McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    515 Products

    Dowel Pins

    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to join most components but won't withstand stress and vibration as well as steel.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    0.8 mm Diameter
    30.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    40.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    100 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    1 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    120 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    160 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
     
    1.5 mm Diameter
    30.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    40.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    240 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
     
    2 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    280.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    320.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    340.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    360.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    380.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    450.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    2.5 mm Diameter
    40 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    320.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    340.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    360.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    380.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    450.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    500.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    3 mm Diameter
    40 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    280.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    320.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    340.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    360 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    380.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    400.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    450 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    500 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    600 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    800.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    1000.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    4 mm Diameter
    40.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    50.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    60.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    80.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    90.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    120.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    140.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    220.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    240.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    260 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    280.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    300.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    320.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    450 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    500.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    600 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    5 mm Diameter
    50 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    60.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    80.004 to 0.012Not RatedNot RatedISO 2338-m6250000000000000
    90.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    100.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    120.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    140.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    220 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    240.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    260.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    280.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    300 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    320.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    450.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    500.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    600.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    6 mm Diameter
    60 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    80 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    90.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    100.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    140.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    160.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    220.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    240.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    260.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    280.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    300.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    320.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    450.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    500.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    550.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    600.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    700.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    8 mm Diameter
    80.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    100.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    120.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    140.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    160.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    180.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    200.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    220 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    240.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    260.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    280.006 to 0.015Not RatedNot RatedISO 2338-m61000000000000000
    300.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    320.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    340.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    360.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    380.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    400.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    450.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    500.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    550.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    600.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    700.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    800.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    1000.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
     
    10 mm Diameter
    100.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    120 to 0.015Not RatedNot RatedISO 2338-m650000000000000
    140.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    160.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    180.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    200.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    220.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    240.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    260.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    280.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    300.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    320.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    340.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    360.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    380.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    400.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    450.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    500.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    600.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    700.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    800.006 to 0.015Not RatedNot RatedISO 2338-m6100000000000000
    900.006 to 0.015Not RatedNot RatedISO 2338-m6100000000000000
     
    12 mm Diameter
    120.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    140.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    160.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    180.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    220.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    240.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    260.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    280.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    320 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    340.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    360.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    450 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    600.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    700.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    800.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    900.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    14 mm Diameter
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
     
    16 mm Diameter
    200 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    600.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    18 mm Diameter
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    0.8 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
     
    1 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    120 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    1.5 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    200 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    2 mm Diameter
    40 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    50 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    280 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    2.5 mm Diameter
    40 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    50 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    140 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    160 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    180 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    200 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    3 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    50 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    280.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    320 to 0.008Not RatedNot RatedISO 2338-m6100000000000000
    340.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    360 to 0.008Not RatedNot RatedISO 2338-m61000000000000000
    380.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    400.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    500.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    600.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    800.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    1000.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    4 mm Diameter
    50.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    60.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    80.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    120.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    140 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    160.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    220.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    240.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    260.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    280.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    300.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    320.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    500.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    600.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    5 mm Diameter
    50.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    60 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    80.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    100.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    120.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    140.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    160.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    220.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    240.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    260 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    280 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    300.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    320 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    500.004 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    600.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    6 mm Diameter
    60.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    80 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    90.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    100.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    120.004 to 0.012Not RatedNot RatedISO 2338-m6100000000000000
    140.004 to 0.012Not RatedNot RatedISO 2338-m61000000000000000
    160.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    180.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    200.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    220.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    240 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    260.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    280 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    300 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    320 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    340.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    360 to 0.012Not RatedNot RatedISO 2338-m6500000000000000
    380.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    400 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    500 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    600 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    8 mm Diameter
    80.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    100 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    120 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    140 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    160.006 to 0.015Not RatedNot RatedISO 2338-m650000000000000
    180 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    200.006 to 0.015Not RatedNot RatedISO 2338-m6500000000000000
    220.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    240.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    260.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    280 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    300.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    320 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    360.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    380.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    400.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    500.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    600 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    800 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    1000.006 to 0.015Not RatedNot RatedISO 2338-m6100000000000000
     
    10 mm Diameter
    100.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    120.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    140.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    160.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    180.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    200.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    220.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    240.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    260.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    280 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    300.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    320.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    340.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    360.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    380.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    400.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    500.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
    600 to 0.015Not RatedNot RatedISO 2338-m6100000000000000
    800 to 0.015Not RatedNot RatedISO 2338-m6100000000000000
     
    12 mm Diameter
    120.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    160.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    240.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    260.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    280.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    340.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    360.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    380.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    600.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    14 mm Diameter
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    16 mm Diameter
    200.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    18 mm Diameter
    200.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    300.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    400.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
    500.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    Corrosion-Resistant Stainless Steel with Material Certificate
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to join most components but won't withstand stress and vibration as well as steel.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1 mm Diameter
    30.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000000
     
    1.5 mm Diameter
    50.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
     
    2 mm Diameter
    100.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    400.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    500.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    2.5 mm Diameter
    100.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    280.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    400.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    3 mm Diameter
    60.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
     
    4 mm Diameter
    100.004 to 0.012Not RatedNot RatedISO 2338-m65000000000000000
    160.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
     
    5 mm Diameter
    160.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
    1000.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    6 mm Diameter
    120.004 to 0.012Not RatedNot RatedISO 2338-m62500000000000000
     
    12 mm Diameter
    300.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
     
    18 mm Diameter
    500.007 to 0.018Not RatedNot RatedISO 2338-m6100000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    0.8 mm Diameter
    80.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    1 mm Diameter
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    1.5 mm Diameter
    50.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    2 mm Diameter
    60.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    2.5 mm Diameter
    280.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    3 mm Diameter
    60.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    4 mm Diameter
    40.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    70.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    90.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    100.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
    800.004 to 0.012Not RatedNot RatedISO 2338-m610000000000000
     
    5 mm Diameter
    90.004 to 0.012Not RatedNot RatedISO 2338-m650000000000000
     
    8 mm Diameter
    340.006 to 0.015Not RatedNot RatedISO 2338-m610000000000000
     
    12 mm Diameter
    180.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
    320.007 to 0.018Not RatedNot RatedISO 2338-m610000000000000
     

    Dowel Pin Assortments

    Image of Product. Front orientation. Dowel Pins. Sold as Assortments, Plain Head.
    Image of Product. Front orientation. Dowel Pins. Sold as Assortments, Plain Head.
    With a range of sizes, use these assortments to precisely align a variety of machine parts and prevent movement during assembly. These pins can also be used as a pivot, shaft, or hinge to join moving components. Dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. Since they can be hard to remove, they are best for permanent fixtures that don't require frequent adjustments or disassembly.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Sizes Included
    No. of
    Pieces
    Specs. Met
    Container
    Type
    Each
    18-8 Stainless Steel
    3 mm to 6 mm Dia.540ISO 2338-m6Plastic Box0000000000000000
     
    back to top