0.5005" ID Drill Bushings

With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation. Also known as headless bushings, these ANSI-type P bushings don’t need counterboring to be mounted flush. They are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.

				Tolerance
ID	OD	Lg.	For Reamer Dia.	ID	OD	Lg.	Drill Bushing Type	Material	Hardness		Each
0.5005"	3/4"	1"	0.5005"	0.0006" to 0.001"	0.0015" to 0.0018"	-0.01" to 0.01"	P	Steel	Rockwell C61	9473N369	000000

Dry-Running Metal-Reinforced Plastic Sleeve Bearings

Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

PTFE with 17-4 PH Stainless Steel Shell—The highest load capacity of any sleeve bearing we offer. 17-4 PH stainless steel offers good corrosion resistance but is heavier than aluminum.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F	Specs. Met		Each
PTFE with 17-4 PH Stainless Steel Shell



	1/2"	5/8"	3/16"	1,400 lb. @ 40 rpm	-60 to 320	SAE AS81820, SAE AS81934, MIL-B-81820, MIL-B-81934	5445K5	000000


	1/2"	5/8"	11/32"	2,600 lb. @ 40 rpm	-60 to 320	SAE AS81820, SAE AS81934, MIL-B-81820, MIL-B-81934	5445K6	00000
	1/2"	5/8"	3/8"	2,850 lb. @ 40 rpm	-60 to 320	SAE AS81820, SAE AS81934, MIL-B-81820, MIL-B-81934	5445K7	00000
	1/2"	5/8"	7/16"	3,300 lb. @ 40 rpm	-60 to 320	SAE AS81820, SAE AS81934, MIL-B-81820, MIL-B-81934	5445K8	00000
	1/2"	5/8"	7/8"	6,650 lb. @ 40 rpm	-60 to 320	SAE AS81820, SAE AS81934, MIL-B-81820, MIL-B-81934	5445K9	00000

Oil-Embedded Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1/2"	5/8"	5/16"	310 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K736	00000


	1/2"	5/8"	3/8"	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K211	0000
	1/2"	5/8"	7/16"	430 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K734	0000
	1/2"	5/8"	1/2"	500 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K212	0000
	1/2"	5/8"	9/16"	560 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K213	0000
	1/2"	5/8"	5/8"	620 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K216	0000
	1/2"	5/8"	11/16"	680 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K735	0000
	1/2"	5/8"	3/4"	750 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K214	0000
	1/2"	5/8"	7/8"	870 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K408	0000
	1/2"	5/8"	1"	1,000 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K215	0000
	1/2"	5/8"	1 1/8"	1,100 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K409	0000


	1/2"	5/8"	1 1/4"	1,250 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K217	0000
	1/2"	5/8"	1 1/2"	1,500 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K411	0000
	1/2"	5/8"	3"	3,000 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K1	00000
	1/2"	11/16"	3/8"	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K738	0000
	1/2"	11/16"	1/2"	500 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K196	0000
	1/2"	11/16"	5/8"	620 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K197	0000
	1/2"	11/16"	3/4"	750 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K198	0000
	1/2"	11/16"	7/8"	870 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K739	0000
	1/2"	11/16"	1"	1,000 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K199	0000
	1/2"	11/16"	1 1/8"	1,100 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K201	0000


	1/2"	11/16"	1 1/4"	1,250 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K741	0000
	1/2"	11/16"	1 1/2"	1,500 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6391K737	0000


	High-Load 863 Iron Copper



			1/2"	11/16"	1/2"	550 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T113	0000


			1/2"	11/16"	5/8"	690 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T114	0000
			1/2"	11/16"	3/4"	830 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T115	0000
			1/2"	11/16"	1"	1,100 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T116	0000
			1/2"	11/16"	1 1/8"	1,250 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T117	0000

High-Temperature Graphite-Lubricated Sleeve Bearings

Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

High-Load Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	1/2"	5/8"	1"	1,750 lb. @ 120 rpm	-350 to 450	6405K401	000000


	1/2"	3/4"	1 1/2"	2,600 lb. @ 120 rpm	-350 to 450	6405K402	00000


	High-Load Chemical-Resistant 954 Bearing Bronze



			1/2"	3/4"	1/2"	970 lb. @ 120 rpm	-350 to 500	2927T46	00000