Filter by
Anchors for Drywall
The traditional, economical choice for mounting lightweight switches, security cameras, and clocks into drywall. All of these anchors expand against your hole’s walls to reinforce your mounting hole and resist pullout.
To install, drill a hole slightly deeper than the anchor is long. Next, insert the anchor until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. Remove your component by unfastening the screw, but the anchor itself cannot be removed.
Anchors
Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.
Finned—For a secure hold, two large fins grip holes to prevent twisting better than ridges on the conical anchors. The fins also add tension before tightening the screw, so these anchors won't fall out of overhead holes.
Ultimate Strength | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Screw Size | Lg. | Drill Bit Size | Material | Pull-Out | Shear | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Conical | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 4, No. 5, No. 6, No. 7, No. 8 | 3/4" | 3/16" | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 6, No. 7, No. 8, No. 9, No. 10 | 7/8" | 3/16" | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 10, No. 12 | 1" | 1/4" | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 14, No. 16 | 1 3/8" | 5/16" | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Finned | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 8 | 1 3/8" | 1/4" | Nylon | Not Rated | Not Rated | 50 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 10, No. 12, No. 14 | 2" | 5/16" | Nylon | Not Rated | Not Rated | 50 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 14 | 2 3/8" | 3/8" | Nylon | Not Rated | Not Rated | 25 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Anchors with Screw
![]() |
Conical—Ridges on the body prevent spinning during installation, making it easy to tighten down the screw.
Screw | Ultimate Strength | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Lg. | Drill Bit Size | Fastener Head Type | Drive Style | Material | Pull-Out | Shear | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Conical | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 6 | 1" | 3/4" | 3/16" | Rounded | Phillips | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 6 | 1" | 3/4" | 3/16" | Rounded | Phillips/Slotted | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 6 | 1" | 7/8" | 3/16" | Rounded | Phillips | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 10 | 1" | 1" | 1/4" | Rounded | Phillips | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 10 | 1" | 1" | 1/4" | Rounded | Slotted | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 10 | 1" | 1" | 1/4" | Hex | Slotted | Polyethylene | Not Rated | Not Rated | 100 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No. 14 | 1.25" | 1 3/8" | 5/16" | Rounded | Phillips | Polyethylene | Not Rated | Not Rated | 50 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hammer-In Anchors for Drywall
Tap in like a nail—no need to drill a hole or clean up after installation like other anchors. These anchors have a leg that flips open to grab behind your wall like a talon, making them as strong as toggle bolt anchors. Unlike drilling and toggle bolt anchors, these leave a small slit behind for easier wall repairs.
To install, tap the anchor into your drywall until it’s flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. You can remove your component by unfastening the screw. However, removing the screw will weaken the strength. To remove the anchor, unfasten the screw to release the leg’s grip. Then, partially reinsert the screw to use it as a handle and gently wiggle the anchor out.
Anchors with Screw
![]() |
Screw | Ultimate Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Lg. | For Wall Thk. | Fastener Head Type | Drive Style | Material | Pull-Out, lbf | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | |||
No. 8 | 1 1/4" | 2" | 1/2" to 5/8" | Rounded | Phillips | Nylon | 165 | Not Rated | 1/2" Drywall | 10 | 00000000 | 00000 | ||
Drilling Anchors for Drywall
Skip having to drill a hole. These anchors save you time and effort by drilling their own holes. Their threads offer a stronger hold than
our standard plug anchors to mount light fixtures, bulletin boards, and window blinds. They’re also easier to remove but leave a large hole behind.
To install, screw the anchor into your drywall until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. You can remove your component by unfastening the screw. However, frequently removing the screw will weaken the strength. To remove the anchor, easily back it out with a screwdriver.
Anchors
![]() |
Ultimate Strength, lbf | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Screw Size | For Wall Thk. | Lg. | Material | Pull-Out | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | ||
No. 6 | 3/8" to 5/8" | 1 3/8" | Nylon | 40 | 50 | 3/8" Drywall | 100 | 0000000 | 000000 | |
No. 6, No. 7, No. 8, No. 9, No. 10 | 3/8" to 5/8" | 1 5/8" | Nylon | 50 | Not Rated | 3/8" Drywall | 50 | 00000000 | 00000 | |
No. 6, No. 7, No. 8 | 3/8" to 3/4" | 1 1/4" | Zinc | 30 | Not Rated | 3/8" Drywall | 50 | 0000000 | 0000 | |
No. 8 | 3/8" to 3/4" | 1 5/8" | Zinc | 40 | Not Rated | 3/8" Drywall | 50 | 0000000 | 00000 | |
No. 8 | 3/8" to 3/4" | 1 5/8" | Nylon | 40 | Not Rated | 3/8" Drywall | 50 | 00000000 | 0000 |
Anchors with Screw
![]() |
Screw | Ultimate Strength, lbf | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | For Wall Thk. | Lg. | Material | Pull-Out | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | ||
No. 6 | 1" | 3/8" to 5/8" | 1" | Zinc | 40 | 40 | 3/8" Drywall | 25 | 00000000 | 00000 | |
No. 6 | 1" | 3/8" to 5/8" | 1 3/8" | Nylon | 40 | 40 | 3/8" Drywall | 50 | 0000000 | 00000 | |
No. 8 | 1" | 3/8" to 1" | 1 5/16" | Zinc | 40 | 60 | 3/8" Drywall | 25 | 00000000 | 0000 | |
No. 8 | 1" | 3/8" to 1" | 1 11/16" | Nylon | 40 | 60 | 3/8" Drywall | 25 | 0000000 | 0000 | |
No. 8 | 1 1/4" | 3/8" to 3/4" | 1 5/8" | Zinc | 20 | Not Rated | 3/8" Drywall | 25 | 0000000 | 00000 | |
No. 8 | 1 1/4" | 3/8" to 3/4" | 1 5/8" | Nylon | 20 | Not Rated | 3/8" Drywall | 25 | 0000000 | 00000 | |
No. 8 | 1 1/2" | 3/8" to 5/8" | 1 3/4" | Nylon | 40 | 100 | 3/8" Drywall | 50 | 00000000 | 00000 |
Reusable Anchors for Drywall
![]() |
![]() | ![]() |
Installation Tools |
Good for installing signs and other objects you’d like to swap out, these anchors have a bolt that you can repeatedly remove without
affecting the anchor. The sleeve expands behind the wall, creating a mushroom-shape grip for a secure hold. Teeth on the flange bite the drywall surface, so the anchor won’t twist when you remove and reinstall the screw. While the bolt can be removed, the anchor itself cannot.
To install, tap the anchor into a drilled hole until it's flush with your drywall. Then, thread a machine screw through your object and tighten to expand the anchor. For repetitive installations, use the optional installation tool. It inserts the screw and expands the anchor with a single squeeze of the handle, speeding up the setup time.
Ultimate Strength, lbf | Installation Tools | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Usable Lg. | Drill Bit Size | Material | Pull-Out | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | Each | |||
6-32 | 1 1/2" | 3/8" to 1/2" | 5/16" | Zinc-Plated Steel | 80 | 120 | 3/8" Drywall | 25 | 000000000 | 000000 | 000000000 | 000000 | |
10-24 | 1 3/4" | 1/2" to 5/8" | 3/8" | Zinc-Plated Steel | 100 | 140 | 3/8" Drywall | 10 | 000000000 | 00000 | 000000000 | 00000 | |
10-24 | 2 1/4" | 3/4" to 1 1/8" | 3/8" | Zinc-Plated Steel | 100 | 140 | 3/8" Drywall | 10 | 000000000 | 0000 | 000000000 | 00000 | |
1/4"-20 | 2 1/8" | 1/2" to 5/8" | 7/16" | Zinc-Plated Steel | 100 | 160 | 3/8" Drywall | 10 | 000000000 | 00000 | 000000000 | 00000 | |
1/4"-20 | 2 5/8" | 3/4" to 1 1/8" | 7/16" | Zinc-Plated Steel | 100 | 160 | 3/8" Drywall | 10 | 000000000 | 0000 | 000000000 | 00000 |
Toggle Anchors for Drywall
![]() |
The toggle locks in place behind your wall to prevent pullout, while fins stop twisting during installation. Unlike traditional toggle bolt anchors, these require a smaller hole and have a flange that covers the hole once installed. Since the gripping force is spread over the length of the toggle, these anchors create a stronger hold than our plug anchors.
To install, fold the anchor in the middle so the toggle wings touch each other. Insert the anchor into a drilled hole and tap it until it's flush with your drywall. Then, use the included tool to pop the anchor open. Next, thread a tapping screw through your component and tighten for a secure hold. You can repeatedly remove your screw without losing strength or the toggle behind the wall. However, the anchor itself cannot be removed.
Ultimate Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Screw Size | For Wall Thk. | Extended Lg. | Drill Bit Size | Material | Pull-Out, lbf | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | ||
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 3/8" to 1/2" | 1 1/4" | 5/16" | Polypropylene | 140 | Not Rated | 1/2" Drywall | 20 | 000000000 | 00000 | |
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 5/8" to 3/4" | 1 3/8" | 5/16" | Polypropylene | 150 | Not Rated | 3/4" Drywall | 20 | 000000000 | 0000 | |
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14 | 1" | 1 3/4" | 5/16" | Polypropylene | 170 | Not Rated | 1" Drywall | 25 | 000000000 | 00000 | |
No. 8, No. 9, No. 10, No. 12 | 1/8" to 1/4" | 3/4" | 5/16" | Polypropylene | 120 | Not Rated | 1/4" Drywall | 20 | 000000000 | 0000 |
Reusable Anchor Assortments for Drywall
![]() | ![]() |
Installation Tools |
Keep a variety of reusable anchor sizes and lengths on hand for installing signs and other objects you’d like to swap out. All of these anchors have a bolt that you can repeatedly remove without affecting the anchor. The sleeve expands behind the wall, creating a mushroom-shape grip for a secure hold. Teeth on the flange bite the drywall surface, so the anchor won’t twist when you remove and reinstall the screw. While the bolt can be removed, the anchor itself cannot.
To install, tap or drill the anchor into a drilled hole so it's flush with your drywall. Then, thread a machine screw through your object and tighten to expand the anchor. For repetitive installations, use the optional installation tool. It inserts the screw and expands the anchor with a single squeeze of the handle, speeding up the setup time.
Drywall Anchors Included | Installation Tools | ||||||||
---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Hammer In | Drill In | Material | Container Type | Each | Each | |||
230 | 6-32 × 1 5/16" (50 Pieces) 6-32 × 1 11/16" (25 Pieces) 6-32 × 2 1/4" (25 Pieces) | 6-32 × 1" (25 Pieces) 6-32 × 1 1/2" (25 Pieces) 6-32 × 2" (25 Pieces) 6-32 × 2 1/2" (20 Pieces) 10-24 × 2 1/4" (10 Pieces) 10-24 × 2 3/4" (10 Pieces) 1/4"-20 × 2 1/4" (10 Pieces) 1/4"-20 × 2 3/4" (5 Pieces) | Steel | Plastic Box | 000000000 | 0000000 | 000000000 | 000000 |