Filter by
System of Measurement
ID
Material
Installation Permanence
Reamer Diameter
For Drill Bit Size Decimal Equivalent
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Hardness
Drill Bushing Type
Drill Bushing Texture
REACH
RoHS
Reamer Gauge Size
Press-Fit Drill Bushings
 |  |
Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings.
Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.
Don't see the size you need? Additional sizes are available.
Tolerance | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | For Drill Bit Size Decimal Equiv. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-9 | 10-49 | 50-Up | |||
0.0595" ID | |||||||||||||||
| 3/16" | 1/4" | 53 Ga. | 0.0595" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 8491A652 | 000000 | 000000 | 000000 | ||
| 3/16" | 3/8" | 53 Ga. | 0.0595" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 3671N111 | 00000 | 00000 | 00000 | ||
| 3/16" | 1/2" | 53 Ga. | 0.0595" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 3671N112 | 00000 | 00000 | 00000 | ||
| 13/64" | 1/2" | 53 Ga. | 0.0595" | 0.0001" to 0.0004" | 0.0012" to 0.0015" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 96511A179 | 00000 | 00000 | 00000 | ||
| 13/64" | 3/4" | 53 Ga. | 0.0595" | 0.0001" to 0.0004" | 0.0012" to 0.0015" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 96511A180 | 00000 | 00000 | 00000 | ||
Press-Fit Reamer Bushings
 |  |
With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation. Also known as headless bushings, these ANSI-type P bushings don’t need counterboring to be mounted flush. They are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
For Reamer | Tolerance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Lg. | Dia. | Gauge Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | Each | ||
| 0.0595" | 5/32" | 1/4" | 0.0595" | 53 Ga. | 0.0005" to 0.0008" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 9473N111 | 000000 | |
