16.0 mm Drill Bits | McMaster-Carr

Drill multiple hole sizes using only one bit. These have steps with progressively larger diameters—the deeper they drill, the bigger the hole. Count the steps as you drill to achieve the proper size. These bits also deburr as they cut, so they're good for thin materials like sheet metal and plastic panels. Wear and heat resistant, high-speed steel is versatile for use on a range of materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

			Shank
Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Type	Size	Drill Bit Point Type	Mfr.		Each







			Black Oxide

			4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874"	65	Round/3-Flat	6.4 mm	Standard	Milwaukee	5910N21	000000


			6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0, 22.0, 24.0, 26.0, 28.0, 30.0, 32.0, 35.0	0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661", 0.9449", 1.0236", 1.1024", 1.1811", 1.2598", 1.378"	89	Round/3-Flat	9.53 mm	Standard	Milwaukee	5910N22	000000




					Titanium Aluminum Nitride (TiAlN) Coated

					4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874"	76	Quick-Change Hex	6.35 mm	Standard	Milwaukee	89275A36	00000


					4.0, 14.0, 16.0, 18.0, 20.0, 22.0, 24.0, 26.0, 28.0, 30.0	0.1575", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661", 0.9449", 1.0236", 1.1024", 1.1811"	95	Hex	6.35 mm	Standard	Milwaukee	89275A37	000000




							Uncoated

							4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0, 22.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661"	76	Hex	10 mm	Standard	Black & Decker	89275A14	00000


							5.0, 7.5, 10.0, 13.0, 16.0, 19.0, 21.0, 23.0, 26.0, 29.0, 31.0, 33.0, 35.0	0.1968", 0.2953", 0.3937", 0.5118", 0.6299", 0.748", 0.8268", 0.9055", 1.0236", 1.1417", 1.2205", 1.2992", 1.378"	79	Hex	11.1 mm	Standard	Black & Decker	89275A15	00000
							6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0	0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087"	64	Hex	10 mm	Standard	Black & Decker	89275A13	00000

High-Speed Steel Drill Bits

Jobbers' Length

Round Shank

Jobbers' Length

Morse Taper Shank

Extended Length

Round Shank

Standard

Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				16.0	0.6299"	178	88	Round	16 mm	Standard	Dormer Pramet	2958A177	000000


				16.0	0.6299"	218	88	Morse Taper	Morse 2	Standard	Dormer Pramet	3070A164	000000


				Extended Length







								Black Oxide

								16.0	0.6299"	227	149	Round	16 mm	Standard	Dormer Pramet	88455A135	00000




										Uncoated

										16.0	0.6299"	227	117.2	Round	16 mm	Standard	Dormer Pramet	3083A212	00000

Reduced-Shank High-Speed Steel Drill Bits

Jobbers' Length

Standard

Split

Cut large holes with drill presses and portable drills that have a standard-size chuck. The shank on these bits has a smaller diameter than the cutting tip. High-speed steel is good for general purpose drilling in most metals. Also known as Silver and Deming bits.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				16.0	0.6299"	152	53.3	Reduced Round	1/2"	Standard	Republic Drill	3091A35	000000




						Black/Gold Oxide

						16.0	0.6299"	152	63.5	Reduced Round/3-Flat	1/2"	Split	Cle-Line	6154N17	00000

Reduced-Shank Cobalt Steel Drill Bits

Jobbers' Length

Split

More wear resistant than high-speed steel, these bits cut large holes with tools that have a standard-size chuck. The shank has a smaller diameter than the cutting tip and fits drill presses and portable drills. Cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials such as nickel. Also known as Silver and Deming bits.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				16.0	0.6299"	152	58	Reduced Round	1/2"	Split	Chicago-Latrobe	8939A607	000000

Chip-Clearing High-Speed Steel Drill Bits

Jobbers' Length

Parabolic Flute

Round Shank

Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				16.0	0.6299"	178	120	Parabolic	Round	16	Split	Dormer Pramet	2754A94	000000

Carbide-Tipped Drill Bits

Jobbers' Length

Round Shank

Standard

Split

Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				16.0	0.6299"	178	132	Round	16 mm	Standard	ICS	28595A17	0000000


				16.0	0.6299"	178	132	Round	16 mm	Split	ICS	28595A97	000000