Because these trucks tilt and roll like a hand truck they are easier to move than mobile drum dispensing stands. They are suited for long distance moves. Tilt them flat to dispense. Handle grips make the handles more comfortable.

Style A have a hook-style grabber that attaches to the rim of the drum for a secure hold and wedges that slide under the drum for easy loading. When in the dispensing position, rollers on the frame allow you to rotate the drum for mixing. For use with steel drums.

Style B has a polyester strap with spring-loaded cinching buckle to secure the drum, extra-wide load wedges for easy loading, and a kickstand to keep the truck standing. They can be used with fiber, plastic, and steel drums.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll over smooth or rough surfaces. Trucks with steel wheels are rugged, but noisy and can damage floors. They work best on smooth surfaces.

Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.

These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns. Load wedges slide under the drum for easy loading and unloading, and a spring-loaded kickstand keeps the truck standing and adds stability during dispensing. The four polypropylene wheels are suitable for long distance moves on smooth surfaces.

Move a drum where you need it, then dispense. Also known as drum cradles, these stands are an economical way to store, mix, and drain drums. Drum rim catches secure drums and prevent them from slipping out.

Style F has load wedges that slide under the drum for easy loading and cross braces with rollers that let you rotate the drum for draining and mixing in the horizontal position.

Telescoping handles provide leverage and control when tipping a drum to empty.

Skid-resistant surfaces prevent sliding when loading.

Polypropylene and polyethylene wheels are lightweight and roll best on smooth surfaces. Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Steel and aluminum wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

Note: Length for stands with telescoping handles is with handles in the retracted position.

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs. A U-shaped platform with a recessed step and molded handles makes loading, unloading, and tipping to dispense easy. A strap secures the drum. In the dispensing position, the drum is held at a slight downward angle for better flow. The sump has two openings with garden hose threads for drainage.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll on smooth and rough surfaces. Meets EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Lift, transport, and place drums without a forklift. Roll these trucks right to the edge of your pallet or platform to load and unload drums. Rear swivel casters make them simple to steer.

Trucks with a gas-spring pump handle raise your drum as you pump down the handle. The leverage of the handle and the power of the gas spring alleviate the weight of the load. Built to prevent tipping, a ratchet mechanism keeps your movements controlled. Three hooks securely hold the drum below the rim.

Trucks with a hydraulic pump require less manual effort to lift and position heavy drums than lift trucks with a gas-spring pump handle. Control up and down movement by activating either a hand or foot lever. A claw-style gripper attaches at one point on the rim of your drum—similar to an electric can opener latching onto a can.

Trucks with retractable legs collapse into a smaller footprint for transportation across tight facilities. Extend the legs before lifting.

Trucks with a counterbalanced base have no front legs, so you can roll them right next to tight cabinets or shelving structures to load or unload your drum.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces. Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbent.

Lift heavy drums in seconds—without ever touching them. Powered by a battery-operated hydraulic pump, these trucks grip, lift, lower, and release drums with the push of a button. No manual pumping required. The claw-style grabber won’t release the drum until it’s fully set down. With a lift height over 3 ft., these trucks can stack two drums or load them into most pickup trucks. A V-style base makes it easy to load and unload drums from pallets and platforms. Plug these trucks into any standard wall outlet to charge the battery.

Retractable legs let you maneuver in tight spaces, and two swivel casters at the rear of the truck make steering and pivoting easy. Once the truck is in place, engage the floor lock to keep it stable while you lift and lower loads. The wheels are phenolic, so they’re nonmarking and roll best on smooth surfaces.

Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping. A T-handle pivots out for pulling, locks upright for pushing, and folds in for storage. One swivel caster and two axle mounted wheels make these dollies easy to steer. Casters are welded to the frame for strength.

Polypropylene wheels are lightweight and work on smooth surfaces. Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces. Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

A removable handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles. They can be used with round drums as well as square cartons and crates.

Solid platforms provide good overall support and have a drain plug for spills and leaks.

Permanent casters are more durable than removable casters.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces.

The platform on this dolly is open in front to make loading and unloading easier while a lip on the other three sides keeps the load from sliding off. A removable handle and a square deck, along with two swivel and two rigid casters make it easy to push, pull, and steer along walls and aisles. The dolly can be used with round drums as well as square cartons and crates. Their phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy.

A ring around the outside of these dollies supports loads and prevents them from slipping off.

Style A include a removable T-handle for pulling.

Dollies with rubber wheels absorb shock to roll over smooth or rough surfaces.

Contain spills when moving and storing drums. Dollies have plastic wheels for use on smooth surfaces.

Dollies with perforated platforms have removable top grating deck for easy cleaning and a drain plug in the base. Wheel brakes prevent dollies from rolling. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with two swivel casters and two axle mounted wheels have better steering control.

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with a chain and ratchet-style tightener secures the drum, and a floor lock keeps these handlers stationary.

Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.

Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height.

Handlers with a crank handle are best for dispensing at lower heights. Handles with a chain hand wheel are easier to use at higher dispensing heights.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom. They give the handler enough stability to be used with rimless plastic and fiber drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.