McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Type
    Pin Type
    End Shape
    End Type
    Fastener Head Type
    USMCA Qualifying
    Number of Pieces
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    1,284 Products

    Slotted Spring Pins

    Image of Product. Front orientation. Spring Pins. Slotted Spring Pins.
    Image of Product. End View. Side1 orientation. Spring Pins. Slotted Spring Pins.

    End View

    Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.
    Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.
    Zinc-Plated Spring Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Black-Phosphate-Coated Spring Steel—The dark coating creates both a finished appearance and a barrier against rust that's more durable than clear zinc plating. Stronger than stainless steel, these pins won't deform from stress and vibration.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these pins won't degrade when exposed to harsh weather, salt water, and most chemicals. They're strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Wear-Resistant 400 Series Stainless Steel—Our most wear-resistant stainless steel pins, these are good for pivoting parts that create a lot of friction. They hold up in environments that experience occasional moisture, but they're not as corrosion resistant as 18-8 and 316 stainless steel.
    Lg.
    For Hole Dia.
    Wall
    Thk.
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Mil. Spec.
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    1/16" Diameter
    3/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.2500000000000000000
    1/4"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.250000000000000000
    5/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.250000000000000000
    3/8"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.250000000000000000
    7/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.250000000000000000
    1/2"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.225000000000000000
    9/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.225000000000000000
    5/8"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.225000000000000000
    11/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.225000000000000000
    3/4"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.225000000000000000
    13/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.210000000000000000
    7/8"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.21000000000000000
    15/16"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.21000000000000000
    1"0.062" to 0.065"0.012"430Rockwell C43ASME B18.8.21000000000000000
     
    5/64" Diameter
    3/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    1/4"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    5/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    3/8"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.22500000000000000
    7/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    1/2"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    9/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    5/8"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    11/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    3/4"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    13/16"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    7/8"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    1"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    1 1/4"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
    1 1/2"0.078" to 0.081"0.018"800Rockwell C43ASME B18.8.225000000000000000
     
    3/32" Diameter
    3/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1/4"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    5/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    3/8"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    7/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    1/2"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    9/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    5/8"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.250000000000000000
    11/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    3/4"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    13/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    7/8"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    15/16"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1 1/8"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1 1/4"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1 3/8"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
    1 1/2"0.094" to 0.097"0.022"1,100Rockwell C43ASME B18.8.225000000000000000
     
    1/8" Diameter
    1/4"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    5/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.250000000000000000
    3/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.250000000000000000
    7/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.250000000000000000
    1/2"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.250000000000000000
    9/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    5/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    11/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    3/4"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    13/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    7/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    15/16"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.210000000000000000
    1"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    1 1/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    1 1/4"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    1 3/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.225000000000000000
    1 1/2"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.21000000000000000
    1 5/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.21000000000000000
    1 3/4"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.21000000000000000
    1 7/8"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.210000000000000000
    2"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.21000000000000000
    2 1/4"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.2250000000000000
    2 1/2"0.125" to 0.129"0.028"1,800Rockwell C43ASME B18.8.210000000000000000
     
    5/32" Diameter
    3/8"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    7/16"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    1/2"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    9/16"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    5/8"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    3/4"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    7/8"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    1"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.21000000000000000
    1 1/8"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    1 1/4"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    1 3/8"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    1 1/2"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    1 3/4"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    2"0.156" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
    2 1/2"0.157" to 0.16"0.032"2,700Rockwell C43ASME B18.8.210000000000000000
     
    3/16" Diameter
    3/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    7/16"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    1/2"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    9/16"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    5/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    11/16"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    3/4"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    13/16"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    7/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    1"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.225000000000000000
    1 1/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    1 1/4"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    1 3/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    1 1/2"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    1 5/8"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    1 3/4"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    2"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    2 1/4"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    2 1/2"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.210000000000000000
    2 3/4"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.25000000000000000
    3"0.187" to 0.192"0.04"4,100Rockwell C43ASME B18.8.25000000000000000
     
    7/32" Diameter
    1/2"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    5/8"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    3/4"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    1"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    1 1/4"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    1 1/2"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    1 3/4"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.25000000000000000
    2"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.210000000000000000
    2 1/4"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.25000000000000000
    2 1/2"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.25000000000000000
    2 3/4"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.25000000000000000
    3"0.219" to 0.224"0.048"5,800Rockwell C43ASME B18.8.25000000000000000
     
    1/4" Diameter
    1/2"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    9/16"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    5/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    11/16"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    3/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    7/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1 1/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1 1/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1 3/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1 1/2"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.210000000000000000
    1 5/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    1 3/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    1 7/8"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    2"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    2 1/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    2 1/2"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    2 3/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    3"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    3 1/4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    3 1/2"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.25000000000000000
    4"0.25" to 0.256"0.048"7,000Rockwell C43ASME B18.8.250000000000000
     
    5/16" Diameter
    3/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    1"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    1 1/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    1 1/2"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    1 3/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    2"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    2 1/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    2 1/2"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.25000000000000000
    2 3/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
    3"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
    3 1/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
    3 1/2"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
    3 3/4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
    4"0.312" to 0.318"0.062"10,800Rockwell C43ASME B18.8.22500000000000000
     
    3/8" Diameter
    3/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.2250000000000000
    1"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    1 1/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    1 1/2"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    1 3/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    2"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    2 1/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    2 1/2"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    2 3/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.21000000000000000
    3"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.21000000000000000
    3 1/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.22500000000000000
    3 1/2"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.21000000000000000
    3 3/4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.21000000000000000
    4"0.375" to 0.382"0.077"16,300Rockwell C43ASME B18.8.21000000000000000
     
    7/16" Diameter
    1 3/4"0.437" to 0.445"0.077"19,800Rockwell C43ASME B18.8.21000000000000000
    2"0.437" to 0.445"0.077"19,800Rockwell C43ASME B18.8.21000000000000000
    2 1/2"0.437" to 0.445"0.077"19,800Rockwell C43ASME B18.8.21000000000000000
    3"0.437" to 0.445"0.077"19,800Rockwell C43ASME B18.8.21000000000000000
    4"0.437" to 0.445"0.077"19,800Rockwell C43ASME B18.8.21000000000000000
     
    1/2" Diameter
    1 1/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.22500000000000000
    1 1/2"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    1 3/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    2"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    2 1/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    2 1/2"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    2 3/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    3"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    3 1/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    3 1/2"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    3 3/4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
    4"0.5" to 0.51"0.094"27,000Rockwell C43ASME B18.8.21000000000000000
     
    5/8" Diameter
    3"0.625" to 0.636"1/8"46,000Rockwell C43ASME B18.8.2100000000000000
    4"0.625" to 0.636"1/8"46,000Rockwell C43ASME B18.8.2100000000000000
     
    1 mm Diameter
    4 mm1 mm0.2 mm150Rockwell C42DIN 1481, ISO 87521000000000000000
    6 mm1 mm0.2 mm150Rockwell C42ISO 87521000000000000000
    8 mm1 mm0.2 mm150Rockwell C42ISO 87521000000000000000
     
    1.5 mm Diameter
    4 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42DIN 1481, ISO 87521000000000000000
    5 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42DIN 1481, ISO 87521000000000000000
    6 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42DIN 1481, ISO 87521000000000000000
    8 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42DIN 1481, ISO 875210000000000000000
    10 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42ISO 875210000000000000000
    12 mm1.5 mm to 1.6 mm0.3 mm350Rockwell C42DIN 1481, ISO 875210000000000000000
     
    2 mm Diameter
    4 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 133375000000000000000
    4 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 87522000000000000000
    5 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 133375000000000000000
    5 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    6 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    6 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    8 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    8 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    10 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    10 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    12 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    12 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    14 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 133371000000000000000
    14 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    16 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    16 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    18 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    18 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875220000000000000000
    20 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 133371000000000000000
    20 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875210000000000000000
    22 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 13337500000000000000
    22 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 87521000000000000000
    24 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    24 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875210000000000000000
    30 mm2 mm0.2 mm330Rockwell C42DIN 7346, ISO 1333710000000000000000
    30 mm2 mm to 2.1 mm0.4 mm600Rockwell C42ISO 875210000000000000000
     
    2.5 mm Diameter
    5 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 13337500000000000000
    6 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 1333710000000000000000
    8 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 1333710000000000000000
    10 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 1333710000000000000000
    10 mm2.5 mm to 2.6 mm0.5 mm950Rockwell C42DIN 1481, ISO 87521000000000000000
    12 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 1333710000000000000000
    14 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 13337500000000000000
    14 mm2.5 mm to 2.6 mm0.5 mm950Rockwell C42ISO 87521000000000000000
    16 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 133375000000000000000
    18 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 133375000000000000000
    20 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 13337500000000000000
    20 mm2.5 mm to 2.6 mm0.5 mm950Rockwell C42ISO 875210000000000000000
    24 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 13337500000000000000
    24 mm2.5 mm to 2.6 mm0.5 mm950Rockwell C42ISO 87521000000000000000
    26 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm2.5 mm0.25 mm530Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm2.5 mm to 2.6 mm0.5 mm950Rockwell C42ISO 875210000000000000000
     
    3 mm Diameter
    4 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    4 mm3 mm to 3.65 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    5 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 13337500000000000000
    6 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133371000000000000000
    6 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    8 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    8 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    10 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    10 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    12 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    12 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    14 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    14 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    16 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    16 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    18 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 1333710000000000000000
    18 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    20 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875220000000000000000
    22 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    22 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 87521000000000000000
    24 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 13337500000000000000
    24 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 87521000000000000000
    26 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    26 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 87521000000000000000
    28 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    28 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 87521000000000000000
    30 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875210000000000000000
    32 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 13337500000000000000
    36 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    36 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42DIN 1481, ISO 875210000000000000000
    40 mm3 mm0.3 mm780Rockwell C42DIN 7346, ISO 133375000000000000000
    40 mm3 mm to 3.1 mm0.6 mm1,400Rockwell C42ISO 875210000000000000000
     
    3.5 mm Diameter
    10 mm3.5 mm to 3.65 mm0.8 mm2,000Rockwell C42ISO 87521000000000000000
    20 mm3.5 mm to 3.65 mm0.8 mm2,000Rockwell C42ISO 87521000000000000000
    30 mm3.5 mm to 3.65 mm0.8 mm2,000Rockwell C42ISO 875210000000000000000
     
    4 mm Diameter
    6 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 1333710000000000000000
    6 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    8 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    8 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    10 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    10 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    12 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    12 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    14 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    14 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    16 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    16 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87521000000000000000
    18 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    18 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    20 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337500000000000000
    20 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    22 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    22 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    24 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    24 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    26 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    26 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    28 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    32 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133375000000000000000
    32 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    36 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133372500000000000000
    36 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    40 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337250000000000000
    40 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    45 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 13337250000000000000
    45 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 875210000000000000000
    50 mm4 mm0.5 mm1,700Rockwell C42DIN 7346, ISO 133372500000000000000
    50 mm4 mm to 4.2 mm0.8 mm2,500Rockwell C42ISO 87525000000000000000
     
    5 mm Diameter
    5 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    6 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    8 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337500000000000000
    10 mm5 mm to 5.2 mm1 mm3,900Rockwell C42DIN 1481, ISO 875210000000000000000
    12 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337250000000000000
    12 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    14 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    14 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    16 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    16 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    18 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    18 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    20 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    20 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    22 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    22 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    24 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    24 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    26 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    26 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    28 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    28 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    30 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133375000000000000000
    30 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    32 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337250000000000000
    32 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    36 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337250000000000000
    36 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    40 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337250000000000000
    40 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    45 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337250000000000000
    45 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 875210000000000000000
    50 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133372500000000000000
    50 mm5 mm to 5.2 mm1 mm3,900Rockwell C42ISO 87525000000000000000
    60 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 133372500000000000000
    70 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337100000000000000
    80 mm5 mm0.5 mm2,300Rockwell C42DIN 7346, ISO 13337100000000000000
     
    6 mm Diameter
    10 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337250000000000000
    12 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133375000000000000000
    12 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    14 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133375000000000000000
    14 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    16 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133375000000000000000
    16 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    18 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133375000000000000000
    20 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337250000000000000
    20 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    22 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337250000000000000
    24 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    24 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    26 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    26 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 875210000000000000000
    28 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    30 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    30 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 87525000000000000000
    32 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    36 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    36 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 87525000000000000000
    40 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133372500000000000000
    40 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 87525000000000000000
    45 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337100000000000000
    45 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 87525000000000000000
    50 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337100000000000000
    50 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 87525000000000000000
    55 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337100000000000000
    60 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337100000000000000
    60 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42ISO 8752250000000000000
    70 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133371000000000000000
    80 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 13337100000000000000
    100 mm6 mm0.75 mm4,000Rockwell C42DIN 7346, ISO 133371000000000000000
    100 mm6 mm to 6.2 mm1.2 mm5,800Rockwell C42DIN 1481, ISO 87521000000000000000
     
    8 mm Diameter
    10 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    12 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    14 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    16 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    18 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    20 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    22 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    22 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87525000000000000000
    24 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    26 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    26 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87525000000000000000
    28 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133372500000000000000
    30 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    30 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87525000000000000000
    32 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    36 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    40 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    40 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87525000000000000000
    45 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    50 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    50 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87522500000000000000
    55 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    55 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87522500000000000000
    60 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    60 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42ISO 87522500000000000000
    65 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 1333750000000000000
    70 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    80 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    100 mm8 mm0.75 mm5,300Rockwell C42DIN 7346, ISO 13337500000000000000
    100 mm8 mm to 8.25 mm1.5 mm9,600Rockwell C42DIN 1481, ISO 875250000000000000
     
    10 mm Diameter
    10 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    12 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    14 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    16 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    20 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    22 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    24 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    24 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87522500000000000000
    26 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    30 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337100000000000000
    30 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87522500000000000000
    36 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    36 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87522500000000000000
    40 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    40 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87522500000000000000
    45 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 133371000000000000000
    50 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 1333750000000000000
    50 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87522500000000000000
    60 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 1333750000000000000
    60 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87521000000000000000
    70 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 1333750000000000000
    80 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337500000000000000
    80 mm10 mm to 10.3 mm2 mm15,700Rockwell C42ISO 87521000000000000000
    90 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 13337500000000000000
    100 mm10 mm1 mm5,300Rockwell C42DIN 7346, ISO 1333710000000000000
    100 mm10 mm to 10.3 mm2 mm15,700Rockwell C42DIN 1481, ISO 8752500000000000000
     
    12 mm Diameter
    10 mm12 mm1 mm10,700Rockwell C42DIN 7346, ISO 13337100000000000000
    16 mm12 mm1 mm10,700Rockwell C42DIN 7346, ISO 13337100000000000000
    20 mm12 mm1 mm10,700Rockwell C42DIN 7346, ISO 133371000000000000000
    24 mm12 mm1 mm10,700Rockwell C42DIN 7346, ISO 133371000000000000000
    26 mm12 mm1 mm10,700Rockwell C42DIN 7346, ISO 1333750000000000000
    28 mm12 mm1 mm10,700Rockwell C42