McMaster-Carr logo
    Filter by
    System of Measurement
    For Hole Type
    Number of Pieces
    Chamfer Type
    Pipe Size
    Industrial Info Compare
    Number of Taps
    Number of Drill Bits
    Screw Size
    Industrial Info Snippet
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Industrial Info Compare
    Shape
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Tap, Die, and Drill Bit Sets

    Image of Product. Front orientation. Tap, Die, and Drill Bit Sets.
    Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
    Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    No. of
    Pieces
    Tap Sizes Included
    Die Sizes Included
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Tap Chamfer
    Type
    Each
    Carbon Steel
     
    Right-Hand Thread
    1174-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, ZPlastic CaseDie Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)Taper, Plug82955A110000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    18Plug6-32
    8-32
    10-24
    10-32
    1/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelMetal Case27275A270000000
     

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.
    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Pouch.

    Metal Case

    Plastic Pouch

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    10Plug1 each of sizes:
    1/4"-20
     5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC
    		4Not Rated27/64"
    5/16"
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelPlastic Pouch26175A72000000
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case2610A11000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case2610A13000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed Steel, Gold-Oxide High-Speed SteelMetal Case26175A11000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case26175A13000000
     

    Hex-Shank Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Hex-Shank Tap and Drill Bit Sets.
    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    36Plug1 each of sizes:
    6-32
    6-40
    8-32
    8-36
    10-24
    10-32
    12-24
    12-28
    1/4"-20
    1/4"-28
    5/16"-18
    5/16"-24
    3/8"-24
    3/8"-16
    7/16"-14
    7/16"-20
    1/2"-13
    1/2"-20    		2"
    2 1/8"
    2 5/32"
    2 11/64"
    2 3/8"
    2 1/2"
    2 15/16"
    3 5/32"
    3 7/32"    		UNC, UNF
    		3, 4H2, H31 each of sizes:
    25/64"
    27/64"
    29/64"
    5/16"
    36 ga.
    33 ga.
    25 ga.
    21 ga.
    16 ga.
    15 ga.
    7 ga.
    3 ga.
    F
    I
    Q
    U
    2 each of sizes:
    29 ga.    		Black-Oxide High-Speed SteelMetal Case2727A190000000
     

    Thread-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Thread-Locking Threaded Inserts with Installation Tools.
    What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    5/16"-18
    		1/2"-13
    		0.484"27/64"
    		0.422"Slotted
    		1095109A112000000
    1/2"-13
    		3/4"-10
    		0.656"21/32"
    		0.656"Slotted
    		1095109A114000000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		1096015A11300000
    1/2"-13
    		5/8"-11
    		0.625"37/64"
    		0.578"Slotted
    		1096015A114000000
     

    Tap-Size Hollow-Core Cutters for Magnetic-Base Drills

    Image of Product. Front orientation. Hollow-Core Cutters. Tap-Size Hollow-Core Cutters for Magnetic-Base Drills.
    These cutters are perfectly sized for cutting holes that will be tapped later. Use them with magnetic-base drills. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. They're also known as annular cutters.
    Hollow-Core Cutter Pilot Pins—Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
    Cutters
    Hollow-Core
    Cutter Pilot Pins
    Dia.
    For Tap Thread
    Size
    For Pilot
    Pin Dia.
    Each
    Each
    High-Speed Steel
     
    2" Cutting Depth
    27/64"1/2"-13
    		3/16"6849A410000003124A82000000
     
    Hollow-Core Cutter Arbor Adapters
    You can also pair the cutters with an arbor adapter (sold separately) when using a manual drill press or milling machine.
    Round Shank—Arbor adapters for a round shank fit a drill chuck or an R8 collet on a milling machine.
    Morse Taper Shank—Arbor adapters for a Morse Taper spindle are for use on a drill press.
    Shank Type
    Machine
    Taper No.
    Shank
    Dia.
    Overall
    Lg.
    Each
    For Cobalt Steel and High-Speed Steel
    Round—3/4"5 1/8"31315A2540000000
    Morse TaperMorse 2—6 1/4"31315A255000000
    Morse TaperMorse 3—6 1/4"31315A251000000
     

    Helical Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Insert Assortments with Installation Tools.
    Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Pronged
     
    18-8 Stainless Steel
    181/2"-13 Thread × 1" Installed Lg. (6 Each)
    1/2"-13 Thread × 1/2" Installed Lg. (6 Each)
    1/2"-13 Thread × 3/4" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		17/32"
    		0.531"91732A937000000
    541/2"-13 Thread × 3/4" Installed Lg. (6 Each)
    1/4"-20 Thread × 3/8" Installed Lg. (12 Each)
    3/8"-16 Thread × 0.562" Installed Lg. (12 Each)
    5/16"-18 Thread × 0.469" Installed Lg. (12 Each)
    5/8"-11 Thread × 15/16" Installed Lg. (6 Each)
    7/16"-14 Thread × 0.656" Installed Lg. (6 Each)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Coarse
    		17/64"
    21/64"
    25/64"
    29/64"
    17/32"
    21/32"
    		0.266"
    0.328"
    0.391"
    0.453"
    0.531"
    0.656"    		90285A121000000
     

    Hole Saws for Hard Metal

    Image of Product. Front orientation. Hole Saws. Hole Saws for Hard Metal.
    Image of Product. Front orientation. Hole Saw Arbors. Hole Saws for Hard Metal.
    Image of Product. Front orientation. Hole Saw Pilot Drill Bits. Hole Saws for Hard Metal.

    Arbors

    Pilot

    Drills

    The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium. They can be sharpened, so they last longer than saws with carbide-tipped steel teeth. Use them on a drill or drill press. An arbor and pilot drill (sold separately) are required.
    Hole Saws
    Arbors
    Pilot Drills
    Material
    Dia.
    For Arbor
    Thread Size
    Body
    Tooth
    Each
    Shank
    Size
    Each
    Pilot Drill
    Dia.
    Pilot Drill
    Lg.
    Each
    For Cast Iron, Stainless Steel, Steel, and Titanium
     
    1" Cutting Depth
    3/4"1/2"-13
    		SteelCarbide4118A110000003/8"4118A560000001/4"2 3/4"4118A61000000
    7/8"1/2"-13
    		SteelCarbide4118A12000003/8"4118A56000001/4"2 3/4"4118A6100000
     
    2" Cutting Depth
    3/4"1/2"-13
    		SteelCarbide4118A36000003/8"4118A56000001/4"3 3/4"4118A8300000
    7/8"1/2"-13
    		SteelCarbide4118A37000003/8"4118A56000001/4"3 3/4"4118A8300000
     

    Friction Drill Bits for Tapping Sheet Metal

    Image of ProductInUse. Front orientation. ZoomedIn view. Contains Border. Friction Drill Bits.
    Image of Product. Front orientation. Friction Drill Bits.
    Pair these bits with a friction drill and a collet (sold separately) and mount on a drill press, milling machine, or CNC machine to use friction heat to melt through sheet metal and quickly produce a hole with a lip. The lip that is formed is approximately three times the material thickness.
    Friction Drill Bits
    Friction
    Drill Collets
    For Hole
    Thread Size
    Dia.
    Shank Dia.,
    mm
    For Material
    Thk. Range
    Min. Rotation
    Speed, rpm
    Material
    Each
    Each
    1/2"-13
    		0.46"140.0339" to 0.1181"1,300Tungsten Carbide1643A2700000001643A614000000

    Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers.
    Save time when you need to change drill taps frequently. The grooved shank snaps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, they’re not rated for impact drivers. With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. They’re made of high-speed steel and are for use on most metal and plastic.
    Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Hex Shank
    Size
    Each
    Uncoated High-Speed Steel
    1/2"-13
    		1 3/8"5 1/16"27/64"
    		0.4219"118°Spiral2UNC
    		H31/4"3464A63000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    1/2"-13
    		1 3/8"5 1/16"27/64"
    		0.4219"118°Spiral2UNC
    		H31/4"3464A12400000
     

    Drill Taps

    Image of Product. Front orientation. Drill Taps. Drill Taps, Spiral Flute.

    Spiral Flute

    Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Titanium Nitride (TiN)-Coated High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Each
    Uncoated High-Speed Steel
    1/2"-13
    		1 3/8"4 1/16"27/64"
    		0.4219"110°Spiral2UNC
    		H32748A57000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    1/2"-13
    		1 3/8"4 1/16"27/64"
    		0.4219"118°Spiral2UNC
    		H32748A9100000
     

    Threaded Rod and Stud Driver Bits

    Image of Product. Front orientation. Threaded Rod and Stud Driver Bits.
    Quickly install threaded rods and studs using a cordless drill, instead of doing it by hand. These driver bits have an opening that grips the rod without damaging its threads. Connect them to your drill using their quick-change hex shank, which has a groove to make it fit without needing an adapter. Do not use these bits with impact drivers because they could distort the threads on the rod.
    For Thread
    Size
    Overall
    Lg.
    Material
    Each
    1/4" Quick-Change Hex Shank
    1/2"-13
    		2 5/8"Steel8012N12000000
     

    Tapping Threaded Insert Assortments for Soft Metal

    Image of Product. Front orientation. Threaded Inserts. Tapping Threaded Insert Assortments for Soft Metal.
    Cut a variety of thread sizes into aluminum and other soft metal—no taps required. These inserts cut their own threads and lock into material, so they won’t budge when you install or remove a screw. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool (not included) with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Zinc-Plated Steel
    501/2"-13 Thread x 0.945" Installed Lg. (10 each)
    1/4"-20 Thread x 0.472" Installed Lg. (10 Each)
    3/8"-16 Thread x 0.709" Installed Lg. (10 Each)
    5/16"-18 Thread x 0.551" Installed Lg. (10 Each)
    7/16"-14 Thread x 0.866" Installed Lg. (10 Each)
    Drill Bits    		7/16"
    33/64"
    19/32"
    L
    U
    		0.290"
    0.368"
    0.438"
    0.516"
    0.594"    		93491A1300000000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Drill Bit, Through-Hole Tap, Installation Tool.

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    1/2"-13
    		0.500"33/64"
    		0.531"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A580000000
    1/2"-13
    		0.750"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93800000
    1/2"-13
    		1"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A59000000
    1/2"-13
    		1.250"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A144000000
    1/2"-13
    		1.500"33/64"
    		0.531"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A145000000
     
    back to top