6.3mm Shank Size Drill Bits

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Black Oxide

				6.3	0.248"	101	50.4	Round	6.3 mm	Standard	Dormer Pramet	2958A97	00000




						Black/Gold Oxide

						6.3	0.248"	102	66.7	Round	6.3 mm	Split	Viking Norseman Drill	30565A286	0000


						Extended Length







										Black Oxide

										6.3	0.248"	148	97	Round	6.3 mm	Standard	Dormer Pramet	88455A122	00000

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				6.3	0.248"	101	63	Round	6.3 mm	Split	Dormer Pramet	5058N135	000000




						Gold Oxide

						6.3	0.248"	101	50.4	Round	6.3 mm	Split	Dormer Pramet	29355A96	0000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				6.3	0.248"	101	61	Parabolic	Round	6.3	Split	Viking Norseman Drill	2771N765	00000

Reamers for Taper-Pin Holes

Shape holes to match the profile of taper pins. After drilling a hole that matches the size of the small end of the taper pin you want to install, use these reamers to taper and finish the hole.

Square Shank

Straight Flute

Turn these reamers by hand with an adjustable wrench, straight-handle tap wrench, or pin vise (sold separately).

Straight Flute—The most common flute style, these reamers are suitable for a wide range of applications, but not recommended for holes with a keyway or other breaks in the surface.

High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.

						Lg., mm
	For Taper Pin No.	Reamer Dia. (A), mm	Reamer Dia. (B), mm	Material	Square Shank Size, mm	Flute	Overall	No. of Flutes	Cutting Dia. Tolerance, mm	Rate of Taper	For Use On	Mfr.		Each
Straight Flute







				Metric

				6 mm	8.0000	5.9000	High-Speed Steel	6.3	105	135	6	0 to 0.125	1:50	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	Dormer Pramet	30165A66	0000000