6.9mm Shank Size Drill Bits

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank				Each
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		1-9	10-Up
Jobbers' Length





				Gold Oxide

				6.9	0.2717"	105	69.9	Round	6.9 mm	Split	30565A293	00000	00000


				Short Length





								Black Oxide

								6.9	0.2717"	74	34	Round	6.9 mm	Split	28255A119	0000	0000

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type		Each
Jobbers' Length





				Titanium Nitride (TiN) Coated

				6.9	0.2717"	109	69	Round	6.9 mm	Split	5058N136	000000




						Titanium Aluminum Nitride (TiAlN) Coated

						6.9	0.2717"	109	69	Round	6.9 mm	Split	5058N147	00000




								Gold Oxide

								6.9	0.2717"	109	55.2	Round	6.9 mm	Split	29355A116	0000