McMaster-Carr logo
    Filter by
    System of Measurement
    Drill Bit Size
    Industrial Info Compare
    Attribute Image
    Shank Type
    Industrial Info Compare
    Decimal Size Equivalent
    Industrial Info Compare
    Flute Direction
    Shank Size
    Attribute Image
    Sold As
    Number of Flutes
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Screw Size
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    84 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Maintenance Length, 3-Flat Shank, Round Shank.

    Maintenance Length

    Round Shank

    3-Flat Shank

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.
    Shank
    Each
    Package
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Pkg.
    Qty.
    Pkg.
    Jobbers' Length
     
    Black Oxide
    7/32"
    		0.2188"
    		3 3/4"2.17"Round
    		7/32"Split
    		Chicago-Latrobe2901A12200000122901A514000000
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 3/4"2.17"Round
    		7/32"Split
    		Chicago-Latrobe29115A72200001229115A82200000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3 3/4"2.17"Round
    		7/32"Split
    		Chicago-Latrobe3202A550000123202A3500000
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2.17"Round
    		7/32"Standard
    		Viking Norseman Drill8870A250000128870A12500000
     
    Short Length
     
    Black Oxide
    7/32"
    		0.2188"
    		2 3/8"0.92"Round
    		7/32"Split
    		Chicago-Latrobe2896A230000122896A16300000
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		2 3/8"0.92"Round
    		7/32"Split
    		Viking Norseman Drill2908A42000062908A200000
     
    Uncoated
    7/32"
    		0.2188"
    		2 3/8"0.92"Round
    		7/32"Standard
    		Chicago-Latrobe8947A1220000————0
     
    Maintenance Length
     
    Black/Gold Oxide
    7/32"
    		0.2188"
    		3 1/4"1.87"Round/3-Flat
    		7/32"Split
    		Viking Norseman Drill87755A3200001287755A1200000
     
    Extended Length
     
    Black Oxide
    7/32"
    		0.2188"
    		6"3.29"Round
    		7/32"Standard
    		Chicago-Latrobe29315A1310000————0
    7/32"
    		0.2188"
    		18"12"Round
    		7/32"Standard
    		Republic Drill2955A1300000————0
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		6"3.63"Round
    		7/32"Standard
    		Dormer Pramet28965A73700000————0
     
    Uncoated
    7/32"
    		0.2188"
    		6"3.63"Round
    		7/32"Standard
    		Dormer Pramet2939A7100000————0
    7/32"
    		0.2188"
    		8"5.56"Round
    		7/32"Standard
    		Dormer Pramet29515A6400000————0
    7/32"
    		0.2188"
    		12"8.56"Round
    		7/32"Standard
    		Dormer Pramet2939A1700000————0
     

    Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Hex Shank.

    Jobbers' Length

    Hex Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Package
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Pkg.
    Qty.
    Pkg.
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 3/4"2.5"Round
    		7/32"Split
    		Dormer Pramet27995A522000000————0
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3 5/8"1.92"Round
    		7/32"Split
    		Guhring2753A13400000————0
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"1.64"Hex
    		7/32"Split
    		Cle-Line4909N130000————0
    7/32"
    		0.2188"
    		3 3/4"2.06"Round
    		7/32"Split
    		Chicago-Latrobe3069A230000————0
     
    Short Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		2 3/8"0.92"Round
    		7/32"Split
    		Chicago-Latrobe2416A2200000————0
     
    Uncoated
    7/32"
    		0.2188"
    		2 3/8"0.92"Round
    		7/32"Split
    		Chicago-Latrobe28765A2200001228765A143000000
     
    Extended Length
     
    Uncoated
    7/32"
    		0.2188"
    		6"3.18"Round
    		7/32"Split
    		Dormer Pramet3063A12200000————0
     

    Carbide Drill Bits

    The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Mfr.
    Each
    Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Jobbers' Length, Round Shank.

    Round Shank

     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"Four Facet
    		Ultra Tool27515A45000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"Four Facet
    		Ultra Tool8879A6500000
     
    Uncoated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"Four Facet
    		Ultra Tool2956A2200000
     
    Short Length
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Short Length, Round Shank.

    Round Shank

     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"Four Facet
    		Ultra Tool27515A1500000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"Four Facet
    		Ultra Tool8879A2700000
     
    Uncoated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"Four Facet
    		Ultra Tool2956A4600000
     

    Left-Hand Cobalt Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand Cobalt Steel Drill Bits, Maintenance Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Maintenance Length

    Round Shank

    Split

    The flutes spiral in the opposite direction of other bits and stay sharp longer than high-speed steel. They’re primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    1-11
    12-Up
    Maintenance Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 1/8"1.42"Round
    		7/32"Split
    		Cle-Line3474A340000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3 1/4"1.42"Round
    		7/32"Split
    		Cle-Line3474A44000000000
     
    Uncoated
    7/32"
    		0.2188"
    		3 1/8"1.42"Round
    		7/32"Split
    		Cle-Line3474A1600000000
     

    Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2"Round
    		7/32"Standard
    		ICS2940A19000000
    7/32"
    		0.2188"
    		3 3/4"2"Round
    		7/32"Split
    		ICS31575A1500000
     
    Short Length
     
    Uncoated
    7/32"
    		0.2188"
    		2 3/8"0.63"Round
    		7/32"Standard
    		Izar28805A21700000
    7/32"
    		0.2188"
    		2 3/8"0.63"Round
    		7/32"Split
    		Izar2750A1700000
     
    Extended Length
     
    Uncoated
    7/32"
    		0.2188"
    		6"3.08"Round
    		7/32"Standard
    		ICS29465A1700000
     

    High-Speed Steel Drill Bits for Plastic

    The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Plastic, Jobbers' Length.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Mfr.
    Each
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2.5"Round
    		7/32"60°Standard
    		Onsrud27465A54000000
     

    Left-Hand High-Speed Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Gold Oxide
    7/32"
    		0.2188"
    		3 3/4"2.47"Round
    		7/32"Split
    		ICS88055A64000000
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2.06"Round
    		7/32"Split
    		ICS2876A2410000
     

    Carbide-Tipped Drill Bits for Glass and Ceramic

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Glass and Ceramic, Spear Bit.

    Spear Bit

    The spear-shaped point grinds away glass and ceramic at a slow speed, reducing the chance of chipping and cracking. These bits are carbide-tipped steel, which is extremely hard and wear resistant to maintain a sharp edge cut after cut. Drilling requires a coolant, such as water.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Spear Bit
     
    Carbide Tipped/Uncoated
    5/16"
    		0.3125"
    		3"1"Round
    		7/32"Standard
    		Tru-Cut2954A400000
     

    Chip-Clearing High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, High Helix Flute, Round Shank.
    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    High Helix Flute

    Round Shank

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Extended Length, Parabolic Flute, Round Shank.

    Extended Length

    Parabolic Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.
    High Helix Flute—Less aggressive than parabolic flutes for cleaner cuts in soft metals.
    Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Black Oxide
    7/32"
    		0.2188"
    		3 5/8"1.81"High HelixRound
    		7/32"Split
    		Dormer Pramet31115A5200000
    7/32"
    		0.2188"
    		3 3/4"2.06"ParabolicRound
    		7/32"Split
    		Chicago-Latrobe29925A220000
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 3/4"2.06"ParabolicRound
    		7/32"Split
    		Chicago-Latrobe29925A620000
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2.06"ParabolicRound
    		7/32"Split
    		Dormer Pramet2754A520000
    7/32"
    		0.2188"
    		3 3/4"2.17"High HelixRound
    		7/32"Standard
    		Chicago-Latrobe2912A1220000
     
    Extended Length
     
    Uncoated
    7/32"
    		0.2188"
    		8"5.56"ParabolicRound
    		7/32"Split
    		Dormer Pramet29745A3700000
    7/32"
    		0.2188"
    		12"8.56"ParabolicRound
    		7/32"Split
    		Dormer Pramet29745A6700000
     

    Carbide Drill Bits for Hardened Steel

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Hardened Steel, Short Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Short Length

    Round Shank

    Split

    The hardest and most wear-resistant bits with the longest life. Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. Carbide stays sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Mfr.
    Each
    Short Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"Split
    		Ultra Tool8882A22000000
     
    Uncoated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"Four Facet
    		Ultra Tool8944A2200000
     

    Short-Flute High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute High-Speed Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    The rigidity of short-length bits without sacrificing reach. The shallow drilling depth makes these less likely to wobble than other bits of the same length, so they stay centered and drill straighter. High-speed steel is good for general purpose drilling in most metals.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Extended Length
     
    Black Oxide
    7/32"
    		0.2188"
    		6"2.2"Round
    		7/32"Split
    		Chicago-Latrobe2986A2300000
    7/32"
    		0.2188"
    		12"2.2"Round
    		7/32"Split
    		Chicago-Latrobe2986A5700000
     

    Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

    Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Bit
    Style
    Mfr.
    Each
    Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite, Jobbers' Length.
     
    Diamond Coated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"118°Split
    		FlutedUltra Tool3162A26000000
     
    Uncoated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"140°Brad
    		FlutedUltra Tool2828A6900000
     
    Short Length
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite, Short Length.
     
    Diamond Coated
    7/32"
    		0.2188"
    		2 1/2"0.8"Round
    		7/32"118°Split
    		FlutedUltra Tool3162A2500000
     

    Short-Flute Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Extended Length, Round Shank.

    Extended Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    These bits combine the toughness and wear resistance of cobalt with short flutes for rigidity. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter. Cobalt lasts at least twice as long as high-speed steel. It can also run up to 25% faster at higher temperatures without damaging the bit on hard materials such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Black Oxide
    7/32"
    		0.2188"
    		3 3/4"0.92"Round
    		7/32"Split
    		Cleveland3146A12300000
     
    Extended Length
     
    Uncoated
    7/32"
    		0.2188"
    		6"2.06"Round
    		7/32"Split
    		Dormer Pramet8934A2200000
    7/32"
    		0.2188"
    		12"2.06"Round
    		7/32"Split
    		Dormer Pramet8934A4200000
     

    Carbide-Tipped Drill Bits for Hardened Steel

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Hardened Steel, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. A lower-priced alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"0.87"Round
    		7/32"Notched
    		Izar2973A22000000
     

    Coolant-Fed Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Coolant-Fed Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Product. Side1 orientation. Drill Bits. Coolant-Fed Carbide Drill Bits, Maintenance Length, Round Shank.

    Jobbers' Length

    Round Shank

    Maintenance Length

    Round Shank

    The hardest and most wear-resistant bits, these deliver coolant to reduce heat and evacuate chips. They are designed for CNC machines that supply coolant through the spindle rather than an external source, such as a hose and nozzle. Coolant flows directly from holes in the bit's tip onto the drilling surface. This speeds up cuts and leads to excellent performance in deep holes and tough materials such as stainless steel and titanium.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Maintenance Length—Shorter than jobbers' length, these bits are more rigid for less wobble when drilling hard material. Also known as mechanics’ bits.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Mfr.
    Each
    Jobbers' Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3"1.38"Round
    		7/32"Four Facet
    		Garr Tool2396N627000000
     
    Maintenance Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		2 5/8"1.09"Round
    		7/32"Four Facet
    		Garr Tool2396N88900000
     

    High-Speed Steel Drill Bits for Sheet Metal

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Sheet Metal, Short Length, Round Shank, 2 Drilling Ends.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Short Length

    Round Shank

    2 Drilling Ends

    Split

    Short flutes make shallow cuts through sheet metal and thin-wall tubing without snagging and deforming the material. High-speed steel bits are good for general purpose drilling in most metals.
    Short Length—The most rigid bits for drilling the straightest holes.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    No. of Drilling
    Ends
    Mfr.
    1-11
    12-Up
    Short Length
     
    Black Oxide
    7/32"
    		0.2188"
    		2 5/8"0.69"Round
    		7/32"Split
    		2Viking Norseman Drill3163A730000000000
     

    Precise-Cut High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Precise-Cut High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Produce holes so precise that you don’t need to finish them with a reamer. The double-edged flutes keep these bits centered to drill straighter and smoother than other types, especially in hard metals and composites such as fiberglass. Also known as double-margin drill bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 3/4"2.5"Round
    		7/32"Standard
    		Republic Drill3021A2800000
     

    Smooth-Finish Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Smooth-Finish Carbide Drill Bits, Jobbers' Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Jobbers' Length

    Round Shank

    Split

    With more cutting edges than other drill bits, these cut continuously and consistently for a smoother finish. They also stay centered to produce holes that are straighter and more accurate. However, since there’s less space between the cutting edges, they don’t clear chips as quickly. Made of carbide, these are the hardest and most wear-resistant drill bits you can buy. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Uncoated
    7/32"
    		0.2188"
    		3"1.4"Round
    		7/32"Split
    		Ultra Tool3171A42000000
     

    Chip-Clearing Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 5/8"2.2"ParabolicRound
    		7/32"Split
    		Viking Norseman Drill3183A52000000
     
    Uncoated
    7/32"
    		0.2188"
    		3 5/8"2.2"ParabolicRound
    		7/32"Split
    		Viking Norseman Drill29925A9220000
     

    High-Speed Steel Drill Bits for Wood Screws

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Wood Screws.
    Achieve a perfect fit for wood screws with bits that match their exact thread size and diameter. Wear and heat resistant, they're good for soft and hard woods.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    For Screw
    Size
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Uncoated
     
    Round Shank
    7/32"
    		0.2188"
    		No. 12
    		3 3/4"2 1/2"7/32"Standard
    		W. L. Fuller3080A2300000
    7/32"
    		0.2188"
    		No. 12
    		6"3.63"7/32"Standard
    		W. L. Fuller30915A8100000
     

    Short-Flute Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Carbide-Tipped Drill Bits, Extended Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Extended Length

    Round Shank

    Split

    Our strongest short-flute bits, these have a carbide tip that stays sharp when drilling abrasive materials, such as titanium. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter.
    Extended Length—Drill through panels and thick workpieces with our longest bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Extended Length
     
    Uncoated
    7/32"
    		0.2188"
    		6"2.5"Round
    		7/32"Split
    		Rock River Tool2854A57000000
    7/32"
    		0.2188"
    		12"1.95"Round
    		7/32"Split
    		ICS2854A1600000
     

    Carbide Drill Bits for Sheet Metal

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Sheet Metal, Short Length, Round Shank.

    Short Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    The hardest and most wear-resistant bits for sheet metal and thin-wall tubing. They have short flutes that make shallow cuts without snagging and deforming the material. Carbide stays sharp at high temperatures and faster speeds than high-speed steel. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    No. of Drilling
    Ends
    Mfr.
    Each
    Short Length
     
    Uncoated
    7/32"
    		0.2188"
    		2"0.5"Round
    		7/32"Standard
    		1Ultra Tool8769A26000000
     

    Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits for Nickel and Stainless Steel, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Excellent for challenging metals such as stainless steel and nickel alloys, these bits cut aggressively and evacuate chips quickly. The grooved flutes prevent clogs and improve coolant flow to dissipate heat that can damage the bit or your material. Bits are made of tough and wear-resistant cobalt steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    7/32"
    		0.2188"
    		3 5/8"2.24"ParabolicRound
    		7/32"Split
    		Guhring3020A19000000
     

    Hole-Starting Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Hole-Starting Carbide Drill Bits, Short Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Short Length

    Round Shank

    Split

    Harder and more wear resistant than cobalt steel, these carbide bits create an accurate starting place in your workpiece. Cut an indent, then continue drilling with a longer bit. The indent prevents slipping so the final hole is centered and precise. Carbide stays sharp at high temperatures and faster speeds. It can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Short Length—The most rigid bits for drilling the straightest holes.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Shank
    140° Point Angle
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Short Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		2 1/2"0.66"Round
    		7/32"Split
    		GWS88915A270000000
     

    Chip-Clearing Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Carbide Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Standard

    The hardest and most wear-resistant bits, the flutes clear chips and improve coolant flow. They prevent clogs and dissipate heat that can damage the bit and the hole. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    7/32"
    		0.2188"
    		3 25/32"2.24"ParabolicRound
    		7/32"Standard
    		Guhring8822A63000000
     
    Uncoated
    7/32"
    		0.2188"
    		3 25/32"2.24"ParabolicRound
    		7/32"Standard
    		Guhring8822A2300000
     

    Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits for Aluminum, Brass, and Bronze, Jobbers' Length, Low Helix Flute, Round Shank.

    Jobbers' Length

    Low Helix Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Designed for soft metals that can gum up other drill bits, wide flutes lift chips out of the hole. This prevents clogs that can weaken and damage the bit and ruin the hole. Also known as slow spiral bits, these are made of versatile high-speed steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Mfr.
    1-11
    12-Up
    Jobbers' Length
     
    Uncoated
    7/32"
    		0.2188"
    		3 3/4"2.06"Low HelixRound
    		7/32"Standard
    		Chicago-Latrobe2928A2220000000000
     

    Extensions for Round-Shank Drill Bits

    Image of Product. Front orientation. Contains Annotated. Drill Bit Extensions. Extensions for Round-Shank Drill Bits, Two-Piece Extensions.

    Two-Piece Extensions

    Attach to the shank of a drill bit to extend its reach.
    Two-Piece Extensions—To attach two-piece extensions, insert a drill bit into the collet, then thread the collet onto the extension and tighten with a wrench.
    For Drill Bit
    Size
    Size Decimal
    Equiv.
    Shank
    Size
    Shank
    Size
    Overall
    Lg.
    OD
    Material
    Each
    For Inch Drill Bits
     
    Two-Piece Extensions
    7/32"0.2188"7/32"1/4"4 1/2"7/16"Steel
    		3016A828000000
    7/32"0.2188"7/32"1/4"9 1/2"7/16"Steel
    		3016A85500000
     
    back to top