4mm Shank Size Drill Bits

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank				Each		Package
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each	Pkg. Qty.		Pkg.
Jobbers' Length







				Black Oxide

				4.0	0.1575"	75	35	Round	4 mm	Standard	Dormer Pramet	2958A72	00000	10	2958A722	000000




						Titanium Nitride (TiN) Coated

						4.0	0.1575"	75	37	Round	4 mm	Standard	Chicago-Latrobe	8950A15	0000	—	———	0




								Uncoated

								4.0	0.1575"	83	42.9	Round	4 mm	Standard	Viking Norseman Drill	2951A132	0000	—	———	0




										Black/Gold Oxide

										4.0	0.1575"	83	49.2	Round	4 mm	Split	Viking Norseman Drill	30565A261	0000	10	30565A429	00000


										Short Length







														Black Oxide

														4.0	0.1575"	55	13.9	Round	4 mm	Split	Dormer Pramet	28255A33	0000	—	———	0




																Titanium Nitride (TiN) Coated

																4.0	0.1575"	56	22.1	Round	4 mm	Split	Dormer Pramet	2979N19	0000	—	———	0


																Extended Length







																				Black Oxide

																				4.0	0.1575"	160	91.9	Round	4 mm	Standard	Dormer Pramet	88455A42	00000	—	———	0


4.0	0.1575"																			200	141.9	Round	4 mm	Standard	Dormer Pramet	88455A62	00000	—	———	0
4.0	0.1575"																			315	241.9	Round	4 mm	Standard	Dormer Pramet	88455A72	00000	—	———	0




		Uncoated

		4.0	0.1575"																	119	69.7	Round	4 mm	Standard	Dormer Pramet	3083A144	0000	—	———	0

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Short Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				4.0	0.1575"	75	42.9	Round	4 mm	Split	Dormer Pramet	5058N61	00000




						Titanium Aluminum Nitride (TiAlN) Coated

						4.0	0.1575"	75	37	Round	4 mm	Split	Guhring	2753A167	00000




								Gold Oxide

								4.0	0.1575"	75	35	Round	4 mm	Split	Dormer Pramet	29355A64	0000


								Short Length







												Titanium Nitride (TiN) Coated

												4.0	0.1575"	56	14	Round	4 mm	Split	Chicago-Latrobe	2456N148	0000




														Uncoated

														4.0	0.1575"	56	14	Round	4 mm	Split	Chicago-Latrobe	2456N121	0000

Carbide Drill Bits

The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.

Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length
Round Shank






				Titanium Nitride (TiN) Coated

				4.0	0.1575"	63	35	Round	4 mm	Four Facet	Ultra Tool	3030A78	000000




						Uncoated

						4.0	0.1575"	63	28	Round	4 mm	Four Facet	Ultra Tool	3030A27	00000


						Short Length
						Round Shank






										Titanium Nitride (TiN) Coated

										4.0	0.1575"	63	19	Round	4 mm	Four Facet	Ultra Tool	27515A713	00000




												Titanium Aluminum Nitride (TiAlN) Coated

												4.0	0.1575"	63	19	Round	4 mm	Four Facet	Ultra Tool	8879A613	00000




														Uncoated

														4.0	0.1575"	63	19	Round	4 mm	Four Facet	Ultra Tool	2956A813	00000

Left-Hand Cobalt Steel Drill Bits

Jobbers' Length

Round Shank

Split

The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-9	10-Up
Jobbers' Length







				Uncoated

				4.0	0.1575"	83	54	Round	4 mm	Split	Viking Norseman Drill	3474A54	000000	000000

High-Speed Steel Drill Bits for Plastic

The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.

Jobbers' Length About Jobbers' Length

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Mfr.		Each
Uncoated



		4.0	0.1575"	75	43	Round	4	60°	Standard	ICS	27465A413	00000

Carbide-Tipped Drill Bits

Jobbers' Length

Round Shank

Short Length

Round Shank


Split	Standard

Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Short Length—The most rigid bits for drilling the straightest holes.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				4.0	0.1575"	79	41.9	Round	4 mm	Standard	Izar	28595A51	000000


				4.0	0.1575"	79	54	Round	4 mm	Split	ICS	28595A22	00000


				Short Length







								Uncoated

								4.0	0.1575"	52	12	Round	4 mm	Standard	Izar	28805A403	00000

Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Jobbers' Length

Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Point Angle	Drill Bit Point Type	Bit Style	Mfr.		Each
Jobbers' Length







				Diamond Coated

				4.0	0.1575"	63	35	Round	4	140°	Brad	Fluted	Ultra Tool	3162A57	000000




						Uncoated

						4.0	0.1575"	63	35	Round	4	140°	Brad	Fluted	Ultra Tool	2828A117	00000

Hole-Starting Cobalt Steel Drill Bits


120° Point Angle	Standard

Create an accurate starting place in your workpiece. Cut an indent with these bits, then continue drilling with a longer bit. The indent prevents slipping so the final hole is centered and precise. Cobalt steel resists wear to stay sharp when cutting hard materials, such as nickel. Also known as spotting drill bits.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

					Shank				90° Point Angle		120° Point Angle
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size, mm	Drill Bit Point Type	Mfr.		Each		Each
Short Length







				Uncoated

				4.0	0.1575"	52	12.7	Round	4	Standard	Magafor	27445A15	000000	27445A25	000000

Strong-Hold Bit Adapters

Quick-Change Chuck

for HIOS Bit Shank

Lock your bit into the adapter to prevent accidental disengagement. Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers. These adapters have a groove in the shank to fit in a power-tool chuck.

Quick-Change Chuck—Adapters that have nonmagnetic bit holders won’t attract loose metal parts and shavings. To secure a bit in adapters with quick-change chuck, pull back on the chuck to insert the bit and then push it forward to lock the bit place.

	For Bit Shank Type	For Bit HIOS Shank Size, mm	For Bit Half Moon Shank Size, mm	Overall Lg.	Material		Each
Quick-Change Chuck



	1/4"	HIOS, Half Moon	4	4	2"	Steel	7225A78	000000

Carbide Drill Bits for Hardened Steel

Short Length

Round Shank

Split

The hardest and most wear-resistant bits with the longest life. Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. Carbide stays sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Short Length







				Uncoated

				4.0	0.1575"	63	15.2	Round	4 mm	Split	Ultra Tool	8842A47	000000

Left-Hand High-Speed Steel Drill Bits

Jobbers' Length

Round Shank

Standard

With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

					Shank					Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		1-9	10-Up
Jobbers' Length







				Black Oxide

				4.0	0.1575"	75	35	Round	4 mm	Standard	Dormer Pramet	29855A56	00000	00000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				4.0	0.1575"	76	41	Parabolic	Round	4	Split	Viking Norseman Drill	2771N49	00000

Smooth-Finish Carbide Drill Bits


Jobbers' Length Round Shank	Split

With more cutting edges than other drill bits, these cut continuously and consistently for a smoother finish. They also stay centered to produce holes that are straighter and more accurate. However, since there’s less space between the cutting edges, they don’t clear chips as quickly. Made of carbide, these are the hardest and most wear-resistant drill bits you can buy. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				4.0	0.1575"	55	21.9	Round	4 mm	Split	Kyocera	2783A2	000000

Hex Bits

Hex Shank

With six contact points, these bits handle more torque than slotted and Phillips bits without slipping and stripping the drive.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Steel—Best for dry environments, since moisture will cause these bits to rust.

		Each
For Hand Tools







	4 mm Hex Shank Size

	0.028"	1"	Steel	8526A21	00000


	0.035"	1"	Steel	8526A22	0000
	0.050"	1"	Steel	8526A23	0000
	1/16"	1 1/8"	Steel	8526A11	0000
	5/64"	1 1/8"	Steel	8526A12	0000
	3/32"	1 1/8"	Steel	8526A13	0000
	7/64"	1 1/8"	Steel	8526A14	0000
	1/8"	1 1/8"	Steel	8526A15	0000
	9/64"	1 1/8"	Steel	8526A16	0000
	5/32"	1 1/8"	Steel	8526A17	0000
	0.71 mm	1 1/8"	Steel	7389A11	0000


	0.89 mm	1 1/8"	Steel	7389A12	0000
	1.27 mm	1 1/8"	Steel	7389A13	0000
	1.5 mm	1 1/8"	Steel	7389A14	0000
	2 mm	1 1/8"	Steel	7389A15	0000
	2.5 mm	1 1/8"	Steel	7389A16	0000
	3 mm	1 1/8"	Steel	7389A17	0000
	4 mm	1 1/8"	Steel	7389A18	0000

Carbide Drill Bits for Sheet Metal


Short Length Round Shank	Standard

The hardest and most wear-resistant bits for sheet metal and thin-wall tubing. They have short flutes that make shallow cuts without snagging and deforming the material. Carbide stays sharp at high temperatures and faster speeds than high-speed steel. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Short Length—The most rigid bits for drilling the straightest holes.

Uncoated—Excellent for a range of materials but won't last as long as coated bits.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	No. of Drilling Ends	Mfr.		Each
Short Length







				Uncoated

				4.0	0.1575"	50	8	Round	4 mm	Standard	1	Ultra Tool	8769A42	000000

Chip-Clearing High-Speed Steel Drill Bits

Jobbers' Length

High Helix Flute

Round Shank

Jobbers' Length

Parabolic Flute

Round Shank

Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

High Helix Flute—Less aggressive than parabolic flutes for cleaner cuts in soft metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				4.0	0.1575"	75	35	High Helix	Round	4	Split	Dormer Pramet	30055A59	00000




						Titanium Nitride (TiN) Coated

						4.0	0.1575"	75	43	Parabolic	Round	4	Split	Dormer Pramet	7333N22	0000




								Uncoated

								4.0	0.1575"	75	35	Parabolic	Round	4	Split	Dormer Pramet	2754A26	0000

Phillips Bits

Hex Shank

One of the most common drive styles for good reason. Phillips bits align easily with fasteners and deliver more torque than slotted bits.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Material		Each
For Hand Tools







	4 mm Hex Shank Size

	No. 000	No. 000	1 1/8"	Steel	5750A44	00000


	No. 00	No. 00	1 1/8"	Steel	5750A45	0000
	No. 0	No. 0, No. 1	1 1/8"	Steel	5750A46	0000
	No. 1	No. 2, No. 3, No. 4	1 1/8"	Steel	5750A47	0000
	No. 2	No. 5, No. 6, No. 7, No. 8, No. 9, No. 10	1"	Steel	5750A99	0000

Slotted Bits

Hex Shank

A straightforward choice for small-scale jobs. These versatile bits handle everything from installing outlet covers and switch plates to fastening screws in sheet metal. However, since they only have two points of contact, they may slip out of the fastener head if you use too much force.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Material		Each
For Hand Tools







	4 mm Hex Shank Size

	0.032"	No. 000	1 1/8"	Steel	5750A371	00000


	0.048"	No. 00	1 1/8"	Steel	5750A372	0000
	0.060"	No. 0	1 1/8"	Steel	5750A373	0000
	0.071"	No. 1	1 1/8"	Steel	5750A374	0000
	0.079"	No. 2	1 1/8"	Steel	5750A375	0000
	0.099"	No. 3	1 1/8"	Steel	5750A376	0000
	0.119"	No. 4	1 1/8"	Steel	5750A377	0000
	0.138"	No. 5	1 1/8"	Steel	5750A378	0000
	0.158"	No. 6	1 1/8"	Steel	5750A379	0000

Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel

Jobbers' Length

Parabolic Flute

Round Shank

Split

Excellent for challenging metals such as stainless steel and nickel alloys, these bits cut aggressively and evacuate chips quickly. The grooved flutes prevent clogs and improve coolant flow to dissipate heat that can damage the bit or your material. Bits are made of tough and wear-resistant cobalt steel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Aluminum Nitride (TiAlN) Coated

				4.0	0.1575"	75	43	Parabolic	Round	4	Split	Guhring	3020A43	000000

Bit Adapters

Ball-Detent Bit

Holder

Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers. These adapters have a groove in the shank to fit in a power-tool chuck.

	For Bit Shank Type	For Bit Hex Shank Size, mm	Overall Lg.	Material		Each
Ball-Detent Bit Holder



	1/4"	Hex	4	2 3/8"	Steel	7225A75	00000

Bit Adapters for Bit Screwdrivers

Use a 4 mm bit in a bit driver that's designed for _1/4" bits.

	For Bit Shank Type	For Bit Hex Shank Size, mm	Overall Lg.	Material		Each
Magnet Bit Holder



	1/4"	Hex	4	1"	Steel	2587N12	00000

Microstix Bits

Turn Microstix screws, frequently found on old computers, cell phones, and other electronics.

Half-Moon Shank—Also known as insert bits, these snap into hand tools that accept 4 mm half-moon shanks. To fit these bits in a 1/4" hex shank driver, use an adapter (sold separately).

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Screwdriver Bits					1/4" Hex Shank Size Bit Adapters
	Drive Size	Overall Lg.	Material		Each		Each
For Hand Tools







				4 mm Half-Moon Shank Size

				No. 1	1 11/16"	Steel	2777N16	000000	7225A78	000000

Pentalobe Bits

Turn pentalobe screws found on Apple devices and other electronics. Their unique five-lobe shape delivers high torque without slipping and damaging the drive.

Hex Shank—Also known as insert bits, these snap into hand tools that accept a 4 mm hex shank. To fit them into a 1/4" hex shank driver, you'll need an adapter (sold separately).

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Screwdriver Bits					1/4" Hex Shank Size Bit Adapters
	Drive Size	Overall Lg.	Material		Each		Each
For Hand Tools







				4 mm Hex Shank Size

				PL1	1 1/8"	Steel	1533N1	00000	7225A75	00000


				PL2	1 1/8"	Steel	1533N2	0000	7225A75	0000
				PL3	1 1/8"	Steel	1533N3	0000	7225A75	0000
				PL4	1 1/8"	Steel	1533N4	0000	7225A75	0000
				PL5	1 1/8"	Steel	1533N5	0000	7225A75	0000
				PL6	1 1/8"	Steel	1533N6	0000	7225A75	0000

Torx Bits

Hex Shank

Get a grip with less slip. These bits have a six-lobe shape that grips fasteners so they won't slip and damage the drive. Also known as star bits.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Steel—Best for dry environments, since moisture will cause these bits to rust.

		Each
For Hand Tools







	4 mm Hex Shank Size

	T3	1 1/8"	Steel	7013A61	00000


	T4	1 1/8"	Steel	7013A62	0000
	T5	1 1/8"	Steel	7013A63	0000
	T6	1 1/8"	Steel	7013A64	0000
	T7	1 1/8"	Steel	7013A65	0000
	T8	1 1/8"	Steel	7013A66	0000
	T9	1 1/8"	Steel	7013A67	0000
	T10	1 1/8"	Steel	7013A68	0000
	T15	1 1/8"	Steel	7013A69	0000
	T20	1 1/8"	Steel	7013A71	0000