McMaster-Carr logo
    Filter by
    System of Measurement
    ID
    Attribute Image
    Shaft Diameter
    Attribute Image
    Plain Bearing Type
    For Housing ID
    Attribute Image
    Shaft Mount Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Flange Thickness
    Reamer Diameter
    Lubricant
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    43 Products

    Press-Fit Reamer Bushings

    Image of ProductInUse. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation. Also known as headless bushings, these ANSI-type P bushings don’t need counterboring to be mounted flush. They are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
    Tolerance
    ID
    OD
    Lg.
    For Reamer
    Dia.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Each
    0.3135"1/2"1/2"0.3135"0.0006" to 0.001"0.0014" to 0.0017"-0.01" to 0.01"PSteelRockwell C619473N32100000

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/16"3/8"1/4"125 lb. @ 120 rpm-50 to 7009368T4500000
    5/16"3/8"3/8"185 lb. @ 120 rpm-50 to 7009368T460000
    5/16"3/8"1/2"250 lb. @ 120 rpm-50 to 7009368T1150000
    5/16"3/8"5/8"310 lb. @ 120 rpm-50 to 7009368T1160000
    5/16"3/8"3/4"370 lb. @ 120 rpm-50 to 7009368T1170000
    5/16"3/8"1"500 lb. @ 120 rpm-50 to 7009368T1180000
    5/16"7/16"1/4"125 lb. @ 120 rpm-50 to 7009368T1190000
    5/16"7/16"3/8"185 lb. @ 120 rpm-50 to 7009368T470000
    5/16"7/16"1/2"250 lb. @ 120 rpm-50 to 7009368T480000
    5/16"7/16"5/8"310 lb. @ 120 rpm-50 to 7009368T490000
    5/16"7/16"3/4"370 lb. @ 120 rpm-50 to 7009368T1210000
    5/16"7/16"1"500 lb. @ 120 rpm-50 to 7009368T1220000
    5/16"1/2"3/8"185 lb. @ 120 rpm-50 to 7009368T1230000
    5/16"1/2"1/2"250 lb. @ 120 rpm-50 to 7009368T1240000
    5/16"1/2"3/4"370 lb. @ 120 rpm-50 to 7009368T1250000
    5/16"1/2"1"500 lb. @ 120 rpm-50 to 7009368T1260000
    5/16"1/2"1 1/4"620 lb. @ 120 rpm-50 to 7009368T1270000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    Certificate
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Type
    Form
    Each
    841 Bearing Bronze
    5/16"7/16"3/8"9/16"1/16"230 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K45300000
    5/16"7/16"3/8"9/16"1/16"230 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-35 to 300Material Certificate
    		Paper
    		3113K540000
    5/16"7/16"1/2"9/16"1/16"310 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K4520000
    5/16"7/16"3/4"9/16"1/16"460 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K4540000
     
    High-Load 863 Iron Copper
    5/16"7/16"7/8"9/16"1/16"970 lb. @ 120 rpm330 lb. @ 120 rpmSynthetic Oil-15 to 300——2938T7340000
    5/16"9/16"1/2"11/16"1/16"550 lb. @ 120 rpm470 lb. @ 120 rpmSynthetic Oil-15 to 300——2938T3300000
    5/16"9/16"3/4"11/16"1/16"830 lb. @ 120 rpm470 lb. @ 120 rpmSynthetic Oil-15 to 300——2938T3400000
     

    Easy-Install Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Easy-Install Dry-Running Flanged Sleeve Bearings.
    A gap running along the length of these bearings allows you to quickly squeeze them into a housing—no tools required. Made of naturally slippery plastic, there’s no need to add messy oil that could drip and attract dust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    Nylon
    5/16"3/8"11/32"1/2"1/32"32 lb. @ 40 rpm35 lb. @ 40 rpmWhite0 to 2001281N1300000
    5/16"3/8"15/32"1/2"1/32"43 lb. @ 40 rpm35 lb. @ 40 rpmWhite0 to 2001281N140000
    5/16"3/8"21/32"1/2"1/32"60 lb. @ 40 rpm35 lb. @ 40 rpmWhite0 to 2001281N150000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/16"3/8"5/16"195 lb. @ 120 rpmMineral Oil10 to 2206391K33700000
    5/16"7/16"1 1/8"700 lb. @ 120 rpmMineral Oil10 to 2206391K3380000
    5/16"7/16"1 1/4"780 lb. @ 120 rpmMineral Oil10 to 2206391K3390000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/16"7/16"3/8"9/16"1/16"185 lb. @ 120 rpm270 lb. @ 120 rpm-50 to 7009440T1500000
    5/16"7/16"1/2"9/16"1/16"250 lb. @ 120 rpm270 lb. @ 120 rpm-50 to 7009440T360000
    5/16"7/16"3/4"9/16"1/16"370 lb. @ 120 rpm270 lb. @ 120 rpm-50 to 7009440T530000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/16"7/16"3/8"9/16"1/16"230 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K32100000
    5/16"7/16"1/2"9/16"1/16"310 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3220000
    5/16"7/16"3/4"9/16"1/16"460 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3230000
    5/16"1/2"3/8"11/16"1/16"230 lb. @ 120 rpm580 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3240000
     

    Dry-Running Mounted Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Mounted Bearings. Dry-Running Mounted Sleeve Bearings.
    Leave the lubricant in the supply closet—these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.
    Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.
    Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.
    Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
    Overall
    For Shaft
    Dia.
    Ctr.
    Ht.
    Lg.
    Wd.
    Dynamic Radial Load
    Cap. @ Speed
    Misalignment
    Capability
    Each
    Acetal Bearing with Aluminum Housing
    5/16"9/16"2 1/4"7/16"41 lb. @ 120 rpm5°4393N13000000
     

    Light Duty Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange

    Image of Product. Front orientation. Contains Annotated. Mounted Bearings. Light Duty Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange.
    With simple, lightweight designs, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. Inside, the sleeve is made of naturally slick plastic that doesn't require lubrication. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing.
    Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.
    Steel Housing—Best for dry environments as moisture will cause them to rust.
    Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
    Overall
    For Shaft
    Dia.
    Lg.
    Wd.
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Misalignment
    Capability
    Each
    Ultra-Low-Friction PTFE-Filled Acetal Bearing with Steel Housing
    5/16"2 3/32"25/64"1/16"70 lb. @ 120 rpm5°5792N13000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Food Industry Std.
    Each
    841 Bearing Bronze
    5/16"7/16"3/8"9/16"1/16"230 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K600000
     

    Dry-Running Panel-Mount Sleeve Bearings

    Image of Product. Front orientation. Mounted Bearings. Dry-Running Panel-Mount Sleeve Bearings.
    Leave the lubricant in the supply closet—these low-maintenance sleeve bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings withstand grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. They mount securely in thin panels.
    Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.
    Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.
    Steel Housing—Best for dry environments as moisture will cause them to rust.
    Press-Fit Panel Mount—Press these bearings into plastic panels or thin sheet metal to mount them by hand. They're a good fit for tight spaces, or if you'd like a removable mounting option. The sturdy flange prevents bearings from pulling through, giving you added stability.
    Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
    For Shaft
    Dia.
    OD
    Wd.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Misalignment
    Capability
    Each
    Acetal Bearing with Steel Housing
     
    Press-Fit Panel Mount
    5/16"0.625"7/16"11/16"1/32"41 lb. @ 120 rpm5°5168N1200000
     
    Ultra-Low-Friction PTFE-Filled Acetal Bearing with Steel Housing
     
    Press-Fit Panel Mount
    5/16"0.625"7/16"11/16"1/32"95 lb. @ 120 rpm5°5169N1200000
     
    back to top