7.0 mm Drill Bits | McMaster-Carr

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

					Shank				Each		Package
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each	Pkg. Qty.		Pkg.
Jobbers' Length







				Black Oxide

				7.0	0.2756"	109	55	Round	7 mm	Standard	Dormer Pramet	2958A116	00000	—	———	0




						Titanium Nitride (TiN) Coated

						7.0	0.2756"	109	55	Round	7 mm	Standard	Chicago-Latrobe	8950A21	00000	—	———	0




								Gold Oxide

								7.0	0.2756"	105	69.9	Round	7 mm	Split	Viking Norseman Drill	30565A294	0000	10	30565A441	000000




										Uncoated

										7.0	0.2756"	105	69.1	Round	7 mm	Standard	Viking Norseman Drill	2951A138	0000	—	———	0


										Short Length







														Black Oxide

														7.0	0.2756"	74	19.9	Round	7 mm	Split	Dormer Pramet	28255A49	0000	—	———	0




																Titanium Nitride (TiN) Coated

																7.0	0.2756"	73	33	Round	7 mm	Split	Dormer Pramet	2979N27	0000	—	———	0


																Extended Length







																				Black Oxide

																				7.0	0.2756"	200	135.9	Round	7 mm	Standard	Dormer Pramet	88455A68	00000	—	———	0




																				Uncoated

		7.0	0.2756"																	156	88.3	Round	7 mm	Standard	Dormer Pramet	3083A172	00000	—	———	0

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Short Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				7.0	0.2756"	110	69.1	Round	7 mm	Split	Dormer Pramet	5058N69	000000




						Titanium Aluminum Nitride (TiAlN) Coated

						7.0	0.2756"	109	58.5	Round	7 mm	Split	Guhring	2753A175	00000




								Gold Oxide

								7.0	0.2756"	109	55	Round	7 mm	Split	Dormer Pramet	29355A117	0000


								Short Length







												Titanium Nitride (TiN) Coated

												7.0	0.2756"	75	20.1	Round	7 mm	Split	Chicago-Latrobe	2456N157	00000




														Uncoated

														7.0	0.2756"	75	20.1	Round	7 mm	Split	Chicago-Latrobe	2456N129	0000

Carbide Drill Bits

The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.

Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length
Round Shank






				Titanium Nitride (TiN) Coated

				7.0	0.2756"	89	54	Round	7 mm	Four Facet	Ultra Tool	3030A84	000000




						Uncoated

						7.0	0.2756"	89	43.2	Round	7 mm	Four Facet	Ultra Tool	3030A34	00000


						Short Length
						Round Shank






										Titanium Nitride (TiN) Coated

										7.0	0.2756"	63	25	Round	7 mm	Four Facet	Ultra Tool	27515A719	00000




												Titanium Aluminum Nitride (TiAlN) Coated

												7.0	0.2756"	63	25	Round	7 mm	Four Facet	Ultra Tool	8879A619	00000




														Uncoated

														7.0	0.2756"	63	25	Round	7 mm	Four Facet	Ultra Tool	2956A819	00000

Drill Bit Size Gauges

For

Metric

Measure drill bit sizes with these gauges.

For System of Measurement	For Use With	For Drill Bit Size, mm	Wd.	Ht.	Thk.	Material	Color	Mounting Hole Dia.		Each
Metric	Drills	1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.25, 4.5, 4.75, 5.0, 5.25, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A64	000000

Carbide-Tipped Drill Bits

Jobbers' Length

Round Shank

Short Length

Round Shank

Extended Length

Round Shank


Standard	Split

Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				7.0	0.2756"	108	61	Round	7 mm	Standard	Izar	28595A71	000000


				7.0	0.2756"	108	73	Round	7 mm	Split	ICS	28595A29	00000


				Short Length







								Uncoated

								7.0	0.2756"	68	21	Round	7 mm	Standard	Izar	28805A409	00000


								Extended Length







												Uncoated

												7.0	0.2756"	159	83	Round	7 mm	Standard	ICS	29465A115	00000

Coolant-Fed Carbide Drill Bits


Jobbers' Length Round Shank	Maintenance Length Round Shank

The hardest and most wear-resistant bits, these deliver coolant to reduce heat and evacuate chips. They are designed for CNC machines that supply coolant through the spindle rather than an external source, such as a hose and nozzle. Coolant flows directly from holes in the bit's tip onto the drilling surface. This speeds up cuts and leads to excellent performance in deep holes and tough materials such as stainless steel and titanium.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Aluminum Nitride (TiAlN) Coated

				7.0	0.2756"	92	53.1	Round	8 mm	Four Facet	Garr Tool	2396N277	0000000


				Maintenance Length







								Titanium Aluminum Nitride (TiAlN) Coated

								7.0	0.2756"	79	34	Round	8 mm	Four Facet	Garr Tool	2396N679	00000

Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Jobbers' Length

Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Bit Style	Mfr.		Each
Jobbers' Length







				Diamond Coated

				7.0	0.2756"	89	54	Round	7	140°	Brad	Fluted	Ultra Tool	3162A64	000000

High-Speed Steel Drill Bits for Plastic

The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.

Jobbers' Length About Jobbers' Length

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Mfr.		Each
Uncoated



		7.0	0.2756"	109	72	Round	7	60°	Standard	ICS	27465A419	000000

High-Speed Steel Precise-Cut Drill Bits for Wood

Wear and heat resistant, these stay sharp longer than precise-cut bits made of plain steel. The sharp center point keeps the bit from wandering during drilling to cut accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

	Max. Drilling Dp., mm	Shank Size, mm	Drill Bit Point Type	Mfr.		Each
Uncoated







	Round Shank

	7.0	0.2756"	110	66	7	Brad	Stern	28205A75	000000

Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel

Jobbers' Length

Parabolic Flute

Round Shank

Split

Excellent for challenging metals such as stainless steel and nickel alloys, these bits cut aggressively and evacuate chips quickly. The grooved flutes prevent clogs and improve coolant flow to dissipate heat that can damage the bit or your material. Bits are made of tough and wear-resistant cobalt steel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Aluminum Nitride (TiAlN) Coated

				7.0	0.2756"	109	69	Parabolic	Round	7	Split	Guhring	3020A54	000000

Carbide-Tipped Drill Bits for Hardened Steel

Jobbers' Length

Round Shank

Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. A lower-priced alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				7.0	0.2756"	108	28	Round	7 mm	Notched	Izar	2973A66	000000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				7.0	0.2756"	108	67	Parabolic	Round	7	Split	Viking Norseman Drill	2771N58	000000

Chip-Clearing High-Speed Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				7.0	0.2756"	109	69	Parabolic	Round	7	Split	Dormer Pramet	7333N31	000000




						Uncoated

						7.0	0.2756"	109	55	Parabolic	Round	7	Split	Dormer Pramet	2754A34	0000

Depth-Limiting Drill Stops

Image of ProductInUse. Front orientation. Drill Stops.

Ensure identical hole depths every time. Position the collar on your bit and tighten the set screw.

	For Drill Bit Size Decimal Equiv.	Overall Lg.	OD	Hex Key Size for Set Screw	Material		Each
For Metric Drill Bits



	7.0 mm	0.2756"	5/8"	5/8"	3/32"	Steel	8865A188	00000

Left-Hand Cobalt Steel Drill Bits

Jobbers' Length

Round Shank

Split

The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-9	10-Up
Jobbers' Length







				Uncoated

				7.0	0.2756"	105	73	Round	7 mm	Split	Viking Norseman Drill	3474A61	000000	000000

Left-Hand High-Speed Steel Drill Bits

Jobbers' Length

Round Shank

Standard

With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-9	10-Up
Jobbers' Length







				Black Oxide

				7.0	0.2756"	109	59.9	Round	7 mm	Standard	Dormer Pramet	29855A65	000000	000000