McMaster-Carr logo
    Filter by
    Material
    System of Measurement
    End Shape
    Pin Type
    Fastener Head Type
    End Type
    Shaft Type
    Breaking Strength
    Minimum Hardness
    Tolerance Rating
    Overall Length
    Point Diameter
    Body Shape
    Body Texture
    Number of Pieces
    Container Type
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    34 Products

    Dowel Pins
    3D CAD models available

    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Brass
    Image of Product. Front orientation. Dowel Pins. Dowel Pins.
    360 Brass—With a warm, polished look, these pins are typically chosen for their appearance. Brass is softer than other metals, so pins may bend or break under high stress.
    Lg.
    Dia.
    Tolerance
    Min.
    Hardness
    Breaking
    Strength
    Pkg.
    Qty.
    Pkg.
    360 Brass
     
    1/16" Diameter
    1/4"0" to 0.0002"Not RatedNot Rated2500000000000000
    3/8"0" to 0.0002"Not RatedNot Rated2500000000000000
    1/2"0" to 0.0002"Not RatedNot Rated2500000000000000
     
    3/32" Diameter
    1/4"0" to 0.0002"Not RatedNot Rated2500000000000000
    3/8"0" to 0.0002"Not RatedNot Rated2500000000000000
    1/2"0" to 0.0002"Not RatedNot Rated2500000000000000
     
    1/8" Diameter
    3/8"0" to 0.0002"Not RatedNot Rated2500000000000000
    1/2"0" to 0.0002"Not RatedNot Rated2500000000000000
    5/8"0" to 0.0002"Not RatedNot Rated100000000000000
    3/4"0" to 0.0002"Not RatedNot Rated100000000000000
     
    3/16" Diameter
    1/2"0" to 0.0002"Not RatedNot Rated100000000000000
    5/8"0" to 0.0002"Not RatedNot Rated1000000000000000
    3/4"0" to 0.0002"Not RatedNot Rated1000000000000000
     
    1/4" Diameter
    1/2"0" to 0.0002"Not RatedNot Rated1000000000000000
    5/8"0" to 0.0002"Not RatedNot Rated1000000000000000
    3/4"0" to 0.0002"Not RatedNot Rated1000000000000000
    1"0" to 0.0002"Not RatedNot Rated1000000000000000
     
    5/16" Diameter
    3/4"0" to 0.0002"Not RatedNot Rated500000000000000
    1"0" to 0.0002"Not RatedNot Rated500000000000000
    1 1/4"0" to 0.0002"Not RatedNot Rated10000000000000
    1 1/2"0" to 0.0002"Not RatedNot Rated10000000000000
     
    3/8" Diameter
    3/4"0" to 0.0002"Not RatedNot Rated10000000000000
    1"0" to 0.0002"Not RatedNot Rated10000000000000
    1 1/4"0" to 0.0002"Not RatedNot Rated10000000000000
    1 1/2"0" to 0.0002"Not RatedNot Rated10000000000000
     

    Nonmarring Alignment Pins
    3D CAD models available

    Image of Product. Front orientation. Alignment Pins. Nonmarring Alignment Pins.
    These brass tools reduce marring on metal surfaces because they're softer than steel punches. Use them to align holes in sheet metal for rivets and bolts.
    Body
    Point
    Dia.
    Dia.
    Overall
    Lg.
    Shape
    Texture
    Each
    Brass
    1/4"1/4"4"RoundKnurled000000000000
    3/8"3/8"6"RoundKnurled000000000000
    1/2"1/2"7"RoundKnurled000000000000
    5/8"5/8"8"RoundKnurled000000000000
    3/4"3/4"8"RoundKnurled000000000000
     

    Nonmarring Alignment Pin Sets

    Image of Product. 3 Pieces with Pouch. Front orientation. Alignment Pins. Nonmarring Alignment Pin Sets, 3 Pieces, Pouch.
    Image of Product. 3 Pieces. Front orientation. Alignment Pins. Nonmarring Alignment Pin Sets, 3 Pieces, Tray.
    Image of Product. Front orientation. Alignment Pins. Nonmarring Alignment Pin Sets, 4 Pieces.
    Image of Product. 5 Pieces with Pouch. Front orientation. Alignment Pins. Nonmarring Alignment Pin Sets, 5 Pieces, Pouch.

    3 Pieces

    with Pouch

    3 Pieces

    4 Pieces

    5 Pieces with Pouch

    These brass tools reduce marring on metal surfaces because they're softer than steel punches. Use them to align holes in sheet metal for rivets and bolts.
    Body
    No. of
    Pieces
    Includes
    Shape
    Texture
    Container
    Type
    Each
    Brass
    33/8" Point Dia. Pin, 6" Taper Lg. (10" O'all Lg.)
    7/16" Point Dia. Pin, 8" Taper Lg. (14" O'all Lg.)
    3/4" Point Dia. Pin (12" O'all Lg.)
    RoundKnurledPouch000000000000000
    33/8" Point Dia. Pin (6" O'all Lg.)
    1/2" Point Dia. Pin (7" O'all Lg.)
    3/4" Point Dia. Pin (8" O'all Lg.)
    RoundKnurledTray0000000000000
    41/4" Point Dia. Pin, 2" Taper Lg. (6" O'all Lg.)
    3/16" Point Dia. Pin, 1-1/4" Taper Lg. (4" O'all Lg.)
    3/8" Point Dia. Pin, 2-3/8" Taper Lg. (6" O'all Lg.)
    5/16" Point Dia. Pin, 1-1/4" Taper Lg. (4" O'all Lg.)
    RoundKnurled__0000000000000
    51/4" Point Dia. Pin (4" O'all Lg.)
    3/8" Point Dia. Pin (6" O'all Lg.)
    1/2" Point Dia. Pin (7" O'all Lg.)
    5/8" Point Dia. Pin (8" O'all Lg.)
    3/4" Point Dia. Pin (8" O'all Lg.)
    RoundKnurledPouch0000000000000
     
    back to top