These jobbers'-length bits have the rigidity and length required for most applications.

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short‐length bits.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Drill long, straight holes with these bits. Channels in the bit allows coolant to flow through the tool for more efficient chip evacuation. Also known as gun drills.

These jobbers'-length bits have the rigidity and length required for most applications.

Drill safely in flammable environments. Made of Factory Mutual (FM) approved beryllium copper, these bits won’t create sparks that could ignite if they made contact with combustible vapors or residues.

Access hard-to-reach spots and drill deep holes.

More wear resistant than cobalt steel and high-speed steel, carbide-tipped bits maintain a sharper, harder edge at high temperatures for excellent performance on abrasive material, such as plastic. Because they aren’t as brittle as solid carbide bits, they can be used in less rigid setups, such as a hand-held drill.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Drill holes up to 1 1/2" in diameter.

Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.

A more controlled chip removal reduces heat buildup. Use these bits on brittle material such as block and brick.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Adapt a bit for use on a drilling rig with a different thread size.

Use these bits with handheld power drills, drill presses, and hammer drills.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

A built-in stop ensures repeatable drilling depths for installing drop-in anchors.

Multiple outlining teeth bore clean, flat-bottom holes without chipping or splintering your surface—even when cutting across the grain. Also known as multispur bits.

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

An open spiral-flute design clears chips quickly, so these bits can bore smooth, deep holes through construction lumber, railroad ties, and utility poles. Also known as pole or ship auger bits.

The screw point draws the bit in, quickly boring holes without applying pressure.

Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

These jobbers'-length bits have the rigidity and length required for most applications.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

The spear-shaped point drills smoothly through glass and ceramic.

Because softer metal, like aluminum, brass, and bronze, can clog a bit, the flutes on these bits lift chips out of the hole. Also known as slow-spiral drill bits.

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

Use for drilling in most metal.

Use for drilling in most metal.

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Keep flexible-shaft drill bits centered between studs and drywall.

Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit.

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

These jobbers'-length bits have the rigidity and length required for most applications.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Make fast bit changes—each bit has the same shank diameter, eliminating the need for different collets to hold each size.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

A more controlled chip removal reduces heat buildup. Use these bits on brittle materials such as block and brick.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Bore smooth-finish, flat bottom holes in soft wood, veneer, and laminates. Also known as Forstner bits.

These pouches fit onto most hand-held power drills and impact drivers. They have a magnetic panel on the front that can hold bits and fasteners.

Tighten the set screws to secure the drill bit in the extension.

A quick-change mechanism allows fast bit changes.

Use these inch size cutters with magnetic-base drills.Also known as annular cutters.

The geometry of these cutters allows you to cut aligned holes in multiple sheets at one time. Also known as annular cutters.

For general purpose use.

For use on hard-to-machine materials, these countersinks are cobalt steel for better heat and abrasion resistance than high-speed steel.

For applications where the workpiece will go through several machining processes, these countersinks bevel the outer edges of the hole and provide an additional 120° chamfer to prevent damage to the center hole.

No need to create a starter hole—the drill point is incorporated into the countersink flutes.

For general purpose use.

For excellent performance on hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

Carbide is harder, stronger, and more wear resistant than high-speed steel for excellent performance on hard and abrasive materials.

Also called subland drill bits. The 90° countersink angle guides the tap into the hole.

Drill and counterbore holes with enough clearance for socket head screws without changing tools.

No need for separate tools, these sets have counterbores in various sizes that drill and counterbore holes with enough clearance for socket head cap screws.

Drill and ream holes for tapered pins with the same tool. They are for use in drill presses, turret lathes, screw machines, and other machine tools.

Drill and finish holes in a single pass with these dual-purpose tools.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

Quickly install threaded rods and studs using a cordless drill, instead of doing it by hand.

Store a variety of sizes and styles of bits and adapters in one compact tray.

Keep these caddies in your tool drawer or take them with you.

These sets have a variety of extractors to drill and remove broken screws, bolts, and studs with a single tool.

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.