Remove bulk water vapor from your compressed air line by refrigerating the air. These dryers have a timer-activated drain valve that opens automatically to discharge condensate. Install them in your air line after the compressor and separator.

Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done. They have a clear bowl so you can see inside to monitor the desiccant. When the desiccant becomes saturated, it changes color to indicate that the dryer should be changed.

Use these dryers with filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done. They have a polyurethane housing that has excellent resistance to synthetic compressor lubricants, solvents, acids, and chemicals. The bowl is clear so you can monitor the desiccant. When it becomes saturated, it changes color to indicate it should be replaced. Install in your air line just before the tool you want to protect.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line. Install after an oil filter to protect the desiccant. They have a sight glass so you can see inside the bowl to monitor contents.

Desiccants—Desiccant (sold separately) is required to remove moisture from air. To reuse saturated desiccant, heat it at its reactivation temperature until it returns to its dry color.

Remove water and compressor oil from your air line to prevent damage to air-powered tools and equipment. The dryer and filter share the same cartridge to save space and reduce downtime when changing them. Install them after separators and aftercoolers to remove the bulk of the moisture, and after a particle filter to protect the desiccant.

For an uninterrupted supply of clean, dry compressed air, these dryers have two desiccant towers. While desiccant in one tower absorbs moisture, the desiccant in the other is drying out, then they switch automatically. In addition to water, they also remove compressor oil and particles to extend their life and the components downstream from them. Install them after separators and aftercoolers, which remove the bulk of the moisture.

Replacement Filter Elements—Replacement filter elements (sold separately) help remove oil and particles and extend equipment life.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal. Because they are noncycling and run continuously, they are best for applications that need constant dry air. A float-operated drain valve opens automatically when the bowl begins to fill. After water removal, a heat exchanger raises the outlet air temperature to prevent condensation on downstream piping. The built-in display lets you monitor and adjust the dew point of the compressed air. Be sure to install in your air line after the compressor and separator.