Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

These jobbers'-length bits have the rigidity and length required for most applications.

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

These jobbers'-length bits have the rigidity and length required for most applications.

Use these bits for general purpose drilling in most material.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Carbide-tipped bits maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

These jobbers'-length bits have the rigidity and length required for most applications.

Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

Designed to lift chips out of the hole, these bits reduce clogging and improve coolant flow.

These cutters are perfectly sized for cutting holes that will be tapped later. Also known as annular cutters.

Use these cutters with Milwaukee magnetic-base drill presses. Also known as annular cutters.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.

A magnet or retaining ring holds the nut in place.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

These high-speed steel saws cuts through aluminum, brass, bronze, and steel.

Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.