About Sanding Abrasives
More
Sanding Sleeve Drums for Hand-Held Power Tools
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
For technical drawings and 3-D models, click on a part number.
Drum | ||||||
|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Each | |
| 1/4" | 1/2" | 1/8" | Rubber | 30,000 | 0000000 | 00000 |
| 1/4" | 3/4" | 1/8" | Rubber | 22,000 | 0000000 | 0000 |
| 1/4" | 1" | 1/8" | Rubber | 20,000 | 0000000 | 0000 |
| 3/8" | 1/2" | 1/8" | Rubber | 30,000 | 0000000 | 0000 |
| 3/8" | 1" | 1/8" | Rubber | 18,000 | 0000000 | 0000 |
| 1/2" | 1/2" | 1/8" | Rubber | 30,000 | 000000 | 0000 |
| 1/2" | 1/2" | 1/4" | Rubber | 30,000 | 0000000 | 0000 |
| 1/2" | 3/4" | 1/8" | Rubber | 18,000 | 0000000 | 0000 |
| 1/2" | 3/4" | 1/4" | Rubber | 25,000 | 0000000 | 0000 |
| 1/2" | 1" | 1/4" | Rubber | 20,000 | 0000000 | 0000 |
| 1/2" | 1 1/2" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1/2" | 2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 5/8" | 1/2" | 1/4" | Rubber | 27,000 | 0000000 | 0000 |
| 5/8" | 1" | 1/4" | Rubber | 19,000 | 0000000 | 0000 |
| 3/4" | 1/2" | 1/4" | Rubber | 27,000 | 0000000 | 0000 |
| 3/4" | 3/4" | 1/4" | Rubber | 24,000 | 0000000 | 0000 |
| 3/4" | 1" | 1/4" | Rubber | 19,000 | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | Rubber | 12,000 | 0000000 | 0000 |
| 3/4" | 2" | 1/4" | Rubber | 9,000 | 0000000 | 0000 |
| 1" | 1/2" | 1/4" | Rubber | 18,000 | 0000000 | 0000 |
| 1" | 3/4" | 1/4" | Rubber | 15,000 | 0000000 | 0000 |
| 1" | 1" | 1/4" | Rubber | 15,000 | 0000000 | 0000 |
| 1" | 1 1/2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 1" | 2" | 1/4" | Rubber | 8,000 | 0000000 | 0000 |
| 1" | 3" | 1/4" | Rubber | 5,000 | 0000000 | 00000 |
| 1 1/4" | 1" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1 1/4" | 2" | 1/4" | Rubber | 7,000 | 0000000 | 0000 |
| 1 1/2" | 1" | 1/4" | Rubber | 14,000 | 0000000 | 0000 |
| 1 1/2" | 1 1/2" | 1/4" | Rubber | 10,000 | 0000000 | 0000 |
| 1 1/2" | 2" | 1/4" | Rubber | 7,000 | 0000000 | 0000 |
| 2" | 1" | 1/4" | Rubber | 11,000 | 0000000 | 0000 |
| 2" | 1 1/2" | 1/4" | Rubber | 8,000 | 0000000 | 0000 |
| 2" | 2" | 1/4" | Rubber | 6,000 | 0000000 | 0000 |
| 3" | 1" | 1/4" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 1" | 3/8" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 2" | 1/4" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 2" | 3/8" | Rubber | 3,000 | 0000000 | 00000 |
| 3" | 3" | 3/8" | Rubber | 3,000 | 000000 | 00000 |
Quick-Change Sanding Sleeve Drums for Hand-Held Power Tools
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
For technical drawings and 3-D models, click on a part number.
Drum | ||||||
|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Each | |
| 1/2" | 1/2" | 1/8" | Rubber | 30,000 | 00000000 | 00000 |
| 1/2" | 1/2" | 1/4" | Rubber | 30,000 | 00000000 | 0000 |
| 1/2" | 3/4" | 1/4" | Rubber | 25,000 | 00000000 | 0000 |
| 1/2" | 1" | 1/4" | Rubber | 20,000 | 00000000 | 0000 |
| 1/2" | 1 1/2" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1/2" | 2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 5/8" | 1/2" | 1/4" | Rubber | 27,000 | 00000000 | 0000 |
| 5/8" | 1" | 1/4" | Rubber | 19,000 | 00000000 | 0000 |
| 3/4" | 1/2" | 1/4" | Rubber | 27,000 | 00000000 | 0000 |
| 3/4" | 3/4" | 1/4" | Rubber | 24,000 | 00000000 | 0000 |
| 3/4" | 1" | 1/4" | Rubber | 19,000 | 00000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | Rubber | 12,000 | 00000000 | 0000 |
| 3/4" | 2" | 1/4" | Rubber | 9,000 | 00000000 | 0000 |
| 1" | 1/2" | 1/4" | Rubber | 18,000 | 00000000 | 0000 |
| 1" | 3/4" | 1/4" | Rubber | 15,000 | 00000000 | 0000 |
| 1" | 1" | 1/4" | Rubber | 15,000 | 00000000 | 0000 |
| 1" | 1 1/2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 1" | 2" | 1/4" | Rubber | 8,000 | 00000000 | 0000 |
| 1" | 3" | 1/4" | Rubber | 5,000 | 00000000 | 00000 |
| 1 1/4" | 1" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1 1/4" | 2" | 1/4" | Rubber | 7,000 | 00000000 | 0000 |
| 1 1/2" | 1" | 1/4" | Rubber | 14,000 | 00000000 | 0000 |
| 1 1/2" | 1 1/2" | 1/4" | Rubber | 10,000 | 00000000 | 0000 |
| 1 1/2" | 2" | 1/4" | Rubber | 7,000 | 00000000 | 0000 |
| 2" | 1" | 1/4" | Rubber | 11,000 | 00000000 | 0000 |
| 2" | 1 1/2" | 1/4" | Rubber | 8,000 | 00000000 | 00000 |
| 2" | 2" | 1/4" | Rubber | 6,000 | 00000000 | 00000 |
| 3" | 1" | 1/4" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 1" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 2" | 1/4" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 2" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
| 3" | 3" | 3/8" | Rubber | 3,000 | 00000000 | 00000 |
Flap Sanding Sleeve Drums for Hand-Held Power Tools
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve. The shank on these drums installs directly into the collet of a grinder or the chuck on a hand-held drill. A drum is required to use a sanding sleeve.
For technical drawings and 3-D models, click on a part number.
Sanding Sleeve Drums for Dremel Hand-Held Power Tools
This drum is required to use a sanding sleeve with a Dremel grinder. Slide a sleeve on the drum and tighten the screw to expand the drum to securely hold the sleeve. Install the shank into the grinder’s collet.
Drum | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Drum Material | Max. Speed, rpm | Includes | For Manufacturer Model Number | Each | |
Dremel | ||||||||
| 1/2" | 1/2" | 1/8" | Rubber | 5,000 | One 60 Grit Sanding Sleeve | 100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200 | 0000000 | 00000 |
Sanding Sleeve Drums for Straight Shafts
Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
For technical drawings and 3-D models, click on a part number.
Drum | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | For Shaft Dia. | Drum Material | Max. Speed, rpm | Includes | Each | |
| 2" | 2" | 1/2" | Rubber | 6,000 | Set Screws | 0000000 | 000000 |
| 3" | 1" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 2" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 1/2" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 5/8" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
| 3" | 3" | 3/4" | Rubber | 3,000 | Set Screws | 0000000 | 00000 |
Sanding Sleeve Drums for Threaded Shafts
Install a sanding sleeve on the threaded shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
For technical drawings and 3-D models, click on a part number.
Sanding Drum and Sleeve Assortments
These assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Assortments with a quick-change attachment require no additional tools to switch out drums and sleeves. Twist the drum head by hand to tighten the sanding sleeve to the drum.
For technical drawings and 3-D models, click on a part number.
Sleeved Abrasive | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number of Pieces | Shank Dia. | Drum Material | Material | Backing Material | For Use On | Includes | Each | |
Assortments | ||||||||
| 7 | 3/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | two each of 50-, 80-, and 120-grit sleeves for each size drum (6 sleeves total) and One drum in this size (Dia. × Lg.): 3" × 3" | 0000000 | 000000 |
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3" and one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 0000000 | 00000 |
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 0000000 | 00000 |
| 20 | 1/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 3/8" × 1/2", 1/2" × 1/2", 1/2" × 3/4", 3/4" × 1/2", and 3/4" × 3/4" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
| 96 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Six drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", 2" x 1 1/2", and 3" × 1" and five each of 36-, 50-, and 120-grit sleeves for each size drum (90 sleeves total) | 0000000 | 000000 |
Assortments with Quick-Change Attachment | ||||||||
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3" and one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 0000000 | 00000 |
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 0000000 | 00000 |
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2" and one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 0000000 | 00000 |
Drum Sanders
Often used in woodworking shops to efficiently level and prep boards for paneling, these sanders create a smooth, even finish on large, flat surfaces. To create this consistent finish, the wide rotating drum and conveyor keep your material in steady contact with the abrasive. The drum is made of aluminum to prevent heat from building up and wearing down the sandpaper or burning your panels. Easy to adjust, all it takes is a turn of the dial to align the drum and conveyor. These sanders have a port to connect to a dust collector or vacuum system to keep your workspace clean and reduce clogs. Sanding sheets are sold separately.
These sanders are open on one end to make room for your workpiece to hang out when you’re sanding a piece that’s wider than the drum length. Maximum workpiece width assumes you’ll flip your workpiece around to take two passes through these sanders.
Sanders with a 10" drum are sized to fit comfortably on your workbench.
Sanders with a 19" drum come with a stand. They automatically adjust the conveyor speed based on the weight of your workpiece to prevent burning or gouging the surface. This also helps you create a consistent finish if your workpiece has varying densities. They automatically tension the sanding sheet as you wrap it around the drum and help you make sure the sheet overlaps correctly. A lock holds the drum at the height you’ve set.
For Max. Workpiece | Drum | Table | No-Load Speed | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Lg. | Dia. | Material | Wd. | Lg. | Min. | Max. | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | hp | Phase | Includes | Features | Each | |
| 20" | 3" | 10" | 5" | Aluminum | 10" | 15" | 0 fpm | 10 fpm | Variable | 120V AC | 8 | 1,720 | 1 | Single | __ | Dust Extraction Port | 00000000 | 000000000 |
| 38" | 4" | 19" | 5" | Aluminum | 22 1/2" | 22 1/2" | 0 fpm | 10 fpm | Variable | 120V AC | 15 | 1,740 | 1 3/4 | Single | Steel Stand | Dust Extraction Port | 00000000 | 00000000 |
Also known as abrasive wraps, these sheets are cut to fit around the drum of a drum sander. They’re coated with aluminum oxide, the most common abrasive for general use. Tough and fracture resistant, it’s often used to smooth wood and metal.
For 10" Drum Lg. | For 19" Drum Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grit | For Use On | Abrasive Material | Abrasive Backing Material | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
For Rough Finish | |||||||||
| 36 | Steel, Wood | Aluminum Oxide | Paper | __ | 000000 | 00 | 3 | 00000000 | 000000 |
| 60 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 000000 | 3 | 00000000 | 00000 |
| 80 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
For Smooth Finish | |||||||||
| 100 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 120 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 150 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 180 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
| 220 | Steel, Wood | Aluminum Oxide | Paper | 6 | 00000000 | 00000 | 3 | 00000000 | 00000 |
Spindle Sanders
Sand curved, contoured, and complex surfaces, such as table legs or inside holes. The spindle on these sanders oscillates while it rotates so you can use the full abrasive surface of the sanding sleeve. This motion reduces the risk of burning your workpiece and helps the sleeve last longer. The table tilts down 45° to create beveled edges. Connect these sanders to a dust collector or vacuum system to clear away debris from your workspace and prevent your sander from clogging. These sanders are small enough to fit on your workbench.
They include different sizes of spindles and table inserts for a variety of jobs. The spindles are threaded on one end, so they're easy to change out. The table inserts install around the spindle to prevent dust and debris from falling into the motor. A built-in storage rack keeps the spindles and table inserts handy.
For Sleeve | Table | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Lg. | Wd. | Lg. | Max. No-Load Speed, rpm | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | hp | Phase | Includes | Features | Each | |
| 1/4", 1/2", 5/8", 1 1/2", 2" | 5 1/2", 6" | 14 1/2" | 14 1/2" | 1,725 | One | 120V AC | 7.5 | 1,720 | 1/2 | Single | One each Spindles for 1/4", 1/2", 5/8", 1 1/2", and 2" ID Sleeves One each 1/4" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 1/2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 5/8" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 1 1/2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 3/4" and 2" Oblong Table Inserts One each 3/4" and 2" Round Table Inserts | Dust Extraction Port, Built-In Storage Racks | 0000000 | 0000000 |