Filter by
Application
Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Dual-Connect Shackles
 |
Cotter Pin Style A |
 |
Cotter Pin Style B |
Top Opening | Bottom Opening | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Opening Wd. | Pin Dia. | Inside Lg. | Opening Wd. | Pin Dia. | Inside Lg, | Wt. Cap., lb. | Each | |||
Cotter Pin | |||||||||||
Painted Steel | |||||||||||
| A | 3/4" | 1/2" | 3/4" | 1/2" | 5/16" | 3/8" | 2,600 | 3562T21 | 000000 | ||
| A | 1" | 5/8" | 1" | 9/16" | 7/16" | 15/32" | 5,400 | 3562T23 | 00000 | ||
| A | 1 1/4" | 3/4" | 1 1/4" | 13/16" | 5/8" | 11/16" | 9,200 | 3562T25 | 00000 | ||
Zinc-Plated Steel | |||||||||||
| B | 15/32" | 3/8" | 7/16" | 15/32" | 3/8" | 7/16" | 4,700 | 3562T31 | 00000 | ||
| B | 17/32" | 15/32" | 15/32" | 17/32" | 15/32" | 15/32" | 6,600 | 3562T32 | 00000 | ||
| B | 21/32" | 9/16" | 5/8" | 21/32" | 9/16" | 5/8" | 11,200 | 3562T33 | 00000 | ||
Dual-Connect Shackles for Lifting
 |
Flush Hammer-Set-Dowel Pin |
 |
Flush Hammer-Set-Dowel Pin/Safety Cotter Pin |
Attach chain to pins on both ends of these shackles—no extra hardware needed. Connect them to two lengths of chain or use them as a stable, inline connection in a lifting system. All meet ASME specifications for use with rigging and lifting equipment.
Note: Capacity limits are based on loads applied in line with a straight length of rope or chain. Test all assemblies for required strength before use.
Hammer-Set-Dowel Pin—Hammer in dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.
Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, they won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
High-Strength Powder-Coated Alloy Steel—The powder-coating won't chip off as easily as paint. These shackles combine the strength of alloy steel with corrosion resistance in wet and outdoor environments.
Top Opening | Bottom Opening | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Opening Wd. | Pin Dia. | Inside Lg. | Opening Wd. | Pin Dia. | Inside Lg, | Wt. Cap., lb. | Specs. Met | Each | |||
Flush Hammer-Set-Dowel Pin | |||||||||||
High-Strength Powder-Coated Alloy Steel | |||||||||||
| 27/32" | 5/8" | 1 15/32" | 15/32" | 15/32" | 15/32" | 7,100 | ASME B30.26 | 3532T11 | 0000000 | ||
| 1 1/16" | 25/32" | 1 15/16" | 9/16" | 5/8" | 19/32" | 12,000 | ASME B30.26 | 3532T12 | 000000 | ||
| 1 11/32" | 15/16" | 2 1/4" | 11/16" | 3/4" | 25/32" | 18,100 | ASME B30.26 | 3532T13 | 000000 | ||
Flush Hammer-Set-Dowel Pin/Safety Cotter Pin | |||||||||||
High-Strength Powder-Coated Alloy Steel | |||||||||||
| 13/16" | 1 3/32" | 1 15/32" | 15/32" | 15/32" | 15/32" | 7,100 | ASME B30.26 | 3532T26 | 000000 | ||
| 1 1/16" | 1 1/4" | 1 15/16" | 9/16" | 5/8" | 19/32" | 12,000 | ASME B30.26 | 3532T27 | 000000 | ||
| 1 11/32" | 1 13/32" | 2 1/4" | 11/16" | 3/4" | 25/32" | 18,100 | ASME B30.26 | 3532T28 | 000000 | ||
