7.2 mm Drill Bits | McMaster-Carr

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				7.2	0.2835"	109	54.6	Round	7.2 mm	Standard	Dormer Pramet	2958A118	00000




						Black/Gold Oxide

						7.2	0.2835"	108	71.4	Round	7.2 mm	Split	Viking Norseman Drill	30565A296	0000


						Short Length







										Black Oxide

										7.2	0.2835"	74	34	Round	7.2 mm	Split	Dormer Pramet	28255A121	0000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				7.2	0.2835"	109	67	Parabolic	Round	7.2	Split	Viking Norseman Drill	2771N771	000000

Hex-Bit Taps

You only need one tool to turn these taps and install screws. The _1/4" hex shank fits hand or powered screwdrivers for threading holes. Then switch to a screwdriver bit to finish the job. To tap in hard-to-reach spots, add a bit extension. Taps have straight flutes that are good for most jobs.

High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.

Uncoated—The economical choice, these won't last as long as coated taps.

Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.

						Drill Bit					Plug Chamfer
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	No. of Flutes	Size, mm	Decimal Size Equiv.	Shank Type	Hex Shank Size	Mfr.		Each
High-Speed Steel







				Uncoated

				M8 × 0.75 mm	3/4"	1 9/16"	Metric	4	7.2	0.2834"	Hex	1/4"	Volkel	1021N29	000000

Undersized Hardened Multipurpose M2 High-Speed Tool Steel Rods

These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Drill Bit Size, mm	Lg.	Yield Strength	Hardness	Mechanical Finish		Each
7.2	-0.005 to 0	7.2	4 1/4"	Not Rated	Rockwell C60 (Extra Hard)	Precision Ground	2900A349	00000