M6 Drill Bits | McMaster-Carr

Filter by

System of Measurement

For Use On

Thread Pitch

Thread Type

For Hole Type

Component

Tap Sizes Included

1 each of sizes M2.5 × 0.45 mm, M3 × 0.50 mm, M3.5 × 0.60 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm,

1 each of sizes M3 × 0.5 mm, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1.0 mm, M8 × 1.25 mm, and M10 × 1.5 mm

1 each of sizes M3 × 0.50 mm, M3.5 × 0.60 mm, M4 × 0.70 mm

1 each of sizes M6 × 1.0, M8 × 1.25, M10 × 1.5, M12 × 1.75, and M16 × 2.0

3 each of sizes M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, and M12 × 1.75 mm

Shank Type

Chamfer Type

Die Sizes Included

Number of Pieces

Sold As

Shape

Drill Bit Size

Pipe Size

Flute Type

Material

Number of Taps

Number of Drill Bits

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Compliant

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Forward

How can we improve?

Help me decide (beta)

45 Products

Tap, Die, and Drill Bit Sets

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.

Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

	Drill Bit Sizes Included	Container Type	Includes	Tap Chamfer Type	Mfr.		Each
Carbon Steel







	Right-Hand Thread

	117	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm	5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, Z	Plastic Case	Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)	Taper, Plug	Black & Decker	82955A11	0000000

Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers

Plastic Case

Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, the taps in these sets can drill and tap holes in a single step. They also save you time when changing from tool to tool. The grooved shank snaps directly to drills, power screwdrivers, and other tools that accept a _1/4" hex shank. However, these taps aren’t rated for impact drivers. They’re made of high-speed steel and are for use on most metal and plastic.

Recommended for use in through holes, these taps have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.

Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

	Chamfer Type	Tap Sizes Included	Flute Type	No. of Flutes	Drill Bit Sizes Included	Container Type	Includes	Mfr.		Each
Uncoated High-Speed Steel



	7	Plug	M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm	Spiral	2	3/32" 1/8" 11/64" 13/64" 17/64" 31/64"	Plastic Case	Chuck	Volkel	3464A32	0000000

Tap and Drill Bit Sets

Metal Case

Plastic Pouch

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.

Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.

Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Bottoming Chamfer—Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.

Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.

Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.

	Chamfer Type	Tap Sizes Included	Overall Lg.	Thread Type	No. of Flutes	Pitch Dia. Limit	Drill Bit Sizes Included	Drill Bit Material	Container Type	Includes	Mfr.		Each
Uncoated Carbon Steel Tap



	29	Taper, Plug, Bottoming	3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	1 39/64" 1 27/32" 2 1/64" 2 3/32" 2 13/64" 2 3/4" 2 61/64"	Metric	3, 4	H6	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm	Black-Oxide High-Speed Steel	Metal Case	Tap Wrench	Volkel	2608A12	0000000


	Uncoated High-Speed Steel Tap



			16	Plug	1 each of sizes: M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 3/4" 2 15/16" 3 3/8"	Metric	3, 4	D3, D4, D5, D6	2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.75 mm 8.5 mm 10.25 mm	Black-Oxide High-Speed Steel	Plastic Pouch	—	Republic Drill	2610A45	000000


			18	Plug	1 each of sizes: M2.5 × 0.45 mm M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	1 3/4" 1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 3/8"	Metric	3, 4	D3, D4, D5, D6	2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.7 mm 8.5 mm 10.2 mm	Uncoated High-Speed Steel	Metal Case	—	Chicago-Latrobe	26175A12	000000
			29	Taper, Plug, Bottoming	3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm	1 39/64" 1 27/32" 2 1/64" 2 3/32" 2 13/64" 2 3/4" 2 61/64"	Metric	3, 4	H6	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm	Black-Oxide High-Speed Steel	Metal Case	Tap Wrench	Volkel	2608A13	000000

Hex-Bit Tap Sets

The taps in these sets have the same hex shank as screwdriver bits. Snap them into the included driver to thread a range of hole sizes. Then switch to a screwdriver bit to install the fastener. Taps have straight flutes that are good for most jobs.

High-Speed Steel—Multiple Thread Size Sets

Image of Product. Front orientation. Taps. Hex-Bit Tap Sets.

The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include multiple sizes of plug chamfer taps for through holes and blind holes.

Uncoated—The economical choice, these won't last as long as coated taps.

							Plug Chamfer
	No. of Pieces	Thread Size	Thread Type	Container Type	No. of Flutes	Shank Type		Each
Uncoated



		8	1 each of sizes M3 × 0.5 mm, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1.0 mm, M8 × 1.25 mm, and M10 × 1.5 mm	Metric	Plastic Case	4	Hex	3095N11	0000000

Chip-Clearing Tap and Drill Bit Sets for Through Holes

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.

	Chamfer Type	Tap Sizes Included	Overall Lg.	Thread Type	No. of Flutes	Pitch Dia. Limit	Drill Bit Sizes Included	Drill Bit Material	Container Type	Mfr.		Each
Gold-Oxide High-Speed Steel Tap



	18	Plug	M2.5 × 0.45 mm M3 × 0.5 mm M3.5 × 0.6 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.5 mm M12 × 1.75 mm	1 13/16" 1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 3/8"	Metric	2, 3	D3, D4, D5, D6	2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5 mm 6.7 mm 8.5 mm 10.2 mm	Black/Gold Oxide High-Speed Steel	Metal Case	Viking Norseman Drill	27275A11	0000000

Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers

All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.

	Chamfer Type	Tap Sizes Included	Overall Lg.	Thread Type	No. of Flutes	Drill Bit Sizes Included	Drill Bit Material	Container Type	Includes	Mfr.		Each
Uncoated High-Speed Steel Tap



	13	Plug	M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm	1 19/64" 1 27/64" 1 35/64" 1 37/64"	Metric	3, 4	2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm	Uncoated High-Speed Steel	Plastic Case	Chuck	Volkel	2608A14	0000000

Thread-Locking Threaded Inserts with Installation Tools

What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	Drill Bit Size	For Max. Hole Dia.	Drive Style	No. of Inserts Included		Each
Standard Wall







	Black Phosphate-Coated Steel

	M6 x 1 mm	M10 x 1.5 mm	10.5 mm	8.6 mm	8.6 mm	Slotted	10	90025A112	000000


	Thin Wall







					Black Phosphate-Coated Steel

					M6 x 1 mm	3/8"-16	0.375"	Q	0.332"	Slotted	10	90025A115	00000

Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers

Save time when you need to change drill taps frequently. The grooved shank snaps directly into drills, power screwdrivers, and other tools that accept a _1/4" hex shank. However, these taps aren’t rated for impact drivers. With a drill bit point to drive into the workpiece, they can drill and tap holes in a single step. They’re made of high-speed steel and are for use on most metal and plastic.

These taps have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.

Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.

Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

	Thread			Drill Bit									Plug Chamfer
	Size	Lg.	Overall Lg.	Size, mm	Decimal Size Equiv.	Point Angle	Flute Type	No. of Flutes	Thread Type	Pitch Dia. Limit	Hex Shank Size	Mfr.		Each
Uncoated High-Speed Steel



		M6 × 1 mm	25/32"	3 1/2"	5	0.1968"	118°	Spiral	2	Metric	D5	1/4"	GWS	3464A53	000000


		Titanium Nitride (TiN)-Coated High-Speed Steel



				M6 × 1 mm	25/32"	3 1/2"	5	0.1968"	118°	Spiral	2	Metric	D5	1/4"	GWS	3464A128	00000

Hex-Bit Taps

You only need one tool to turn these taps and install screws. The _1/4" hex shank fits hand or powered screwdrivers for threading holes. Then switch to a screwdriver bit to finish the job. To tap in hard-to-reach spots, add a bit extension. Taps have straight flutes that are good for most jobs.

High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.

Uncoated—The economical choice, these won't last as long as coated taps.

Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.

						Drill Bit				Plug Chamfer
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	No. of Flutes	Size, mm	Decimal Size Equiv.	Shank Type	Hex Shank Size		Each
High-Speed Steel







				Uncoated

				M6 × 0.75 mm	11/16"	1 15/32"	Metric	3	5.2	0.2047"	Hex	1/4"	1021N26	000000


				M6 × 1 mm	11/16"	1 9/16"	Metric	3	5	0.1968"	Hex	1/4"	1021N25	00000

Tapping Threaded Insert Assortments for Soft Metal

Cut a variety of thread sizes into aluminum and other soft metal—no taps required. These inserts cut their own threads and lock into material, so they won’t budge when you install or remove a screw. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool (not included) with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.

Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.

	Includes	Drill Bit Size	For Max. Hole Dia.		Each
Zinc-Plated Steel



	40	Drill Bits M6x1.0 mm Thread x 12 mm Installed Lg. (10 Each) M8x1.25 mm Thread x 14 mm Installed Lg. (10 Each) M10x1.5 mm Thread x 18 mm Installed Lg. (10 Each) M12x1.75 mm Thread x 22 mm Installed Lg. (10 Each)	7/16" 33/64" L U	0.290" 0.368" 0.438" 0.516"	93491A140	0000000

Helical Threaded Inserts with Installation Tools

Drill Bit, Installation Tool

and Through-Hole Tap

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	For Max. Hole Dia.	No. of Inserts Included	Includes		Each
Pronged







	18-8 Stainless Steel

	M6 x 1 mm	6	6.25	0.250"	10	Drill Bit Installation Tool Through-Hole Tap	91732A461	000000


	M6 x 1 mm	9	6.25	0.250"	10	Drill Bit Installation Tool Through-Hole Tap	91732A948	00000
	M6 x 1 mm	12	6.25	0.250"	10	Drill Bit Installation Tool Through-Hole Tap	91732A471	00000
	M6 x 1 mm	15	6.25	0.250"	10	Drill Bit Installation Tool Through-Hole Tap	98356A158	00000
	M6 x 1 mm	18	6.25	0.250"	10	Drill Bit Installation Tool Through-Hole Tap	98356A159	00000

Drill Taps

Spiral Flute

Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.

Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.

Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

	Thread			Drill Bit								Plug Chamfer
	Size	Lg.	Overall Lg.	Size, mm	Decimal Size Equiv.	Point Angle	Flute Type	No. of Flutes	Thread Type	Pitch Dia. Limit	Mfr.		Each
Uncoated High-Speed Steel



		M6 × 1 mm	25/32"	2 1/2"	5	0.1968"	110°	Spiral	2	Metric	D5	Regal Cutting Tools	2748A64	000000


		Titanium Nitride (TiN)-Coated High-Speed Steel



				M6 × 1 mm	25/32"	2 1/2"	5	0.1968"	118°	Spiral	2	Metric	D5	GWS	2748A95	00000

Tap and Drill Bit Cabinets

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

				Overall
	Holds Tap Sizes	No. of Compartments	No. of Drawers	Wd.	Dp.	Ht.	Material	Lock Type	No. of Keys Included		Each
For Taps







				For Metric Taps

				M3 × 0.5 mm to M24 × 3 mm	29	3	14 5/8"	7 3/8"	7 3/4"	Steel	—	—	2543A49	0000000




						For Inch, Metric Taps

						1/4"-20 to 1 1/2"-12 2-56 to 12-28 M2.5 × 0.45 mm to M30 × 3.5 mm	152	4	26"	12"	12 1/2"	Steel	Keyed	2	2551A72	000000

Helical Threaded Insert Assortments with Installation Tools

Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Drill Bit Size	For Max. Hole Dia.		Each
Pronged







	18-8 Stainless Steel

	18	Drill Bit Installation Tool M6×1 mm Thread × 12 mm Installed Lg. (6 Each) M6×1 mm Thread × 6 mm Installed Lg. (6 Each) M6×1 mm Thread × 9 mm Installed Lg. (6 Each) Prong Break-Off Tool Through-Hole Tap	Coarse	1/4"	0.250"	91732A947	000000


	48	Drill Bits Installation Tools M5×0.8 mm Thread × 7.5 mm Installed Lg. (12 Each) M6×1 mm Thread × 9 mm Installed Lg. (12 Each) M8×1.25 mm Thread × 12 mm Installed Lg. (12 Each) M10×1.5 mm Thread × 15 mm Installed Lg. (12 Each) Through-Hole Taps	Coarse	13/64" 1/4" 21/64" 13/32"	0.203" 0.250" 0.328" 0.406"	90285A131	000000

Drill Jigs for T-Slotted Framing

For Single Rails

Align and drill accurate holes in T-slotted rails with these reusable templates. Mount the jig to the rail, then drill through the bushing to keep your drill bit from moving in the T-slot.

	Drill Jigs									Replacement Bushings
		Through Hole		Counterbored Hole
	For Rail Ht., mm	No. of	Dia., mm	No. of	Dia., mm	Material	Mounting Fasteners Included		Each		Each
For Single Rails



		25	1	5.1	—	—	Anodized Aluminum	Yes	6812N223	000000	6812N225	000000


		25	2	5.1	—	—	Anodized Aluminum	Yes	6812N224	00000	6812N225	00000
		30	1	7.8	1	11	Steel	Yes	6812N222	000000	———	0

Impact Wrench Tap Sets

Tap holes with a range of thread sizes 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).

Hardened High-Speed Steel—Multiple Tap Thread Sizes

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.

						Shank		Taper Chamfer
	No. of Pieces	Thread Size	Thread Type	Container Type	No. of Flutes	Type	Size		Each
Titanium Nitride (TiN) Coated



		5	M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm, M12 × 1.75 mm, M16 × 2 mm	Metric	Foam Tray	4	VersaDrive Hex	7/16"	9617N14	0000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, reamers, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each







			Quick-Change Pull-Back Tool Release

			1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000




					Strong-Hold Push-Forward Tool Release

					3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


					1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
					3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

		Each
Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)	9594N111	000000

Impact Wrench Chip-Clearing Tap Sets

Cut the cleanest, quickest threads in a range of sizes without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

						Shank		Spiral Flute for Blind Holes
	No. of Pieces	Thread Size	Thread Type	No. of Flutes	Container Type	Type	Size	Chamfer Type		Each
Hardened High-Speed Steel







				Titanium Nitride (TiN) Coated

				5	M6, M8, M10, M12, M16	Metric	3	Foam Tray	VersaDrive Hex	7/16"	Plug	9611N12	0000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

Quick-Change with

Clutch Overload

Protection

These chucks mount directly onto the square drive of your impact wrench. You can use any of these chucks when tapping through holes.

Impact Wrench Chucks with Clutch Overload Protection—Use to tap blind holes. The clutch will engage when the tap contacts the bottom of the hole to prevent it from breaking. Choose the chuck that’s rated for the hole diameter you are tapping.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	For Blind Hole Dia.	Includes		Each
Impact Wrench Chucks







				Quick-Change Pull-Back Tool Release

				1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	—	Retaining Ring, Retention Pin	9589N112	000000




						Strong-Hold Push-Forward Tool Release

						3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N111	000000


						1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N113	000000
						3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N114	000000


						Impact Wrench Chucks with Clutch Overload Protection







										Quick-Change Pull-Back Tool Release

										1/2"	VersaDrive Hex	7/16"	4"	Manganese Phosphate-Coated Steel	5/16" to 1/2", 8 mm to 12 mm	Retaining Ring, Retention Pin	9613N21	000000


										1/2"	VersaDrive Hex	7/16"	4 1/2"	Manganese Phosphate-Coated Steel	1/2" to 5/8", 12 mm to 16 mm	Retaining Ring, Retention Pin	9613N22	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Impact Wrench Chip-Clearing Taps

Cut the cleanest, quickest threads without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

					Drill Bit		Shank		Spiral Flute for Blind Holes
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	Size, mm	Decimal Size Equiv.	Type	Size	Chamfer Type	No. of Flutes		Each
Hardened High-Speed Steel







				Titanium Nitride (TiN) Coated

				M6 × 1 mm	25/32"	2 1/4"	Metric	5	0.1968"	VersaDrive Hex	7/16"	Plug	3	9613N16	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. You can use any of these chucks when tapping through holes.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each







			Quick-Change Pull-Back Tool Release

			1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000




					Strong-Hold Push-Forward Tool Release

					3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


					1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
					3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Impact Wrench Drill Taps

Drill and thread holes in a single fluid step that’s 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these drill taps are built to handle the high torque of your impact wrench to cut material quickly. A built-in pilot starts the hole while the taper chamfer gradually engages material for clean, accurate threads. Your wrench’s rapid hammering helps break and clear chips as you cut, so you don’t need to pause and reverse. This also means these drill taps are less likely to jam on chips and snap. They’re a great choice for quickly preparing threaded through holes in thin materials.

You’ll need a VersaDrive chuck (sold separately) to install these drill taps into your impact wrench. You can also get chucks for impact drivers (sold separately).

Titanium Nitride (TiN)-Coated Hardened High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.

Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

	Thread			Drill Bit											Taper Chamfer
	Size	Lg.	Overall Lg.	Size, mm	Decimal Size Equiv.	Point Angle	Max. Tapping Dp.	Flute Type	No. of Flutes	Thread Type	Pitch Dia. Limit	Shank Type	Hex Shank Size	Mfr.		Each
Titanium Nitride (TiN)-Coated Hardened High-Speed Steel



		M6 × 1 mm	11/16"	2 7/8"	5	0.197"	135°	1/4"	Spiral	2	Metric	D5	VersaDrive Hex	7/16"	Holemaker Technology	9672N22	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use reamers, taps, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
Quick-Change Pull-Back Tool Release



		1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000


		Strong-Hold Push-Forward Tool Release



				3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


				1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
				3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Impact Wrench Taps

Thread holes 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

						Drill Bit		Shank		Taper Chamfer
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	No. of Flutes	Size, mm	Decimal Size Equiv.	Type	Size		Each
Hardened High-Speed Steel







				Titanium Nitride (TiN) Coated

				M6 × 1 mm	25/32"	2 9/32"	Metric	4	5	0.1968"	VersaDrive Hex	7/16"	9618N21	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

	For Shank
For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each







			Quick-Change Pull-Back Tool Release

			1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000




					Strong-Hold Push-Forward Tool Release

					3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


					1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
					3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000