About Plastic
More
About Antifatigue Mats
More
Drawers for Workbenches

Plastic drawers are dent and rust resistant.
O'all | Drawer | Drawer Slide | Mtg. Holes | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Cap., lbs. | Color | Wd. | Dp. | Ht. | Type | Material | No. of | Dia. | Mtg. Fasteners Included | Each | |
17" | 17" | 4 3/4" | 20 | Beige | 15 1/4" | 14 3/4" | 4" | Friction | Plastic | 6 | 1/8" | No | 0000000 | 000000 |
Low-Profile Organizing Drawers for Workbenches

O'all | Drawer | Drawer Slide | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Cap., lbs. | Color | Wd. | Dp. | Ht. | Type | Material | Mtg. Fasteners Included | Each | |
Plastic | ||||||||||||
23 1/4" | 29" | 2" | 65 | Black | 20 1/2" | 15" | 1 3/4" | Ball Bearing | Steel | Yes | 0000000 | 000000 |
Drawer Liners and Bin Cups for Workbenches

Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts. Cut the liner to fit any size drawer.
The cutting guide allows you to cut a straight edge with a utility knife.
Wd. | Dp. | Thick. | Material | Color | Each | |
17 3/4" | 36 5/8" | 1/32" | Plastic | Black | 0000000 | 000000 |
Wd. | Dp. | Ht. | Thick. | Material | Color | Each | |
2 3/8" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 00000 |
3 1/2" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
3 1/2" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 5/8" | 3 1/2" | 1 7/8" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 5/8" | 4 5/8" | 1 7/8" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 3/4" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
7 1/8" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
9 1/2" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |

Material | Color | Each | |
Plastic | Red | 0000000 | 00000 |
Plastic Small-Parts Cabinets








These cabinets won't dent, chip, or rust.
Drawers | Overall | Mounting Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Total No. of Drawers | No. of | No. Across | No. Down | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Color | No. of | Dia. | Each | |
Assembled | ||||||||||||||
16 | 16 | 4 | 4 | 1 1/2" | 2" | 5 1/4" | 8 1/2" | 10 1/2" | 6 1/2" | Black | 4 | 3/16" | 0000000 | 000000 |
22 | 6 8 2 6 | 2 4 2 3 | 3 2 1 2 | 1 1/4" 1 1/4" 2" 2" | 2" 2" 4 1/4" 4 1/4" | 5 1/2" 5 1/2" 5 1/2" 5 1/2" | 10" | 19 1/2" | 6 1/4" | Gray | 2 | 3/8" | 0000000 | 00000 |
24 | 24 | 4 | 6 | 2" | 4 1/4" | 5 1/4" | 16" | 20" | 6 1/2" | Black | 4 | 3/16" | 0000000 | 00000 |
26 | 15 8 2 1 | 5 4 2 1 | 3 2 1 1 | 1 3/8" 2 1/4" 2 1/4" 2 1/4" | 2" 2 1/2" 5 3/8" 10 7/8" | 5 3/8" 5 3/8" 5 3/8" 5 3/8' | 16 1/2" | 12" | 6 1/4" | Gray | 4 | 7/16" | 0000000 | 00000 |
26 | 6 20 | 4 2 | 5 3 | 1 1/2" 2" | 2" 4 1/4" | 5 1/4" 5 1/4" | 10" | 20" | 6 1/2" | Black | 4 | 3/16" | 0000000 | 00000 |
30 | 30 | 5 | 6 | 1 3/8" | 2" | 5 3/8" | 11 1/4" | 12" | 6 1/4" | Gray | 4 | 7/16" | 0000000 | 00000 |
44 | 32 12 | 8 4 | 4 3 | 1 1/2" 2" | 2" 4 1/4" | 5 1/4" 5 1/4" | 16" | 20" | 6 1/2" | Black | 4 | 3/16" | 0000000 | 00000 |
45 | 45 | 5 | 9 | 1 3/8" | 2" | 5 3/8" | 16 1/2" | 12" | 6 1/4" | Gray | 4 | 7/16" | 0000000 | 00000 |
64 | 64 | 8 | 8 | 1 1/2" | 2" | 5 1/4" | 16" | 20" | 6 1/2" | Black | 4 | 3/16" | 0000000 | 00000 |
Conductive Small-Parts Cabinets


Cabinets have a grounding cord to protect your sensitive components from electrostatic damage.
Plastic Stackable Small-Parts Cabinets with Compartmented Boxes


Plastic cabinet and boxes won't dent, chip, or rust. Remove individual boxes to take the parts you need without moving the entire storage unit. Use the included dividers to create from 4 to 20 compartments.
Drawer Cabinet Organizers

Keep tools and small parts in place and protected from damage.
Ht. | Wd. | Dp. | Number of Compartments | Material | Color | Each | |
1 1/4" | 16" | 11" | 10 | Plastic | Black | 00000000 | 000000 |
Rust-Inhibiting Drawer Cabinet Liners

Not only will these liners protect your tools from scratches and dents, they’re treated to also protect against rust.
For technical drawings and 3-D models, click on a part number.
Wd. | Thick. | Material | Color | Surface Construction | Length | Each | |
22 1/2" | 0.125" | Plastic | Black | Smooth | 118" | 0000000 | 000000 |
Drawer Cabinet Liners

Protect drawer beds and tools from scratches and dents.
Wd. | Thick. | Material | Color | Surface Construction | Max. Lg., ft. | Per Ft. | |
24" | 1/8" | Plastic | Black | Smooth | 100 | 0000000 | 00000 |
Keyboard Trays

Adjustability | Material | Ht. | Wd. | Dp. | Mounting Hardware Included | Each | ||
Trays | ||||||||
---|---|---|---|---|---|---|---|---|
A | In/Out | Plastic | 1 3/8" | 20 1/2" | 12" | Yes | 00000000 | 000000 |
Stackable Tilt-Out Bins






Bins can be stacked on a surface, wall mounted, or attached to a rack.
Adjustable bins come with three dividers to create between 1 and 4 bin compartments.
Bins | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bins | Overall | Mounting | Optional Dividers | |||||||||||||||
Total No. of Bins | Wd. | Ht. | Dp. | Color | Ht. Used per Bin | Wd. | Dp. | Cap., lbs. | Max. No. of Stackable Units | Color | Fasteners Included | No. of Holes | Dia. | Each | Pkg. Qty. | Pkg. | ||
Plastic | ||||||||||||||||||
Fixed Bins | ||||||||||||||||||
3 | 7 3/8" | 8 5/8" | 5 7/8" | Clear | 9 1/2" | 23 5/8" | 7 1/2" | 50 | 3 | Beige | No | 2 | 5/16" | 0000000 | 000000 | 3 | 0000000 | 000000 |
4 | 5 5/8" | 7 1/2" | 5" | Clear | 8" | 23 5/8" | 6 1/2" | 50 | 3 | Beige | No | 2 | 5/16" | 0000000 | 00000 | 4 | 0000000 | 00000 |
5 | 4 1/4" | 5 3/4" | 3 3/4" | Clear | 6 1/2" | 23 5/8" | 5" | 40 | 4 | Beige | No | 2 | 5/16" | 000000 | 00000 | __ | 000000 | 00 |
6 | 3 1/2" | 3 3/4" | 2 5/8" | Clear | 4 1/2" | 23 5/8" | 3 1/2" | 40 | 4 | Beige | No | 2 | 5/16" | 000000 | 00000 | __ | 000000 | 00 |
9 | 2 1/8" | 2 1/2" | 1 3/4" | Clear | 3" | 23 5/8" | 2 1/2" | 40 | 4 | Beige | No | 2 | 5/16" | 000000 | 00000 | __ | 000000 | 00 |
Adjustable Bins | ||||||||||||||||||
1, 2, 3, 4 | 3"-11" | 5 3/4" | 3 3/4" | Clear | 6" | 11 7/8" | 5 15/16" | Not Rated | 4 | Beige | No | 2 | 5/16" | 00000000 | 00000 | 4 | 0000000 | 00000 |
T-Slotted Framing Slides, Tracks, and Rollers
Slide drawers, panels, and doors with these tracks and rollers.
For technical drawings and 3-D models, click on a part number.




Rail slides allow one rail to slide along another. Made from a single piece of plastic, they can be cut to size for a variety of applications. Adjust their positioning without fasteners. While simple to install, they are less secure than heavy duty rail slides.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail slides with a flat side attach to a component with fasteners. You can place heavy components on top without using fasteners.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-reducer allow you to transition between differently sized rails.
For Rail Ht. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
T × Flat | ||||||||||
1" | 2" | 3" | 1 7/8" | 13/16" | 8 | White | Plastic | No | 0000000 | 00000 |
1 1/2" | 3" | 4 1/2" | 2 13/16" | 1 1/4" | 35 | White | Plastic | No | 0000000 | 0000 |
25mm | 50mm | __ | 1 13/16" | 13/16" | 12 | White | Plastic | No | 0000000 | 0000 |
40mm | 80mm | 120mm | 2 15/16" | 1 1/4" | 25 | White | Plastic | No | 0000000 | 0000 |
45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × Straight | ||||||||||
45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T | ||||||||||
30mm | 60mm | 120mm | 3 1/8" | 1" | Not Rated | White | Plastic | No | 0000000 | 0000 |
45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T-Reducer | ||||||||||
30mm, 45mm | 60mm, 90mm | 120mm | 2 3/8" | 7/8" | Not Rated | White | Plastic | Yes | 0000000 | 0000 |





Pivoting rail slides can rotate rails 360° even while sliding along the other T-slotted rail. They are often used to make an accordion or bifold door.
To install perpendicular slides, tap a hole in the end of the rail and screw in the slide.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail Slides | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Ht. | Taps | ||||||||||||
Single | Double, Quad | Triple | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Required Tap Thread Size | Each | Each | ||
Perpendicular Pivot | |||||||||||||
Straight | |||||||||||||
1" | 2" | 3" | 1" | 13/16" | 6 | White | Plastic | Yes | 1/4"-20 | 0000000 | 00000 | 00000000 | 00000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 1/2" | 1 1/4" | 13 | White | Plastic | Yes | 5/16"-18 | 00000000 | 0000 | 00000000 | 0000 |
25mm | 50mm | __ | 1" | 13/16" | 7 | Black | Plastic | Yes | M6 | 0000000 | 0000 | 0000000 | 0000 |
40mm | 80mm | 120mm | 1 1/2" | 1 1/4" | 20 | Black | Plastic | Yes | M8 | 00000000 | 0000 | 0000000 | 0000 |
T | |||||||||||||
1", 25mm | 2", 50mm | 3" | 1" | 1" | 6 | White | Plastic | Yes | 1/4"-20 | 0000000 | 00000 | 00000000 | 0000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 1/2" | 1 1/2" | 13 | White | Plastic | Yes | 5/16"-18 | 0000000 | 00000 | 00000000 | 0000 |
Inline Pivot | |||||||||||||
Straight | |||||||||||||
20mm | 40mm | __ | 13/16" | 11/16" | 6 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
30mm | 60mm | __ | 1 3/16" | 1 1/16" | 8 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
40mm | 80mm | 120mm | 1 9/16" | 1 9/16" | 13 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
Low-Friction FEP Tape

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Wd. | Overall Thick. | Facing Material | Material | Adhesive Type | Temp. Range, °F | Each | |
15 ft. | |||||||
---|---|---|---|---|---|---|---|
White—FEP Plastic | |||||||
1" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
2" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 00000 |
4" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
25" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
108 ft. | |||||||
White—FEP Plastic | |||||||
1" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
2" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
4" | 0.01" | FEP Plastic | PVC Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
Clear Static-Dissipative Moisture-Resistant Polyester Film

- Color: Clear
- Max. Temperature: 150° F
- Tensile Strength: 25,000 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Not rated
- For Use Outdoors: No
A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment. It is also known as PET and PETE.
For technical drawings and 3-D models, click on a part number.
Clear Moisture-Resistant Polyester Film

Widely used as packaging, this polyester film absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.
For technical drawings and 3-D models, click on a part number.
- Color: Clear
- Temperature Range: -20° to 150° F
- Tensile Strength: 26,000 psi (Excellent)
- Impact Strength: 0.7 ft.-lbs./in. (Poor)
- Hardness: Rockwell R125 (Hard)
- For Use Outdoors: No
Thick. | Thick. Tolerance | Adhesive Type | Adhesive Temperature, °F | Each | |
27" × 20" | |||||
---|---|---|---|---|---|
0.002" | -0.0002" to 0.0002" | Acrylic | -20° to 150° | 0000000 | 00000 |
0.005" | -0.0005" to 0.0005" | Acrylic | -20° to 150° | 0000000 | 0000 |
27" × 38" | |||||
0.002" | -0.0002" to 0.0002" | Acrylic | -20° to 150° | 0000000 | 0000 |
0.005" | -0.0005" to 0.0005" | Acrylic | -20° to 150° | 0000000 | 0000 |
27" × 150ft. | |||||
0.002" | -0.0002" to 0.0002" | Acrylic | -20° to 150° | 0000000 | 000000 |
0.005" | -0.0005" to 0.0005" | Acrylic | -20° to 150° | 0000000 | 000000 |
54" × 150ft. | |||||
0.002" | -0.0002" to 0.0002" | Acrylic | -20° to 150° | 0000000 | 000000 |
0.005" | -0.0005" to 0.0005" | Acrylic | -20° to 150° | 0000000 | 000000 |