About Grease
More
About Lubricants
More
Electric Motor Bearing Grease
Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is more economical than synthetic-oil-based grease. Grease with polyurea thickener has excellent heat resistance and good moisture and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade  | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote G-0010 Multi-Purpose—Polyurea Thickener | ||||||||
| 2 | Mineral | 14.1 | Grease Gun Cartridge | -20° to 340° | 525° | Green | 000000 | 000000 |
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote G-0010 Multi-Purpose—Polyurea Thickener | |||||||||
| 2 | Mineral | 14.1 | Grease Gun Cartridge | -20° to 340° | 525° | Green | 10 | 000000 | 0000000 |
Moisture-Resistant Bearing Grease
Made with moisture-resistant thickeners, this grease stays in place in wet environments. It is wear resistant for use in a wide range of bearings.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Grease with polyurea thickener has excellent heat resistance and good oxidation resistance. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Polyurea Thickener | ||||||||||
| 2 | Mineral | PTFE | 0.75 fl. oz. | __ | Tube | -35° to 455° | 500° | Green | 0000000 | 00000 |
| 2 | Mineral | PTFE | 14.5 fl. oz. | __ | Grease Gun Cartridge | -35° to 455° | 500° | Green | 0000000 | 00000 |
| 2 | Mineral | PTFE | __ | 1 lbs. | Can | -35° to 455° | 500° | Green | 0000000 | 00000 |
| 2 | Mineral | PTFE | 1 gal. | __ | Pail | -35° to 455° | 500° | Green | 0000000 | 00000 |
| 2 | Mineral | PTFE | 5 gal. | __ | Pail | -35° to 455° | 500° | Green | 0000000 | 000000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
Polyurea Thickener | |||||||||||
| 2 | Mineral | PTFE | 0.75 fl. oz. | __ | Tube | -35° to 455° | 500° | Green | 24 | 00000000 | 0000000 |
| 2 | Mineral | PTFE | 14.5 fl. oz. | __ | Grease Gun Cartridge | -35° to 455° | 500° | Green | 16 | 00000000 | 000000 |
| 2 | Mineral | PTFE | __ | 1 lbs. | Can | -35° to 455° | 500° | Green | 6 | 00000000 | 000000 |
| 2 | Mineral | PTFE | 1 gal. | __ | Pail | -35° to 455° | 500° | Green | 6 | 00000000 | 000000 |