McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    100 Products

    Floor Drain Cleanouts

    Image of Product. Bottom orientation. Drain Cleanouts. Floor Drain Cleanouts.
    Create an access point to inspect and clean a floor drain pipeline. The cover on these cleanouts can be adjusted up or down to sit flush with the finished floor. An ABS cleanout plug underneath the cover prevents debris from entering and sewer gases from exiting the system. These cleanouts are compatible with Schedule 40 PVC pipe for gravity-flow drain, waste, and vent applications. Attach to your unthreaded drain pipe with a PVC primer and cement (also known as solvent weld).
    Material
    Pipe
    Size
    Dia.
    Ht.
    Wt. Cap.,
    lb.
    Cover
    Body
    Plug
    Each
    Female Cement Socket
    2
    		5 3/16"2 5/8" to 3 1/2"2,000Textured NickelPVC
    		ABS
    		6139N11000000
    3
    		5 3/16"3 7/8" to 4 3/4"2,000Textured NickelPVC
    		ABS
    		6139N1200000
    4
    		5 3/16"4 5/16" to 5 3/16"2,000Textured NickelPVC
    		ABS
    		6139N1300000
     

    Drain Cleanout Hole Covers

    Allow easy access to cleanout plugs hidden behind walls and floors. Covers come with the bolts you need to hold them in place.
    Covers for Wall Cleanouts
    Image of Product. Front orientation. Drain Cleanout Hole Covers. Covers for Wall Cleanouts.
    No. of
    Holes
    Dia.
    Thk.
    Material
    Mounting Fasteners
    Included
    Bolt
    Lg.
    Each
    13"1/32"430 Stainless Steel
    		Yes2 1/2"2043K2100000
    14"1/32"430 Stainless Steel
    		Yes2 1/2"2043K220000
    14"1 1/4"PolystyreneYes2"2043K5100000
    15"1/32"430 Stainless Steel
    		Yes2 1/2"2043K230000
    15"1 17/32"PolystyreneYes2"2043K5200000
    16"1/32"430 Stainless Steel
    		Yes2 1/2"2043K2400000
    18"1/32"430 Stainless Steel
    		Yes2 1/2"2043K2500000
    110"1/32"304 Stainless Steel
    		Yes3 1/2"2043K6900000
    Covers for Wall Cleanouts—Includes Polypropylene Plastic Cleanout Plug
    Image of Product. Bottom orientation. Drain Cleanout Hole Covers. Covers for Wall Cleanouts—Includes Polypropylene Plastic Cleanout Plug.
    Covers with a cleanout plug seal your drain cleanout pipe.
    No. of
    Holes
    Dia.
    Thk.
    Material
    Cleanout Plug
    OD/Fitting ID
    Mounting Fasteners
    Included
    Bolt
    Lg.
    Each
    14"1/32"304 Stainless Steel
    		2"Yes2 1/2"2043K66000000
    15"1/32"304 Stainless Steel
    		3"Yes2 1/2"2043K6700000
    16"1/32"304 Stainless Steel
    		4"Yes2 1/2"2043K6800000
    Covers for Floor Cleanouts
    Image of Product. Front orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 1 Hole.
    Image of Product. Bottom orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 2 Holes.
    Image of Product. Bottom orientation. Drain Cleanout Hole Covers. Covers for Floor Cleanouts, 3 Holes.

    1 Hole

    2 Holes

    3 Holes

    No. of
    Holes
    Dia.
    Thk.
    Material
    Wt. Cap.,
    lb.
    Mounting Fasteners
    Included
    Bolt
    Lg.
    Each
    15 1/8"3/16"Nickel2,400Yes1 1/2"2043K420000000
    15 1/8"5/8"Cast Iron7,500Yes2 1/2"2043K5700000
    16 1/8"1/4"Nickel2,400Yes1 1/2"2043K45000000
    16 1/8"5/8"Cast Iron7,500Yes2 1/2"2043K5800000
    17 3/4"1/4"Nickel1,000Yes1 1/2"2043K53000000
    17 3/4"5/8"Cast Iron7,500Yes2 1/2"2043K5900000
    18 3/8"1/4"Nickel2,400Yes1 1/2"2043K46000000
    25 1/8"5/8"Cast Iron7,500Yes1 1/2"2043K6100000
    26 1/8"5/8"Cast Iron7,500Yes1 1/2"2043K6200000
    27 3/4"5/8"Cast Iron7,500Yes1 1/2"2043K6300000
    34"3/16"Nickel4,000Yes5/8"2043K5400000
    35 1/8"3/16"304 Stainless Steel
    		4,000Yes5/8"2043K6400000
    35 1/8"3/16"Nickel4,000Yes5/8"2043K5500000
    36 1/8"3/16"304 Stainless Steel
    		4,000Yes5/8"2043K6500000
    36 1/8"3/16"Nickel4,000Yes5/8"2043K5600000

    Brass and Bronze Threaded Cleanout Plugs

    Image of Product. Raised. Front orientation. Pipe and Fittings. Brass and Bronze Threaded Cleanout Plugs.

    Raised

    Image of Product. Recessed. Front orientation. Pipe and Fittings. Brass and Bronze Threaded Cleanout Plugs.

    Recessed

    Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Recessed
    Raised
    Cleanout Plug
    OD/Fitting ID
    For Pipe
    Size
    Thread
    Type
    Material
    Each
    Each
    1 7/8"1 1/2
    		NPT
    		Brass2400K52000002400K7200000
    2 3/8"2
    		NPT
    		Brass2400K5300002400K730000
    2 27/32"2 1/2
    		NPT
    		Brass———02400K740000
    3 15/32"3
    		NPT
    		Brass2400K5500002400K750000
    3 31/32"3 1/2
    		NPT
    		Brass2400K56000002400K760000
    4 15/32"4
    		NPT
    		Brass2400K57000002400K7700000
    5 17/32"5
    		NPT
    		Brass2400K59000002400K7900000
    6"—NPT
    		Brass2400K6100000———0
    6 19/32"6
    		NPT
    		Brass2400K62000002400K8200000
    Plug Wrenches
    Each
    Plug Wrench for Recessed Plugs2400K1000000

    Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water

    These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Caps
    Image of Product. Front orientation. Pipe and Fittings. Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water, Caps, Cement Socket Female.

    Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Each
    Cement Socket Female
    1 1/4
    		40
    		PVCWhiteNot Rated2389K10100000
    1 1/2
    		40
    		PVCWhiteNot Rated2389K1020000
    2
    		40
    		PVCWhiteNot Rated2389K1030000
    3
    		40
    		PVCWhiteNot Rated2389K10400000
    4
    		40
    		PVCWhiteNot Rated2389K10500000
     
    Pipe Cement
    Each
    Pipe Cement for Max. Pipe Size 6 (8-fl. oz. Can)74605A91100000
    External-Square-Drive Plugs
    Image of Product. NPT Male. Front orientation. Pipe and Fittings. Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water, External-Square-Drive Plugs, Male, Threaded Fitting Connection.

    NPT Male

    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Each
    NPT Male
    1 1/4
    		40
    		PVCWhiteNot Rated2389K76100000
    1 1/2
    		40
    		PVCWhiteNot Rated2389K770000
    2
    		40
    		PVCWhiteNot Rated2389K780000
    3
    		40
    		PVCWhiteNot Rated2389K790000
    4
    		40
    		PVCWhiteNot Rated2389K810000
     
    180° Bend Connectors
    Image of Product. Front orientation. Pipe Traps. Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water, 180° Bend.

    180° Bend

    180° Bend Connectors—180° bend connectors are also known as U-bends.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Shape
    Each
    Cement Socket Female
    1 1/2
    		40
    		PVCWhiteNot Rated180° Bend2389K86000000
     
    Union 270° Bend Connectors
    Image of Product. Front orientation. Pipe Traps. Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water, Union 270° Bend.

    Union 270° Bend

    Union 270° Bend Connectors—270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Fitting Type
    Each
    Cement Socket Female
    1 1/4
    		40
    		PVCWhiteNot RatedUnion 270° Bend2389K82000000
    1 1/2
    		40
    		PVCWhiteNot RatedUnion 270° Bend2389K8300000
    2
    		40
    		PVCWhiteNot RatedUnion 270° Bend2389K8400000
     
    Union 270° Bend Adapters
    Image of Product. Front orientation. Pipe Traps. Drain, Waste, and Vent Standard-Wall PVC Pipe Fittings for Water, Union 270° Bend Adapter.

    Union 270° Bend Adapter

    Union 270° Bend Adapters—270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Fitting Type
    Each
    Cement Socket Female × Clamp-On Female
    1 1/2
    		40
    		PVCWhiteNot RatedUnion 270° Bend Adapter2389K85000000
     
    Thread Sealant
    Image of Product. Front orientation. Thread Sealants. Applicator-Top Can.

    Applicator-Top Can

    Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
    Container
    Size, fl.
    oz.
    Type
    Temp. Range,
    ° F
    Each
    8Applicator-Top Can-100 to 6004586K9000000

    Underground Drain, Waste, and Vent PVC Pipe Fittings for Water

    With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings. Made of PVC, they have good strength and corrosion resistance. All meet an ASTM specification and testing requirement for material quality, dimensions, and workmanship.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    External-Square-Drive Plugs
    Image of Product. NPT Male. Front orientation. Pipe and Fittings. Underground Drain, Waste, and Vent PVC Pipe Fittings for Water, External-Square-Drive Plugs, Male, Threaded Fitting Connection.

    NPT Male

    Pipe
    Size
    Sewer Pipe
    Trade Size
    Material
    Color
    Max. Pressure
    @ Temp.
    Each
    NPT Male
    3
    		3PVCWhiteNot Rated9102K33300000
    4
    		4PVCWhiteNot Rated9102K3340000
    6
    		6PVCWhiteNot Rated9102K33500000
     
    Thread Sealant
    Image of Product. Front orientation. Thread Sealants. Applicator-Top Can.

    Applicator-Top Can

    Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
    Container
    Size, fl.
    oz.
    Type
    Temp. Range,
    ° F
    Each
    8Applicator-Top Can-100 to 6004586K9000000

    ABS Threaded Cleanout Plugs

    Image of Product. Recessed. Front orientation. Pipe and Fittings. ABS Threaded Cleanout Plugs.

    Recessed

    Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Recessed
    Cleanout Plug
    OD/Fitting ID
    For Pipe
    Size
    Thread
    Type
    Material
    Each
    1 7/8"1 1/2
    		NPT
    		ABS9359T2100000
    2 3/8"2
    		NPT
    		ABS9359T220000
    2 27/32"2 1/2
    		NPT
    		ABS9359T230000
    3 15/32"3
    		NPT
    		ABS9359T240000
    3 31/32"3 1/2
    		NPT
    		ABS9359T250000
    4 15/32"4
    		NPT
    		ABS9359T260000
    6 19/32"6
    		UNC
    		ABS9359T2900000
    Plug Wrenches
    Each
    Plug Wrench for Recessed Plugs2400K1000000

    Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals

    Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies. All meet UL and ASTM standards for flame retardance and self-extinguishment in the case of fire. They also meet strict ASTM specifications and testing requirements for material quality and product dimensions. They’re compatible with Orion Blueline No-Hub and Orion Rionfuse chemical waste pipe and pipe fittings.
    Either a clamp connector or electrofusion connector is required to connect grooved ends on adapters to pipe or to another fitting with a grooved end. Clamp connectors can be easily taken apart as needed for maintenance. Grooving tools (sold separately) prepare ungrooved ends for clamping. Electrofusion connectors create a stronger, more permanent connection than clamp connectors. Use electrofusion tools (sold separately) to weld these fittings in place.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    External-Square-Drive Plugs/Straight Adapters
    Image of Product. Electrofusion Socket/Grooved-End Clamp-On Male. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, External-Square-Drive Plugs/Straight Adapters, Electrofusion Socket/Grooved-End Clamp-On Male, Hex Body.

    Electrofusion

    Socket/Grooved-End

    Clamp-On Male

    Adapters with a threaded pipe end connect and disconnect easily on that side, no clamp or welding required. Thread sealant tape (sold separately) prevents leaks in threaded connections. To prevent overtightening that could cause cracks and leaks, first finger-tighten fittings, then turn once or twice with a wrench.
    Pipe
    Size
    Body
    Shape
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Each
    Electrofusion Socket/Grooved-End Clamp-On Male
    1 1/2
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N202000000
    2
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N20300000
    3
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N205000000
    4
    		HexPolypropyleneBlueNot RatedASTM D635, UL 94 V-25389N206000000
     
    270° Bend Connectors
    Image of Product. Bottom orientation. Pipe Traps. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, 270° Bend.

    270° Bend

    270° Bend Connectors—270° bend fittings are also known as P-traps.
    Pipe
    Size
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Fitting
    Type
    Each
    Electrofusion Socket/Grooved-End Clamp-On Male
    1 1/2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2270° Bend5389N1020000000
    2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2270° Bend5389N103000000
     
    Union 270° Bend Connectors
    Image of Product. Bottom orientation. Pipe Traps. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, Union 270° Bend.

    Union 270° Bend

    Union 270° Bend Connectors—270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.
    Pipe
    Size
    Material
    Color
    Max. Pressure
    @ Temp.
    Flammability Rating
    Fitting Type
    Each
    Electrofusion Socket/Grooved-End Clamp On Male
    1 1/2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2Union 270° Bend5389N3020000000
    2
    		PolypropyleneBlueNot RatedASTM D635, UL 94 V-2Union 270° Bend5389N303000000
     

    Cleanout Plug Wrenches

    Image of Product. For Recessed-Head Cleanout Plug. Front orientation. Plug Wrenches. Cleanout Plug Wrenches.
    Image of Product. Front orientation. Plug Wrenches. Cleanout Plug Wrenches.

    For Recessed-Head

    Cleanout Plug

    Use this tool to install and remove recessed-head cleanout plugs.
    Tip Lg. (Wd.)
    Overall
    Lg.
    Material
    Color
    Each
    1 1/2" (1/2"), 1 1/4" (1 1/4"), 1" (1"), 1 1/8" (3/8"), 1 1/2" (1 1/2"), 7/8" (7/8")5 3/4"Powder-Coated IronRed2400K1000000

    Expansion Plugs with Bypass

    Image of Product. Bottom orientation. Expansion Plugs. Expansion Plugs with Bypass, Style L.

    Style L

    Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing. The seal expands to temporarily close off pipe openings.
    Style L—For Style L, twist the wing nut to expand the seal. They have a GHT bypass that connects to standard garden hoses. Ideal for pipe cleanout, they allow for easy, controlled drainage.
    Maximum Air Back Pressure—Maximum air back pressure is the amount of pressure a plug can withstand without moving.
    Maximum Water Back Pressure—Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
    For
    Pipe
    Max. Back
    Pressure
    Material
    Bypass
    Size
    ID
    Air,
    psi
    Water, ft.
    of head
    Overall
    Ht.
    Seal
    Bypass
    Cap
    Hose
    Size
    Thread
    Type
    Gender
    Each
    Style L
     
    Plastic Stem
    1 1/2
    		1.50" to 1.71"40923 3/4"PVC
    		Plastic3/4GHT
    		Male2566K5100000
    2
    		1.86" to 2.06"30693 3/4"PVC
    		Plastic3/4GHT
    		Male2566K520000
    3
    		2.84" to 3.09"20463 3/4"PVC
    		Plastic3/4GHT
    		Male2566K530000
    4
    		3.89" to 4.15"10233 3/4"PVC
    		Plastic3/4GHT
    		Male2566K540000
     

    Drain Valves for Thick Liquids

    Image of Product. Bottom orientation. Drain Valves. Drain Valves for Thick Liquids.
    Empty mud, sludge, and water from tanks, reservoirs, and basins. First designed for use on settling tanks in water treatment plants, these stainless steel drain valves won't corrode from washdowns and long-term exposure to waste. They install flush with the bottom of large vessels. Lift them up for drainage using a valve wrench or position indicator.
    Bolt
    Overall
    Pipe
    Size
    Pressure
    Class
    Flange
    OD
    Circle
    Dia.
    No. of
    Holes
    Hole
    Dia.
    Included
    Temp. Range,
    ° F
    Wd.
    Ht.
    Stem
    Type
    Drive Style
    Drive
    Size
    Valve
    Type
    For Use With
    Each
    316 Stainless Steel Body and Disc
    4
    		125
    		9"7 1/2"83/4"No35 to 1259 5/16"15 1/4"NonrisingExternal Square
    		2"GlobeWater, Thick Liquids8308N11000000000
    6
    		125
    		11"9 1/2"87/8"No35 to 12511 3/16"15 1/4"NonrisingExternal Square
    		2"GlobeWater, Thick Liquids8308N1200000000
    8
    		125
    		13 1/4"11 3/4"87/8"No35 to 12513 5/8"20 1/4"NonrisingExternal Square
    		2"GlobeWater, Thick Liquids8308N1300000000
    10
    		125
    		16"14 1/4"121"No35 to 12516 1/2"23 7/8"NonrisingExternal Square
    		2"GlobeWater, Thick Liquids8308N1400000000
    12
    		125
    		18 3/4"17"121"No35 to 12519 1/4"25 3/4"NonrisingExternal Square
    		2"GlobeWater, Thick Liquids8308N1500000000
     

    Expansion Plugs for Cleanout Tees

    Image of ProductInUse. Side1 orientation. Contains Inset. Expansion Plugs. Expansion Plugs for Cleanout Tees.
    Seal cleanout tees when testing your drain, waste, and vent systems for pressure and leaks—no need to inflate these plugs with an air compressor or hand pump. To install, insert the plug end into your pipe so the curved foot is on the bottom threads of the cleanout tee, then push down the handle to lock it into the foot. The foot has a two-stage release latch: lift the handle one notch to release the plug and allow liquid to drain slowly, then lift the handle again until the foot fully disengages to take out the plug.
    Maximum Air Back Pressure—Maximum air back pressure is the amount of pressure a plug can withstand without moving.
    Maximum Water Back Pressure—Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
    For
    Pipe
    Max. Back
    Pressure
    Steel Handle
    Size
    ID
    Air,
    psi
    Water, ft.
    of head
    Overall
    Ht.
    Temp. Range,
    ° F
    Seal Material
    For Use With
    Each
    2
    		2.067"651509 1/2"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N111000000
    3
    		3.068"6515011 3/4"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N11200000
    4
    		4.026"6515013 1/2"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N11300000
    6
    		6.065"358018"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N201000000
    8
    		7.981"204019"32 to 120Natural Rubber
    		ABS Pipe, Cast Iron Pipe, PVC Pipe6568N202000000
     

    Square-Head Expansion Plugs

    Image of Product. Front orientation. Exploded view. Expansion Plugs. Square-Head Expansion Plugs.
    Turn the square head of the plug into the sealing ring to close off pipe openings.
    Maximum Air Back Pressure—Maximum air back pressure is the amount of pressure a plug can withstand without moving.
    Maximum Water Back Pressure—Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
    For
    Pipe
    Max. Back
    Pressure
    Size
    ID
    Air,
    psi
    Water, ft.
    of head
    Overall
    Ht.
    Temp. Range,
    ° F
    Seal Material
    Each
    Plastic Head
    1 1/2
    		1.61" to 1.71"21502"35 to 210PVC
    		25655K7100000
    2
    		2.07" to 2.16"21502"35 to 210PVC
    		25655K720000
    3
    		3.07" to 3.16"21502"35 to 210PVC
    		25655K730000
    4
    		4.03" to 4.12"21502"35 to 210Polyurethane Rubber
    		25655K7400000
    6
    		6.07" to 6.16"13302"35 to 210Polyurethane Rubber
    		25655K7500000
     
    back to top