These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.

Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need. Use the graduations to set the jig to the centerline of your workpiece.

An iconic rubberized grip ensures comfort and control as you turn screws and nuts. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to fasten nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.

Fasten differently sized screws with these sets. They save you the effort of switching three separate bits in and out of a power tool, instead letting you flip between a countersinking drill and a screwdriver bit with a single hand. You can also attach your own countersinking drills and screwdriver bits as long as they have a _1/4” hex shank.

Countersinking drills have an 82° angle, allowing inch-sized flat- and oval-head screws to sit flush with the surface.

This pouch fits onto most hand-held power drills and impact drivers. It has a magnetic panel on the front that can hold bits and fasteners for easy access.

A traditional pistol-grip shape makes these drills suitable for a variety of drilling applications. They have a variable speed motor—the further you depress the trigger, the faster the drill rotates.

A traditional pistol-grip shape makes these drills suitable for a variety of drilling applications. They have a variable speed motor—the further you depress the trigger, the faster the drill rotates.

Safely test for live circuits before driving screws and nuts. A detector snaps in and out of the handle of these screwdriver/nutdrivers to check for voltage without touching live wires. Light and sound indicators alert you when over 50 volts AC is detected. These tools come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 10-in-1 drivers.

Adapt your power screwdriver, impact driver, or other hex-shank drive tool into a drill. These chucks have a _1/4" hex shank that slots into your tool’s hex drive. They’re also known as adapt-a-drive chucks.

A ratchet mechanism makes this drill great for use in confined areas. The three-jaw chuck provides a secure fit for driving round shank drills, hex shank tools, and auger bits. Good for use on wood that is prone to splintering.

Just twist the collar ring and this tool will change from a standard electric drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates.

Turn screws and nuts with a single tool. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Also known as a SDS-Plus rotary hammer, this model is lightweight and ideal for overhead work and drilling smaller holes. Use with SDS-Plus drill bits . Note: SDS-Plus and SDS-Max bits are not interchangeable.

Use the rotary-only mode for general purpose drilling and driving fasteners (requires a chuck adapter or a magnetic bit holder). In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. In the percussion-only mode, the tool provides only the hammering action. Use this mode when working with chisels and other masonry tools (see Chisels for Rotary Hammers).

With a hollow body and single cutting edge, these countersinks make less contact with the hole than solid-body countersinks. The reduced friction minimizes vibration and leaves a more accurate, tight-fitting recess for your screw head.