Control flow in two directions from a single source—these valves have two handles for independent operation of each outlet. They can direct flow from the center-port inlet to one side-port outlet at full capacity, direct flow to both side-port outlets simultaneously at reduced capacity, or shut off flow to both outlet ports completely. Valves are standard port, so they slightly restrict flow.

Convert one faucet into two, four, or five outlets.

All valves have shut-off outlets, so you can start and stop the flow to outlets individually. You can also use the shut-off to release pressure or drain residual water after disconnecting hose. Some valves also have open-flow outlets in addition to shut-off outlets. Open-flow outlets don't give you any flow control—they work like standard outlets.

Plastic valves are lighter in weight than metal valves, but they’re not as durable. Zinc valves are stronger and more resistant to wear and tear than plastic valves. Brass valves are stronger than plastic, zinc, and aluminum valves. Aluminum valves resist the highest pressures.

Contoured lever handles give you a better grip—choose them if you’ll be wearing gloves often or if they’re in an area where they’ll get wet and slippery. Toggle-switch handles easily flick on and off like a light switch.

Valves with TPR coating protect your hands by keeping the valve’s surface from getting too hot or cold.

Valves with a support brace can be secured against a wall for extra stability.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.