16mm Shank Size Drill Bits

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				16.0	0.6299"	178	88	Round	16 mm	Standard	Dormer Pramet	2958A177	000000


				Extended Length







								Black Oxide

								16.0	0.6299"	227	149	Round	16 mm	Standard	Dormer Pramet	88455A135	00000




										Uncoated

										16.0	0.6299"	227	117.2	Round	16 mm	Standard	Dormer Pramet	3083A212	00000

High-Speed Steel Drill Bits for Plastic

The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.

Jobbers' Length About Jobbers' Length

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Mfr.		Each
Uncoated



		16	0.6299"	178	120	Round	16	60°	Standard	ICS	27465A439	000000

Carbide-Tipped Drill Bits

Jobbers' Length

Round Shank

Split

Standard

Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				16.0	0.6299"	178	132	Round	16 mm	Standard	ICS	28595A17	0000000


				16.0	0.6299"	178	132	Round	16 mm	Split	ICS	28595A97	000000

Chip-Clearing High-Speed Steel Drill Bits

Jobbers' Length

Parabolic Flute

Round Shank

Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				16.0	0.6299"	178	120	Parabolic	Round	16	Split	Dormer Pramet	2754A94	000000

Reamers

Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.

Square Shank

Spiral Flute

Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).

Spiral Flute—Since these reamers clear chips better than straight flutes, they leave holes with a smoother finish. They're better for holes with breaks in the surface, such as a keyway, because they cut continuously across the breaks instead of moving in and out.

High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.

Left-Hand Spiral—These reamers push chips downward as they cut, so they're often used in through holes.

				Lg., mm
	Reamer Dia.	Material	Square Shank Size, mm	Flute	Overall	No. of Flutes	Spiral Direction	Cutting Dia. Tolerance, mm	Specs. Met	For Use On	Mfr.		Each
Spiral Flute







				Metric

				20.0000 mm	High-Speed Steel	16	100	201	8	Left Hand	0.009 to 0.017	DIN 206	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Dormer Pramet	2822A59	0000000