Drill Bit Storage Cases | McMaster-Carr

Filter by

Length Class

For Drill Bit System of Measurement

Material

System of Measurement

Drill Bit Size

Number of Drill Bits

Container Type

Height

Overall Length

Number of Compartments

Length

Width

For Use With

Overall Width

Overall Height

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Number of Drawers

Color

Drawer Depth

Drawer Width

Finish

Organizer Type

85 Products

Tap and Drill Bit Cases

For Drill Bits


Steel	Plastic

Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.

Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.

Plastic—Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.

		For Drill Bit		Overall
	Material	No. of	Size	Dia.	Lg.	Wd.	Ht.	Features		Each
For Inch Drill Bits







				For Jobbers' Length

				Steel	13	1/16" to 1/4" (Increments of 1/64")	—	5 3/8"	4"	3/8"	—	2961A33	00000


				Steel	15	1/16" to 1/2" (increments of 1/32")	—	7"	4"	1 1/4"	—	2961A22	00000
				Steel	16	1/64" to 1/4" (increments of 1/64")	—	5 3/8"	4"	3/8"	—	2961A27	00000
				Steel	21	1/16" to 3/8" (Increments of 1/64")	—	6"	4"	1 1/8"	—	2961A12	00000
				Steel	29	1/16" to 1/2" (Increments of 1/64")	—	7"	4"	1 3/4"	—	2961A11	00000
				Plastic	29	1/16" to 1/2" (Increments of 1/64")	3"	—	—	6 5/8"	Belt Clip	2961A61	00000




						For Maintenance Length

						Plastic	29	1/16" to 1/2" (Increments of 1/64")	3 7/8"	—	—	7"	Belt Clip	2961A75	00000




								For Short Length

								Steel	29	1/16" to 1/2" (Increments of 1/64")	—	7"	4"	1 3/4"	—	2961A72	00000




										For Extended Length—8" Maximum Drill Bit Length

										Steel	29	1/16" to 1/2" (Increments of 1/64")	—	8 3/4"	4"	1 3/4"	—	2961A34	00000




												For Reduced-Shank Length—1/2" Drill Bit Shank Size

												Steel	8	9/16" to 1" (increments of 1/16")	—	8 1/2"	6 1/4"	2"	—	2961A35	00000


												For Wire Gauge Drill Bits







																For Jobbers' Length

																Steel	20	80 Ga. to 61 Ga.	—	2"	1 1/2"	1/4"	—	2961A17	0000


																Steel	60	60 Ga. to 1 Ga.	—	4 1/2"	3 1/4"	1"	—	2961A16	00000




	For Short Length

	Steel																60	60 Ga. to 1 Ga.	—	4 1/2"	3 1/4"	1"	—	2961A73	00000


	For Letter Size Drill Bits







																		For Jobbers' Length

																		Steel	26	A to Z	—	7"	4"	1 3/4"	—	2961A19	00000




				For Short Length

				Steel	26															A to Z	—	7"	4"	1 3/4"	—	2961A71	00000


				For Metric Drill Bits







																				For Jobbers' Length

																				Steel	13	1.0 mm to 7.0 mm (Increments of 0.5 mm)	—	5 1/2"	4"	1/2"	—	2961A28	0000


								Steel	19											1.0 mm to 10.0 mm (Increments of 0.5 mm)	—	6"	4"	1 1/8"	—	2961A29	00000
								Steel	25											1.0 mm to 13.0 mm (Increments of 0.5 mm)	—	7"	4"	1 3/4"	—	2961A25	00000
								Steel	41											6.0 mm to 10.0 mm (Increments of 0.1 mm)	—	7 1/8"	4 1/2"	2 1/2"	—	2961A32	00000
								Steel	50											1.0 mm to 5.9 mm (Increments of 0.1 mm)	—	4 1/2"	3 1/4"	1"	—	2961A31	00000


								For Inch, Wire Gauge, Letter Size Drill Bits







												For Jobbers' Length

												Steel	19							1/16", 1/2", 1/4", 1/8", 21 Ga., 25 Ga., 37/64", 29 Ga., 3/16", 3/32", 3/8", 5/16", 5/32", 5/64", 7 Ga., 7/16", 7/32", F, U	—	7"	4"	1 1/4"	—	2961A43	00000


												Steel	115	1/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z	—					13 1/2"	4 5/8"	2 1/4"	—	2798A12	00000
												Steel	135	1/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga., A to Z	—					13 1/2"	4 5/8"	2 1/4"	—	2798A13	00000




For Short Length

Steel														115	1/16" to 1/2" (Increments of 1/64"), 60 Ga. to 1 Ga., A to Z	—				4 5/8"	13 1/2"	2 1/4"	—	2961A74	00000


For Inch, Wire Gauge, Metric Drill Bits







															For Jobbers' Length

			Steel												134	1.0 mm to 13.0 mm (Increments of 0.5 mm), 1/16" to 1/2" (Increments of 1/64"), 80 Ga. to 1 Ga.				—	13 1/2"	4 5/8"	2 1/4"	—	2798A14	00000

For Taps

These cases close for easy transport and are labeled with sizes for organizing tools. Taps are not included.

Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.

No. of Taps Stored	Holds Tap Sizes	Lg.	Wd.	Ht.		Each



Steel	21	Three each of Nos. 6, 10 Three each of 1/4", 5/16", 3/8", 7/16", 1/2"	6 3/16"	4 3/8"	1 3/8"	2656A11	000000

For Taps and Drill Bits

These cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.

Steel—Steel cases have stands that fold in and out. Stand them up when you need them, then fold them back into the slim case for storage inside a workbench drawer.

No. of Taps Stored	Holds Tap Sizes	No. of Drill Bits Stored	Holds Drill Bit Sizes	Lg.	Wd.	Ht.		Each



Steel	9	One each of Nos. 6-32, 8-32, 10-24, 10-32 One each of 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13	9	One each of Nos. 36, 29, 25, 21, 7 One each of 5/16", 27/64" One each of F, U	7"	4"	1 1/4"	2794A74	000000


Steel	9	One each of Nos. 6-40, 8-36, 10-24, 10-32 One each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20	9	One each of Nos. 33, 29, 25, 21, 3 One each of 25/64", 29/64" One each of I, Q	7"	4"	1 1/4"	2794A75	00000
Steel	9	One each of M2.5 × 0.45, M3 × 0.5, M3.5 × 0.6, M4 × 0.7, M5 × 0.8, M6 × 1, M8 × 1.25, M10 × 1.5, M12 × 1.75	9	One each of 2.05, 2.5, 2.9, 3.3, 4.2, 5, 6.7, 8.5, 10.2 mm	7"	4"	1 1/4"	2794A77	00000

Drill Bit Drawer Cabinets

Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents. They can be stacked up to three high.

			For Drill Bit		Overall
	No. of Compartments	No. of Drawers	Size	Lg. Class	Lg.	Wd.	Ht.	Material	Features	Includes		Each
For Inch Drill Bits



		29	3	1/16" to 1/2" (Increments of 1/64")	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A1	0000000


		For Wire Gauge Drill Bits



				60	5	60 Ga. to 1 Ga.	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A2	000000


				84	5	80 Ga. to 1 Ga.	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A8	000000


				For Letter Size Drill Bits



						28	3	A to Z	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A3	000000


						For Metric Drill Bits



								29	3	1.0 mm to 13.0 mm (Increments of 0.5 mm)	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A4	000000


								60	5	1.0 mm to 6.9 mm (Increments of 0.1 mm)	Jobbers	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2962A5	000000
								138	4	0.35 mm to 2.5 mm (Increments of 0.05 mm) 2.6 mm to 10.0 mm (Increments of 0.1 mm) 10.2 mm 10.5 mm 10.8 mm 11.0 mm 11.2 mm 11.5 mm 11.8 mm 12.0 mm 12.2 mm 12.5 mm 13.0 mm	Jobbers, Short	26"	12"	12 1/2"	Steel	Built-In Lock, Undivided bottom drawer for general storage	Two Keys	8922A44	000000


								For Inch, Wire Gauge, Letter Size Drill Bits



										159	4	1/16" to 1/2" (Increments of 1/64") 60 Ga. to 1 Ga. A to Z	Jobbers	26"	12"	12 1/2"	Steel	Built-In Lock, Undivided bottom drawer for general storage	Two Keys	8922A31	000000

Drill Bit Pouches


For 7 Drill Bits	For 15 Drill Bits

Attach these pouches to your belt to easily access drill bits while working.

	For Drill Bit					Pocket
	No. of	Size	Lg. Class	Wd.	Ht.	Wd.	Ht.	No. of Compartments	Material	Closure Method	Color	Includes		Each
For Inch Drill Bits



		7	1/16" to 1/4"	Jobbers	3 1/4"	4 3/4"	1/2" to 3/4"	2 1/4" to 2 3/4"	7	Canvas	Hook and Loop	Black	Plastic Clip	2623N1	000000


		7	1/8" to 1/2"	Jobbers	3 3/4"	6 1/2"	3/4" to 1"	2 1/2" to 2 3/4"	7	Canvas	Hook and Loop	Black	Plastic Clip	2623N2	00000
		15	1/16" to 1/2"	Jobbers	5 1/4"	7 1/4"	1/2" to 1 1/2"	1 3/4" to 5 1/2"	15	Canvas	Hook and Loop	Black	Plastic Clip	2623N3	00000

Reduced-Shank Drill Bit Drawer Cabinets

Store two bits of each size. These cabinets have drawers marked with the bit sizes. They can be stacked up to three high.

			For Drill Bit		Overall
	No. of Compartments	No. of Drawers	Size	Shank Size	Lg.	Wd.	Ht.	Material		Each
For Inch Drill Bits



		23	3	1", 1 1/32", 1 1/16", 1 1/8", 1 5/32", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2"	1/2"	14 5/8"	7 3/8"	7 3/4"	Steel	2755A32	0000000


		60	5	33/64" to 63/64" (Increments of 1/64")	1/2"	14 5/8"	7 3/8"	7 3/4"	Steel	2755A31	000000

Cutting Tool Workbench Drawers

Mount this drawer underneath a workbench or shelf and store multiple drill bits of each size. The compartments are marked with the bit size and decimal equivalent.

			For Drill Bit		Overall
	No. of Compartments	No. of Drawers	Size	Lg. Class	Lg.	Wd.	Ht.	Material	Features	Includes	Mounting Hole Dia. (No. of)	Mounting Fasteners Included		Each
For Inch Drill Bits



		42	1	1/16" to 1/2" (Increments of 1/64")	Jobbers, Short	24 1/4"	12 1/2"	4 1/2"	Steel	Built-In Lock	Two Keys	1/4" (4)	No	2786A11	0000000

Design-Your-Own Stackable Workbench Drawers

Stack these drawers under a workbench. You can stack drawers with different heights as long as they have the same width and depth.

Painted Steel Drawers—Keyed

Keyed Drawers Stacked

Three High

Overall						Drawer			Drawer Slide				Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Color	Ga.	Wd.	Dp.	Ht.	Type	Material	Lock Included	No. of Keys Included	No. of	Dia.	Mounting Fasteners Included		Each
15 1/2"	16 1/2"	3 3/4"	75	Gray	18	14"	16"	3"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T51	0000000
15 1/2"	16 1/2"	5 3/4"	75	Gray	18	14"	16"	5"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T52	000000
15 1/2"	16 1/2"	11 3/4"	75	Gray	18	14"	16"	11"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T53	000000
15 1/2"	23 1/2"	3 3/4"	75	Gray	18	14"	23"	3"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T61	000000
15 1/2"	23 1/2"	5 3/4"	75	Gray	18	14"	23"	5"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T62	000000
15 1/2"	23 1/2"	11 3/4"	75	Gray	18	14"	23"	11"	Ball Bearing	Steel	Yes	2	4	1/2"	Yes	3330T63	000000

Low-Profile Organizing Workbench Drawers

Plastic Drawers

Overall					Drawer			Drawer Slide		Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Color	Wd.	Dp.	Ht.	Type	Material	No. of	Dia.	Mounting Fasteners Included		Each
23 1/4"	29"	2"	65	Black	20 1/2"	15"	1 3/4"	Ball Bearing	Steel	8	5/32"	Yes	5165T23	000000

Multi-Compartment Belt Pouches


Style L	Style N

Slip these pouches onto your belt to keep several tools within reach.

Styles L and N—Styles L and N have a magnetic panel on the front that can hold bits and fasteners for easy access.

Style	Wd.	Dp.	Ht.	No. of Compartments	For Max. Belt Wd.	Closure Method	Material	Color	Features		Each
L	6 1/2"	2 1/2"	7 1/2"	3	1 1/2"	Open Top	Polyester Fabric	Gray	Magnetic Front	2731N11	000000
N	7 1/2"	2"	11"	2	3"	Buckle	Polyester Fabric	Black	Magnetic Front	2731N12	00000

Tap and Drill Bit Cabinets

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

	Holds Drill Bit Sizes	No. of Compartments	No. of Drawers	Lg.	Wd.	Ht.	Material	Includes		Each
For Taps



	Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"	—	26	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	2543A46	0000000


	Multiples of M3, M4, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24	—	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	2543A49	000000
	Multiples of Nos. 2-56, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28	—	60	5	14 5/8"	7 3/8"	7 3/4"	Steel	—	2543A48	000000
	Multiples of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2"; Multiples of M2.5, M3, M4, M4.5, M5, M6. M6.3, M7, M8, M9, M10, M11, M12, M14, M16, M18, M20, M24, M30	—	152	4	26"	12"	12 1/2"	Steel	Lock, Two Keys	2551A72	000000


	For Taps and Drill Bits



			Multiples of Nos. 6, 8, 10; Multiples of 1/4", 5/16", 3/8", 7/16", 1/2"	Multiples of Nos. 36, 29, 25, 21, 7, 3; Multiples of F, I, U, Q; Multiples of 5/16", 25/64", 27/64", 29/64"	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	25475A71	000000


			For Pipe Taps



					Multiples of 1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 Pipe	—	21	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	2543A51	000000

Bur Organizers

Store and organize your burs with these containers. You can also use them to create a custom set from our offering of burs.

Fabric Pouch

Take burs on the go. These pouches roll up and fit in your pocket, so you can transport your burs without a bulky case.

For No. of Burs	For Shank Dia.	For Overall Lg.		Each
4	1/4"	2 1/4" to 3"	9880N22	000000
6	1/4"	2 1/4" to 3"	9880N23	00000

Plastic Case

Quickly ensure your burs are put away at the end of the day. These cases have a transparent cover, so you can see if any burs are missing without needing to remove it.

For No. of Burs	For Shank Dia.	For Overall Lg.		Each
5	1/4"	1 1/2" to 3"	9880N24	000000

Wood Box

Our most durable container to store your burs. These wood boxes resist cracking and breaking better than plastic ones.

For No. of Burs	For Shank Dia.	For Overall Lg.		Each
5	1/8"	1 1/2" to 2"	9880N12	000000
5	1/4"	1 1/2" to 2"	9880N11	00000
8	1/8"	1 1/2" to 1 7/8"	9880N13	00000
8	1/4"	1 1/2" to 3"	9880N21	00000
12	1/8"	1 1/2"	9880N15	00000
12	1/4"	1 1/2" to 3"	9880N14	00000
16	1/8"	1 1/2" to 3"	9880N19	00000
16	1/4"	1 1/2" to 3"	9880N16	00000

Workbench Drawers

These add-on drawers mount to workbenches to keep tools and small items organized and within reach.

Painted Steel Drawers—Keyed

Overall						Drawer			Drawer Slide				Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Color	Ga.	Wd.	Dp.	Ht.	Type	Material	Lock Included	No. of Keys Included	No. of	Dia.	Mounting Fasteners Included	Includes		Each
13 3/4"	20 1/4"	5"	100	Green	18	12 1/2"	19 5/8"	3 7/8"	Ball Bearing	Steel	Yes	2	8	9/32"	Yes	Tray	4772T41	0000000
13 3/4"	20 1/4"	6"	100	Green	18	12 1/2"	19 5/8"	4 7/8"	Ball Bearing	Steel	Yes	2	8	9/32"	Yes	Tray	4772T42	000000
15 3/4"	22"	7"	100	Green	18	14 1/2"	21 5/8"	5 7/8"	Ball Bearing	Steel	Yes	2	8	9/32"	Yes	Tray	4772T44	000000
19 3/4"	24"	7"	100	Green	18	18 1/2"	23 5/8"	5 7/8"	Ball Bearing	Steel	Yes	2	8	9/32"	Yes	Tray	4772T45	000000
21 3/4"	20 1/2"	7"	100	Green	18	20 1/2"	19 5/8"	5 7/8"	Ball Bearing	Steel	Yes	2	8	9/32"	Yes	Tray	4772T46	000000
24 1/4"	12 1/2"	4 1/2"	200	Silver	18	23 1/8"	11"	3"	Ball Bearing	Steel	Yes	2	4	1/4"	No	—	2786A14	000000

Painted Steel Drawers—Padlockable

Overall						Drawer			Drawer Slide			Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Color	Ga.	Wd.	Dp.	Ht.	Type	Material	Lock Included	No. of	Dia.	For Max. Shackle Dia.	Mounting Fasteners Included	Includes		Each
13 3/4"	20 1/4"	5"	100	Green	18	12 1/2"	19 5/8"	3 7/8"	Ball Bearing	Steel	No	8	9/32"	3/8"	Yes	Padlock Hasp	4772T11	0000000
13 3/4"	20 1/4"	6"	100	Green	18	12 1/2"	19 5/8"	4 7/8"	Ball Bearing	Steel	No	8	9/32"	3/8"	Yes	Padlock Hasp	4772T12	000000
15 3/4"	22"	7"	100	Green	18	14 1/2"	21 5/8"	5 7/8"	Ball Bearing	Steel	No	8	9/32"	3/8"	Yes	Padlock Hasp	4772T14	000000
19 3/4"	24"	7"	100	Green	18	18 1/2"	23 5/8"	5 7/8"	Ball Bearing	Steel	No	8	9/32"	3/8"	Yes	Padlock Hasp	4772T15	000000
21 3/4"	20 1/2"	7"	100	Green	18	20 1/2"	19 5/8"	5 7/8"	Ball Bearing	Steel	No	8	9/32"	3/8"	Yes	Padlock Hasp	4772T16	000000

Stainless Steel Drawers

Stainless steel drawers meet NSF/ANSI 2 for use with food.

Overall					Drawer			Drawer Slide		Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Ga.	Wd.	Dp.	Ht.	Type	Material	No. of	Dia.	Mounting Fasteners Included	Environment	Food Industry Std.		Each
16"	21 3/4"	5"	40	22	15"	20"	4 3/4"	Friction	Plastic	4	5/16"	No	Food and Beverage, Sanitary	NSF/ANSI 2	4405T88	0000000
21"	21 1/2"	5"	40	22	20"	20"	4 3/4"	Roller Bearing	Stainless Steel	4	5/16"	No	Food and Beverage, Sanitary	NSF/ANSI 2	4405T89	000000

Plastic Drawers

Plastic drawers are dent and rust resistant.

Overall					Drawer			Drawer Slide		Mounting Holes
Wd.	Dp.	Ht.	Wt. Cap., lb.	Color	Wd.	Dp.	Ht.	Type	Material	No. of	Dia.	Mounting Fasteners Included		Each
17"	17"	4 3/4"	20	Beige	15 1/4"	14 3/4"	4"	Friction	Plastic	6	1/8"	No	4614T32	000000

End Mill Storage Cabinets

Organize and store multiple end mills of each size. These cabinets have drawers marked with end mill size for easy identification. They are stackable.

			Overall
For End Mill Dia.	No. of Compartments	No. of Drawers	Lg.	Wd.	Ht.	Material	Color		Each



	9/16", 11/16", 7/8" (1 Each) 3/16", 5/16", 7/16", 5/8", 1" (2 Each) 1/8", 1/4", 3/8", 3/4" (3 Each) 1/2" (4 Each)	29	3	14 5/8"	7 3/8"	7 3/4"	Epoxy-Coated Steel	Gray	28345A17	0000000

Magnetic Pouches for Drills

This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.

			Pocket
	Wd.	Ht.	Wd.	Ht.	No. of Compartments	Material	Closure Method	Color	Includes		Each
For Inch, Metric, Letter Size, Wire Gauge Drill Bits



		4"	3"	3 3/4" to 4"	3 1/4" to 3 1/2"	1	Nylon Fabric	Zipper	Black	Adhesive-Back Hook and Loop	2658N11	000000