8.0 mm Drill Bits | McMaster-Carr

Drill multiple hole sizes using only one bit. These have steps with progressively larger diameters—the deeper they drill, the bigger the hole. Count the steps as you drill to achieve the proper size. These bits also deburr as they cut, so they're good for thin materials like sheet metal and plastic panels. Wear and heat resistant, high-speed steel is versatile for use on a range of materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

			Shank
Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Type	Size	Drill Bit Point Type	Mfr.		Each







			Black Oxide

			4.0, 5.0, 6.0, 6.5, 8.0, 9.0, 10.0, 11.0, 12.0	0.1575", 0.1969", 0.2362", 0.2559", 0.315", 0.3543", 0.3937", 0.4331", 0.4724"	65	Round/3-Flat	6.4 mm	Standard	Milwaukee	5910N19	000000


			4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874"	65	Round/3-Flat	6.4 mm	Standard	Milwaukee	5910N21	00000
			6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0, 22.0, 24.0, 26.0, 28.0, 30.0, 32.0, 35.0	0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661", 0.9449", 1.0236", 1.1024", 1.1811", 1.2598", 1.378"	89	Round/3-Flat	9.53 mm	Standard	Milwaukee	5910N22	000000




					Titanium Aluminum Nitride (TiAlN) Coated

					4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874"	76	Quick-Change Hex	6.35 mm	Standard	Milwaukee	89275A36	00000




							Uncoated

							4.0, 6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0, 20.0, 22.0	0.1575", 0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087", 0.7874", 0.8661"	76	Hex	10 mm	Standard	Black & Decker	89275A14	00000


							6.0, 8.0, 10.0, 12.0, 14.0, 16.0, 18.0	0.2362", 0.315", 0.3937", 0.4724", 0.5512", 0.6299", 0.7087"	64	Hex	10 mm	Standard	Black & Decker	89275A13	00000

High-Speed Steel Drill Bits

Jobbers' Length

Round Shank

Short Length

Round Shank

Extended Length

Round Shank


Split	Standard

Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank				Each		Package
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each	Pkg. Qty.		Pkg.
Jobbers' Length







				Black Oxide

				8.0	0.315"	117	59	Round	8 mm	Standard	Dormer Pramet	2958A127	00000	10	2958A231	000000




						Titanium Nitride (TiN) Coated

						8.0	0.315"	117	59	Round	8 mm	Standard	Chicago-Latrobe	8950A22	00000	—	———	0




								Uncoated

								8.0	0.315"	114	74.6	Round	8 mm	Standard	Viking Norseman Drill	2951A141	0000	—	———	0




										Black/Gold Oxide

										8.0	0.315"	114	79.8	Round	8 mm	Split	Viking Norseman Drill	30565A305	0000	5	30565A443	00000


										Short Length







														Black Oxide

														8.0	0.315"	79	20.9	Round	8 mm	Split	Dormer Pramet	28255A53	0000	—	———	0




																Titanium Nitride (TiN) Coated

																8.0	0.315"	79	38.1	Round	8 mm	Split	Dormer Pramet	2979N28	0000	—	———	0


																Extended Length







																				Black Oxide

																				8.0	0.315"	315	233.9	Round	8 mm	Standard	Dormer Pramet	88455A81	00000	—	———	0




																				Uncoated

		8.0	0.315"																	165	92.7	Round	8 mm	Standard	Dormer Pramet	3083A176	00000	—	———	0

Cobalt Steel Drill Bits

Jobbers' Length

Round Shank

Short Length

Round Shank

Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				8.0	0.315"	117	74.9	Round	8 mm	Split	Dormer Pramet	5058N71	000000




						Titanium Aluminum Nitride (TiAlN) Coated

						8.0	0.315"	117	63	Round	8 mm	Split	Guhring	2753A176	00000




								Uncoated

								8.0	0.315"	114	80.2	Round	8 mm	Split	Viking Norseman Drill	29355A132	00000


								Short Length







												Titanium Nitride (TiN) Coated

												8.0	0.315"	79	21.1	Round	8 mm	Split	Chicago-Latrobe	2456N158	00000




														Uncoated

														8.0	0.315"	79	21.1	Round	8 mm	Split	Chicago-Latrobe	2456N131	00000

Drill Bit Drawer Cabinets

Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents. They can be stacked up to three high.

					Overall
	Holds Drill Bit Sizes	For Drill Bit Length Class	No. of Compartments	No. of Drawers	Wd.	Dp.	Ht.	Material	Lock Type	No. of Keys Included	Features		Each
For Drill Bits







				For Metric Drill Bits

				1.0 mm to 13.0 mm	Jobbers, Maintenance, Short	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	—	2962A4	0000000


				0.35 mm to 13.0 mm	Jobbers, Maintenance, Short	138	4	26"	12"	12 1/2"	Steel	Keyed	2	Undivided bottom drawer for general storage	8922A44	000000

Carbide Drill Bits

The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.

Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length
Round Shank






				Titanium Nitride (TiN) Coated

				8.0	0.315"	95	60	Round	8 mm	Four Facet	Ultra Tool	3030A85	0000000




						Uncoated

						8.0	0.315"	95	48	Round	8 mm	Four Facet	Ultra Tool	3030A36	000000


						Short Length
						Round Shank






										Titanium Nitride (TiN) Coated

										8.0	0.315"	70	32	Round	8 mm	Four Facet	Ultra Tool	27515A722	00000




												Titanium Aluminum Nitride (TiAlN) Coated

												8.0	0.315"	70	32	Round	8 mm	Four Facet	Ultra Tool	8879A622	00000




														Uncoated

														8.0	0.315"	70	32	Round	8 mm	Four Facet	Ultra Tool	2956A822	00000

Drill Bit Size Gauges

For

Metric

Measure drill bit sizes with these gauges.

For System of Measurement	For Use With	For Drill Bit Size, mm	Wd.	Ht.	Thk.	Material	Color	Mounting Hole Dia.		Each
Metric	Drills	1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.25, 4.5, 4.75, 5.0, 5.25, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5	2 1/2"	6 1/2"	5/64"	Steel	Silver	1/8"	8986A64	000000

Carbide-Tipped Drill Bits

Jobbers' Length

Round Shank

Short Length

Round Shank

Extended Length

Round Shank


Split	Standard

Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				8.0	0.315"	114	66	Round	8 mm	Standard	Izar	28595A73	000000


				8.0	0.315"	114	81	Round	8 mm	Split	ICS	28595A32	00000


				Short Length







								Uncoated

								8.0	0.315"	71	24	Round	8 mm	Standard	Izar	28805A412	00000


								Extended Length







												Uncoated

												8.0	0.315"	162	86	Round	8 mm	Standard	ICS	29465A116	00000

High-Speed Steel Precise-Cut Drill Bits for Wood

Wear and heat resistant, these stay sharp longer than precise-cut bits made of plain steel. The sharp center point keeps the bit from wandering during drilling to cut accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

	Max. Drilling Dp., mm	Shank Size, mm	Drill Bit Point Type	Mfr.		Each
Uncoated







	Round Shank

	8.0	0.315"	115	75	8	Brad	Stern	28205A76	000000

High-Speed Steel Drill Bits for Plastic

The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.

Jobbers' Length

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Mfr.		Each
Uncoated



		8.0	0.315"	117	80	Round	8	60°	Standard	ICS	27465A422	000000

Coolant-Fed Carbide Drill Bits


Jobbers' Length Round Shank	Maintenance Length Round Shank

The hardest and most wear-resistant bits, these deliver coolant to reduce heat and evacuate chips. They are designed for CNC machines that supply coolant through the spindle rather than an external source, such as a hose and nozzle. Coolant flows directly from holes in the bit's tip onto the drilling surface. This speeds up cuts and leads to excellent performance in deep holes and tough materials such as stainless steel and titanium.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Aluminum Nitride (TiAlN) Coated

				8.0	0.315"	92	53.1	Round	8 mm	Four Facet	Garr Tool	2396N287	0000000


				Maintenance Length







								Titanium Aluminum Nitride (TiAlN) Coated

								8.0	0.315"	79	40.9	Round	8 mm	Four Facet	Garr Tool	2396N713	000000

Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Jobbers' Length

Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Bit Style	Mfr.		Each
Jobbers' Length







				Diamond Coated

				8.0	0.315"	95	60	Round	8	140°	Brad	Fluted	Ultra Tool	3162A66	0000000




						Uncoated

						8.0	0.315"	95	60	Round	8	140°	Brad	Fluted	Ultra Tool	2828A126	00000

Left-Hand Cobalt Steel Drill Bits

Jobbers' Length

Round Shank

Split

The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-4	5-Up
Jobbers' Length







				Uncoated

				8.0	0.315"	114	81	Round	8 mm	Split	Viking Norseman Drill	3474A63	000000	000000

Carbide Drill Bits for Hardened Steel

Short Length

Round Shank

Split

The hardest and most wear-resistant bits with the longest life. Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. Carbide stays sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Short Length







				Uncoated

				8.0	0.315"	63	25.6	Round	8 mm	Split	Ultra Tool	8842A56	000000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				8.0	0.315"	117	73	Parabolic	Round	8	Split	Viking Norseman Drill	2771N59	000000

Depth-Limiting Drill Stops

Image of ProductInUse. Front orientation. Drill Stops.

Ensure identical hole depths every time. Position the collar on your bit and tighten the set screw.

	For Drill Bit Size Decimal Equiv.	Overall Lg.	OD	Hex Key Size for Set Screw	Material		Each
For Metric Drill Bits



	8.0 mm	0.3150"	3/4"	3/4"	3/32"	Steel	8865A199	00000

Left-Hand High-Speed Steel Drill Bits

Jobbers' Length

Round Shank

Standard

With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-9	10-Up
Jobbers' Length







				Black Oxide

				8.0	0.315"	117	64.6	Round	8 mm	Standard	Dormer Pramet	29855A67	000000	000000

Hole-Starting Cobalt Steel Drill Bits

120° Point Angle

Standard

Create an accurate starting place in your workpiece. Cut an indent with these bits, then continue drilling with a longer bit. The indent prevents slipping so the final hole is centered and precise. Cobalt steel resists wear to stay sharp when cutting hard materials, such as nickel. Also known as spotting drill bits.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank				90° Point Angle
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Short Length







				Uncoated

				8.0	0.315"	79	25.4	Round	8	Standard	Magafor	27445A92	000000

Chip-Clearing High-Speed Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				8.0	0.315"	117	75	Parabolic	Round	8	Split	Dormer Pramet	7333N33	000000




						Uncoated

						8.0	0.315"	117	59	Parabolic	Round	8	Split	Dormer Pramet	2754A36	00000

Carbide-Tipped Drill Bits for Hardened Steel

Jobbers' Length

Round Shank

Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. A lower-priced alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				8.0	0.315"	114	32	Round	8 mm	Notched	Izar	2973A68	000000

Carbide Drill Bits for Port Counterbores

With multiple cutting edges, these drill bits rough out port holes to the right shape for your counterbore to finish. An internal channel delivers coolant as you cut to reduce heat and flush out chips. Use these bits with CNC machines that supply coolant through the spindle. Made of carbide, they resist wear to prepare holes that are clean and accurate over time. They’re also coated with aluminum titanium nitride (AlTiN) to further reduce heat while you cut, which extends their life. Also known as step drills.

To finish the hole to size, you’ll need a port counterbore (sold separately). Add a thread mill (sold separately) to complete the hole with threads.

Short Length—The most rigid bits for drilling the straightest holes.

	Drill Bits												Port Counterbores		Thread Mills
					Shank
	For Thread Size	For Port Dash Size	Decimal Size Equiv.	Overall Lg., mm	Type	Size, mm	Drill Bit Point Type	Finish	Mil. Spec.	Mfr.		Each		Each		Each
Short Length







				SAE J1926/1

				5/16"-28	02	0.255"	79	Round	8	Four Facet	Aluminum Titanium Nitride (AlTiN) Coated	MS16142	Scientific Cutting Tools	9851N11	0000000	9869N17	0000000	5277N24	0000000




						SAE AS5202

						5/16"-28	02	0.26"	79	Round	8	Four Facet	Aluminum Titanium Nitride (AlTiN) Coated	MS33649	Scientific Cutting Tools	9851N21	000000	9869N28	000000	5277N24	000000