These jobbers'-length bits have the rigidity and length required for most applications. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.

Gold-oxide drill bits produce less friction than uncoated drill bits.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits. Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

Drill bits with a split point keep centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow. With better heat and wear resistance than high-speed steel, these cobalt steel bits can run up to 25% faster and have a longer tool life. All are jobbers’ length so they have the rigidity and length required for most applications. A split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

These jobbers'-length bits have the rigidity and length required for most applications. Made of carbide-tipped steel, which has better wear resistance than high-speed steel and cobalt steel, they maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

Drill bits with a split point keep centered without a pilot hole.

Drill bits with 135° point angle produce smaller chips than 118° point to prevent clogging.

For technical drawings and 3-D models, click on a part number.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than standard-length drill bits. Made of carbide-tipped steel, which has better wear resistance than high-speed steel and cobalt steel, they maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

For technical drawings and 3-D models, click on a part number.

The shank has a smaller diameter than the tip, allowing you to drill large holes with machines that have small-capacity chucks. Also known as Silver and Deming bits, they have a 1/2” diameter shank.

Drill bits with flats on shank have three flat sides to prevent the bit from slipping in the drill chuck.

Drill bits with a split point keep centered without a pilot hole.

The straight flutes and notched point withstand the heavy pressure necessary to penetrate hard steel. These carbide-tipped bits maintain their sharp edges when drilling abrasive material. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill. They are jobbers' length and have the rigidity and length required for most hand-held drilling and machine tool applications.

For technical drawings and 3-D models, click on a part number.

The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic. These bits are jobbers' length and have the rigidity and length required for most applications.

For technical drawings and 3-D models, click on a part number.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life. Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws. These bits are maintenance length, also known as mechanics’ length. They are shorter and more rigid than jobbers’ bits but longer than short-length bits. The split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.