Minimize runout and slippage under heavy cutting forces from drill presses and Bridgeport milling machines. These chucks have an integrated arbor for a one-piece design that makes them more accurate and compact than chucks with a separate arbor. Made of hardened steel, they resist wear from repeated use. They thread onto your machine’s drawbar for a secure connection.

To maximize grip and minimize runout, choose a chuck where your drill bit diameter falls in the middle of the bit shank size range.

Keyless chucks let you swap bits in and out with a quick twist of the sleeve. As torque increases, their grip will tighten. These chucks only tighten in the clockwise direction, so they may loosen under heavy reverse loads, such as during left-hand drilling.

Keyed chucks use a worm-and-gear design to deliver exceptional grip on bits for the highest torque and accuracy when drilling in hard materials. They're so strong they can even be used for light duty milling in soft materials such as aluminum. Use their Torx key to tighten and loosen the chuck.

McMaster-Carr approved chucks are made on the same equipment that once produced Jacobs chucks in Europe, so you get high-quality performance without the brand-name price.

Albrecht chucks are known for their unmatched quality. Made in Germany, every chuck undergoes multiple inspections and tests to ensure they operate smoothly and keep your bits aligned over their long life.

Cut down on runout and slippage under heavy cutting forces from lathes and milling machines. These chucks have an integrated arbor for a one-piece design that makes them more accurate and compact than chucks with a separate arbor. Made of hardened steel, they resist wear from repeated use. They’re keyless, so you can swap bits in and out with a quick twist of the sleeve. As torque increases, their grip will tighten.

To maximize grip and minimize runout, choose a chuck where your drill bit diameter falls in the middle of the bit shank size range.

McMaster-Carr approved chucks are made on the same equipment that once produced Jacobs chucks in Europe, so you get high-quality performance without the brand-name price.

Albrecht chucks are known for their unmatched quality. Made in Germany, every chuck undergoes multiple inspections and tests to ensure they operate smoothly and keep your bits aligned over their long life.

Limit runout and slippage under heavy cutting forces from CNC machines. These chucks have an integrated arbor for a one-piece design that makes them more accurate and compact than chucks with a separate arbor. Made of hardened steel, they resist wear from repeated use. Their shank is precision ground to the industry standard AT3 tolerance for a tight fit in your spindle. They meet JIS or MAS standards for compatibility across machines with BT spindles. They have a threaded hole that accepts retention knobs, so they connect to your machine’s drawbar system.

Keyed chucks use a worm-and-gear design to deliver exceptional grip on bits for the highest torque and accuracy when drilling in hard materials. They're so strong they can even be used for light duty milling in soft materials such as aluminum. Use their Torx key to tighten and loosen the chuck. Balanced to G 2.5, they vibrate 60% less than chucks balanced to G 6.3 for longer life under heavy use and high speeds. You can route coolant through these chucks to extend the life of your bit and clear chips. For automatic tool identification and tracking, they have a hole for a small RFID tag.

Reduce runout and slippage under heavy cutting forces from CNC machines. These chucks have an integrated arbor for a one-piece design that makes them more accurate and compact than chucks with a separate arbor. Made of hardened steel, they resist wear from repeated use. Their shank is precision ground to the industry standard AT3 tolerance for a tight fit in your spindle. They meet ANSI/ASME standards for compatibility across machines with CAT spindles. They have a threaded hole that accepts retention knobs, so they connect to your machine’s drawbar system. For automatic tool identification and tracking, these chucks have a hole for a small RFID tag.

To maximize grip and minimize runout, choose a chuck where your drill bit diameter falls in the middle of the bit shank size range.

Keyed chucks use a worm-and-gear design to deliver exceptional grip on bits for the highest torque and accuracy when drilling in hard materials. They're so strong they can even be used for light duty milling in soft materials such as aluminum. Use their Torx key to tighten and loosen the chuck. Balanced to G 2.5, they vibrate 60% less than chucks balanced to G 6.3 for longer life under heavy use and high speeds. You can route coolant through these chucks to extend the life of your bit and clear chips.