    For 1,400 lb. Track Capacity
    NylonBlackNo11/4"9484T10500000
     
    back to top