1.25" ID Drill Bushings | McMaster-Carr

Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings.

Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.

Don't see the size you need? Additional sizes are available.

					Tolerance							Each
	OD	Lg.	For Drill Bit Size	For Drill Bit Size Decimal Equiv.	ID	OD	Lg.	Drill Bushing Type	Material	Hardness		1-9	10-49	50-Up
1.25" ID



		1 1/2"	3/4"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N218	000000	000000	000000


		1 1/2"	1"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.01" to 0.01"	P	Steel	Rockwell C61	8491A832	00000	00000	00000
		1 1/2"	1 1/4"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N219	00000	00000	00000
		1 1/2"	1 1/2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N22	00000	00000	00000
		1 1/2"	2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.01" to 0.01"	P	Steel	Rockwell C61	8491A833	00000	00000	00000
		1 1/2"	2 1/4"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N221	00000	00000	00000
		1 5/8"	1"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N222	00000	00000	00000
		1 5/8"	1 3/8"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N223	00000	00000	00000
		1 5/8"	2 1/2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N224	00000	00000	00000
		1 5/8"	3"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0018" to 0.0022"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N225	00000	00000	00000
		1 3/4"	3/4"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	8491A764	00000	00000	00000


		1 3/4"	1"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	8491A72	00000	00000	00000
		1 3/4"	1 3/8"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	8491A765	00000	00000	00000
		1 3/4"	1 1/2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	8491A766	00000	00000	00000
		1 3/4"	1 3/4"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.01" to 0.01"	P	Steel	Rockwell C61	99815A025	00000	00000	00000
		1 3/4"	2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N226	00000	00000	00000
		1 3/4"	2 1/8"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.01" to 0.01"	P	Steel	Rockwell C61	99815A026	00000	00000	00000
		1 3/4"	2 1/2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.01" to 0.01"	P	Steel	Rockwell C61	99815A027	00000	00000	00000
		1 3/4"	3"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.01" to 0.01"	P	Steel	Rockwell C61	99815A028	00000	00000	00000
		2"	1 1/2"	1 1/4"	1.25"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	P	Steel	Rockwell C61	3671N227	00000	00000	00000

Press-Fit Drill Bushings with Head


Shown in Countersunk Hole	Shown in Standard Hole

A flanged head on these bushings acts as a stop, so they won’t press through your jig even under extreme drilling pressure. They’re ANSI Type H bushings, also known as headed bushings. The head adds support and protects the jig from damage caused by heavy use, so they’re often used in jigs made of thin or soft materials. These bushings guide your drill bit, reamer, or other cutting bit to create accurate, consistent holes from one workpiece to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, they hold their shape and resist wear, so they last for many cycles without needing to be replaced.

To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into place with a hydraulic or lever press.

Don't see the size you need? Additional sizes are available.

					Head		Tolerance							Each
	OD	Lg.	For Drill Bit Size	For Drill Bit Size Decimal Equiv.	OD	Thk.	ID	OD	Lg.	Drill Bushing Type	Material	Hardness		1-5	6-11	12-Up
1.25" ID



		1 3/4"	3/4"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A076	000000	000000	000000


		1 3/4"	1"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A077	00000	00000	00000
		1 3/4"	1 3/8"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A238	00000	00000	00000
		1 3/4"	1 1/2"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A239	00000	00000	00000
		1 3/4"	1 3/4"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A244	00000	00000	00000
		1 3/4"	2 1/8"	1 1/4"	1.25"	1 63/64"	3/8"	0.0002" to 0.0006"	0.0019" to 0.0023"	-0.015" to 0.015"	H	Steel	Rockwell C61	8492A245	00000	00000	00000

Removable Drill Bushings

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves (sold separately). By swapping in a bushing with a different ID, you can change the size of your bit and still use the same hole in your fixture. All are made to tight dimensional tolerances for consistent, accurate results, even as you change them in and out. They're also known as slip-fixed and renewable bushings.

Choose a sleeve with a length that matches the length of your bushing. To prevent bushings from spinning inside the sleeve as you drill, pair a standard sleeve with a lock screw, or use a locking sleeve. For faster placement in and removal from sleeves, use a handle.

					Head			Tolerance							Each
	OD	Lg.	For Drill Bit Size	For Drill Bit Size Decimal Equiv.	OD	Thk.	Lock Screw/Bushing Ctr.-to-Ctr.	ID	OD	Lg.	Drill Bushing Type	Material	Hardness		1-5	6-11	12-Up
1.25" ID



		1 3/4"	3/4"	1 1/4"	1.25"	2 19/64"	3/8"	1 25/64"	0.0002" to 0.0006"	-0.0003" to 0"	-0.015" to 0.015"	SF	Steel	Rockwell C61	8493A164	000000	000000	000000


		1 3/4"	1"	1 1/4"	1.25"	2 19/64"	3/8"	1 25/64"	0.0002" to 0.0006"	-0.0003" to 0"	-0.015" to 0.015"	SF	Steel	Rockwell C61	8493A165	00000	00000	00000
		1 3/4"	1 1/2"	1 1/4"	1.25"	2 19/64"	3/8"	1 25/64"	0.0002" to 0.0006"	-0.0003" to 0"	-0.015" to 0.015"	SF	Steel	Rockwell C61	8493A173	00000	00000	00000
		1 3/4"	1 3/4"	1 1/4"	1.25"	2 19/64"	3/8"	1 25/64"	0.0002" to 0.0006"	-0.0003" to 0"	-0.015" to 0.015"	SF	Steel	Rockwell C61	8493A174	00000	00000	00000
		1 3/4"	2 1/2"	1 1/4"	1.25"	2 19/64"	3/8"	1 25/64"	0.0002" to 0.0006"	-0.0003" to 0"	-0.015" to 0.015"	SF	Steel	Rockwell C61	8493A176	00000	00000	00000

Drill Bushing Lock Screws


Slotted Drive	Hex Drive

Lock screws thread into a hole in your jig. The head of the screw fits into a notch on the bushing's head, which keeps the bushing from spinning.

						Shoulder
	For Bushing OD	Thread Size	Head OD	Overall Lg.	Head-to-Shoulder Lg.	Lg.	Wd.	Hex Size	For Drill Bushing Type	Material	Pkg. Qty.		Pkg.
Slotted Drive



		1 3/4", 2 1/4"	3/8"-16	3/4"	1"	3/8"	0.2"	7/16"	—	SF	Steel	10	8496A16	000000


		Hex Drive



				1 3/4", 2 1/4"	3/8"-16	3/4"	1"	3/8"	0.2"	7/16"	7/32"	SF	Steel	10	8496A33	00000

Dry-Running Sleeve Bearings

Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon and will swell and weaken when exposed to moisture.

Moisture-Resistant Acetal—These bearings won’t warp or swell from humidity or direct contact with water, unlike nylon.

Ultra-Chemical-Resistant PTFE—The most chemical-resistant bearings we offer. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. PTFE also reduces friction better than nylon but is not as strong.

Ultra-Chemical-Resistant Glass-Filled PTFE—Adding glass to PTFE improves its strength without affecting its chemical resistance. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. While the glass fibers reinforce the PTFE, they might also increase friction.

								Each
	For Shaft Dia.	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F		1-24	25-99	100-Up
MDS-Filled Nylon



		1 1/4"	1 1/2"	2"	760 lb. @ 30 rpm	Black	-40 to 170	6294K106	000000	000000	000000


		Moisture-Resistant Acetal



				1 1/4"	1 1/2"	1"	340 lb. @ 30 rpm	White	-20 to 180	2610T43	00000	00000	0000


				1 1/4"	1 1/2"	1 1/2"	510 lb. @ 30 rpm	White	-20 to 180	2610T44	00000	00000	00000
				1 1/4"	1 1/2"	2"	680 lb. @ 30 rpm	White	-20 to 180	2610T45	00000	00000	00000


				Ultra-Chemical-Resistant PTFE



						1 1/4"	1 1/2"	1"	125 lb. @ 30 rpm	White	-350 to 500	2639T43	00000	00000	00000


						1 1/4"	1 1/2"	1 1/2"	190 lb. @ 30 rpm	White	-350 to 500	2639T44	00000	00000	00000
						1 1/4"	1 1/2"	2"	250 lb. @ 30 rpm	White	-350 to 500	2639T45	00000	00000	00000


						Ultra-Chemical-Resistant Glass-Filled PTFE



								1 1/4"	1 1/2"	3/4"	930 lb. @ 30 rpm	White	-350 to 500	2803T35	00000	00000	00000


								1 1/4"	1 1/2"	1"	1,250 lb. @ 30 rpm	White	-350 to 500	2803T36	00000	00000	00000
								1 1/4"	1 1/2"	1 1/2"	1,850 lb. @ 30 rpm	White	-350 to 500	2803T37	00000	00000	00000

Flanged Sleeve Bearings

These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

High-Load Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.

									Certificate
	For Shaft Dia.	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F	Type	Form		Each
High-Load 932 Bearing Bronze



		1 1/4"	1 1/2"	1/2"	1 11/16"	1/8"	2,500 lb. @ 30 rpm	4,000 lb. @ 30 rpm	-350 to 450	—	—	7815K833	00000


		1 1/4"	1 1/2"	3/4"	1 11/16"	1/8"	3,750 lb. @ 30 rpm	4,000 lb. @ 30 rpm	-350 to 450	—	—	7815K834	00000
		1 1/4"	1 1/2"	1"	1 3/4"	3/16"	5,000 lb. @ 30 rpm	4,700 lb. @ 30 rpm	-350 to 450	—	—	7815K68	00000
		1 1/4"	1 1/2"	1"	1 3/4"	3/16"	5,000 lb. @ 30 rpm	4,700 lb. @ 30 rpm	-70 to 450	Material Certificate	Paper	91786A615	00000
		1 1/4"	1 1/2"	1 1/4"	1 3/4"	3/16"	6,250 lb. @ 30 rpm	4,700 lb. @ 30 rpm	-350 to 450	—	—	7815K69	00000
		1 1/4"	1 1/2"	1 1/2"	1 3/4"	3/16"	7,500 lb. @ 30 rpm	4,700 lb. @ 30 rpm	-350 to 450	—	—	7815K71	00000


		High-Load Chemical-Resistant 954 Bearing Bronze



				1 1/4"	1 1/2"	1"	1 3/4"	3/16"	5,600 lb. @ 30 rpm	5,300 lb. @ 30 rpm	-350 to 500	—	—	2934T62	00000


				1 1/4"	1 1/2"	1 1/4"	1 3/4"	3/16"	7,000 lb. @ 30 rpm	5,300 lb. @ 30 rpm	-350 to 500	—	—	2934T63	00000
				1 1/4"	1 1/2"	1 1/2"	1 3/4"	3/16"	8,400 lb. @ 30 rpm	5,300 lb. @ 30 rpm	-350 to 500	—	—	2934T64	00000

Dry-Running Flanged Sleeve Bearings for Food and Beverage

Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.

Oil-Filled Moisture-Resistant UHMW Polyethylene—Oil can’t seep out because it is locked inside the bearing. These bearings are slicker than standard UHMW polyethylene thanks to an infusion of oil that reduces friction. Virtually nonabsorbent, these bearings will keep their shape after washdowns. However, they aren’t suitable for high-temperature treatments such as steam cleaning.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Food Industry Std.		Each
Oil-Filled Moisture-Resistant UHMW Polyethylene



	1 1/4"	1 11/32"	1 5/16"	1 7/8"	1/16"	330 lb. @ 30 rpm	205 lb. @ 30 rpm	Gray	-200 to 180	FDA Compliant 21 CFR 177.1520	5476N22	000000

Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	1 1/4"	1 1/2"	3/4"	3,750 lb. @ 30 rpm	-350 to 450	6381K569	00000


	1 1/4"	1 1/2"	1"	5,000 lb. @ 30 rpm	-350 to 450	6381K261	0000
	1 1/4"	1 1/2"	1 1/4"	6,250 lb. @ 30 rpm	-350 to 450	6381K57	0000
	1 1/4"	1 1/2"	1 1/2"	7,500 lb. @ 30 rpm	-350 to 450	6381K262	0000
	1 1/4"	1 1/2"	2"	10,000 lb. @ 30 rpm	-350 to 450	6381K263	0000
	1 1/4"	1 1/2"	2 1/2"	12,500 lb. @ 30 rpm	-350 to 450	6381K571	00000
	1 1/4"	1 1/2"	3"	15,000 lb. @ 30 rpm	-350 to 450	6381K264	00000
	1 1/4"	1 1/2"	4"	20,000 lb. @ 30 rpm	-350 to 450	6381K265	00000


	High-Load Chemical-Resistant 954 Bearing Bronze



			1 1/4"	1 1/2"	1 1/4"	7,000 lb. @ 30 rpm	-350 to 500	2867T237	00000

Dry-Running Metal-Reinforced Plastic Sleeve Bearings

Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Bronze-Backed PTFE with Steel Shell—A good all-around, economical choice. Although these bearings are stronger than aluminum, they can only be used in dry environments where corrosion is not a concern.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
Bronze-Backed PTFE with Steel Shell



	1 1/4"	1 13/32"	3/4"	4,850 lb. @ 30 rpm	-320 to 530	60695K27	00000

Grooved Sleeve Bearings

A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	1 1/4"	1 1/2"	1"	4,350 lb. @ 30 rpm	-350 to 450	7965K45	000000


	1 1/4"	1 1/2"	1 1/2"	6,550 lb. @ 30 rpm	-350 to 450	7965K49	00000
	1 1/4"	1 1/2"	2"	8,750 lb. @ 30 rpm	-350 to 450	7965K48	00000
	1 1/4"	1 1/2"	3"	13,100 lb. @ 30 rpm	-350 to 450	7965K47	00000
	1 1/4"	1 1/2"	4"	17,500 lb. @ 30 rpm	-350 to 450	7965K46	00000


	High-Load Chemical-Resistant 954 Bearing Bronze



			1 1/4"	1 1/2"	1 1/2"	7,300 lb. @ 30 rpm	-350 to 500	2924T62	00000


			1 1/4"	1 1/2"	2"	9,750 lb. @ 30 rpm	-350 to 500	2924T63	00000

Dry-Running Flanged Sleeve Bearings

Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.

MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon, which will swell and weaken when exposed to moisture.

Moisture-Resistant Acetal—These bearings won’t warp or swell from humidity or direct contact with water, unlike nylon.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Food Industry Std.	Specs. Met		Each
Nylon



	1 1/4"	1 1/2"	1"	1 3/4"	1/8"	380 lb. @ 30 rpm	250 lb. @ 30 rpm	White	-20 to 210	—	—	6389K463	000000


	1 1/4"	1 1/2"	2"	1 3/4"	1/8"	760 lb. @ 30 rpm	250 lb. @ 30 rpm	White	-20 to 210	—	—	6389K464	00000


	MDS-Filled Nylon



			1 1/4"	1 1/2"	1 1/2"	1 3/4"	1/8"	570 lb. @ 30 rpm	250 lb. @ 30 rpm	Black	-40 to 170	—	—	6294K244	00000


			Moisture-Resistant Acetal



					1 1/4"	1 1/2"	1"	1 3/4"	1/8"	340 lb. @ 30 rpm	230 lb. @ 30 rpm	White	-40 to 180	—	—	2705T85	00000


					1 1/4"	1 1/2"	1 1/2"	1 3/4"	1/8"	510 lb. @ 30 rpm	230 lb. @ 30 rpm	White	-20 to 180	—	—	2705T45	00000
					1 1/4"	1 1/2"	2"	1 3/4"	1/8"	680 lb. @ 30 rpm	230 lb. @ 30 rpm	White	-40 to 180	—	—	2705T86	00000


					Ultra-Chemical-Resistant PTFE



							1 1/4"	1 1/2"	1 1/2"	1 3/4"	1/8"	190 lb. @ 30 rpm	85 lb. @ 30 rpm	White	-350 to 500	FDA Compliant 21 CFR 177.1550	ASTM D1710	2706T45	00000

Light Duty Dry-Running Mounted Sleeve Bearings

With simple, lightweight designs, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. The sleeve inside is made from naturally slick plastic, so there's no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds.

304 Stainless Steel Housing—Made of thin pressed metal, these housings prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.

UHMW Polyethylene Housing—Virtually impervious to moisture, these solid plastic housings keep their shape during washdowns. However, they aren't suitable for steam cleanings and other high-temperature treatments.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
UHMW Polyethylene Bearing with 304 Stainless Steel Housing



		1 1/4"	1 1/16"	4 9/16"	1 1/2"	380 lb. @ 30 rpm	3°	6252K48	000000


		UHMW Polyethylene Bearing with UHMW Polyethylene Housing



				1 1/4"	1 7/8"	6 1/2"	1 3/4"	440 lb. @ 30 rpm	—	6254K25	00000

Mounted Sleeve Bearings

A reliable classic, these simple sleeve bearings are made from babbitt, a tough, corrosion-resistant alloy. With no moving parts, they withstand dusty, dirty environments better than ball or roller bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Lubricate regularly through the port on top to keep your bearing running smoothly. The grooves distribute lubrication evenly across the bearing's surface.

Powder-Coated Cast Iron Housing—A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed		Each
Babbitt Bearing with Powder-Coated Cast Iron Housing



		1 1/4"	1 3/8"	5"	2 1/2"	430 lb. @ 30 rpm	6359K19	0000000

Vibration-Damping Oil-Embedded Mounted Sleeve Bearings

Soak up vibrations to muffle the rumbles from heavy machinery. The rubber layer on the inside of these simple sleeve bearings flexes to align the shaft and reduce rattling. They're often used with compressors and other equipment that suddenly starts and stops. Made from porous, oil-saturated bronze, these bearings release their own lubrication on startup, reducing the need for frequent relubrication.

With no moving parts, sleeve bearings stand up to dusty, dirty conditions better than ball bearings. However, with more friction generated, they're less effective at high speeds.

Steel Housing—Best for dry environments as moisture will cause them to rust.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
841 Bearing Bronze Bearing with Steel Housing



		1 1/4"	1 1/16"	6"	1 3/4"	4,350 lb. @ 30 rpm	3°	7930K18	000000

Easy-Access Mounted Sleeve Bearings

Lift the top off to install, inspect, and maintain your shaft without full disassembly. Inside, the sleeve is made from babbitt, a tough, corrosion-resistant alloy. With no moving parts, sleeve bearings stand up to dusty, dirty environments better than ball or roller bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Lubricate regularly through the housing's lubrication port to keep your bearing in tip-top shape. The grooves help to evenly distribute lubrication across the bearing's surface.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed		Each
Babbitt Bearing with Powder-Coated Cast Iron Housing



		1 1/4"	1 1/4"	5 1/4"	2 1/2"	430 lb. @ 30 rpm	6359K39	0000000