How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Copper-Nickel Butt-Weld Pipe Fittings
Fittings weld flush against pipe, creating a strong connection that permits maximum flow. Fittings are also known as Pressure Class 200 fittings. They are copper-nickel, which has excellent resistance to stress cracking and better corrosion resistance than most stainless steel alloys. They are often used in highly-corrosive environments, such as salt water applications.

- For Use With: Air, Natural Gas, Oil, Water, Salt Water
- Pressure Class: 200
- Military Specifications Met: NAVSEA 810-1385880
- Pipe: Use Class 200 copper-nickel

- For Use With: Air, Natural Gas, Oil, Water, Salt Water
- Pressure Class: 200
- Military Specifications Met: NAVSEA 810-1385880
- Pipe: Use Class 200 copper-nickel

- For Use With: Air, Natural Gas, Oil, Water, Salt Water
- Pressure Class: 200
- Military Specifications Met: NAVSEA 810-1385880
- Pipe: Use Class 200 copper-nickel
Copper-Nickel Threaded Pipe Fittings
Made of copper-nickel, these fittings have excellent resistance to stress cracking and have better corrosion resistance than most stainless steel alloys. They are often used in highly-corrosive environments, such as salt water applications.

- For Use With: Air, Natural Gas, Oil, Water, Steam, Salt Water
- Specifications Met: ASME B16.3
- Pipe Nipples and Pipe: Use Schedule 40 copper-nickel
Low-Pressure Clamp-On Connectors for Drain, Waste, and Vent
To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

- For Use With: Air, Water
- Temperature Range: -40° to 120° F
- Specifications Met: ASTM D5926
- For Pipe Material: Cast Iron, Steel, Copper, Lead, PVC Plastic, CPVC Plastic, Polyethylene Plastic
For Pipe OD | For Pipe Size | Max. Pressure | Material | Clamp Material | Flexibility | Each | |
Pipe End × Pipe End | |||||||
---|---|---|---|---|---|---|---|
1 7/8" | 1 1/2 | 4 psi @ 72° F | PVC Plastic | 300 Series Stainless Steel | Flexible | 0000000 | 000000 |
2 3/8" | 2 | 4 psi @ 72° F | PVC Plastic | 300 Series Stainless Steel | Flexible | 0000000 | 00000 |
3 1/2" | 3 | 4 psi @ 72° F | PVC Plastic | 300 Series Stainless Steel | Flexible | 0000000 | 00000 |
4 1/2" | 4 | 4 psi @ 72° F | PVC Plastic | 300 Series Stainless Steel | Flexible | 0000000 | 00000 |
Heat Pipe Benders

Create smooth, accurate bends in round heat pipe for routing heat away from sensitive electronic components and toward a heat sink. These specially designed tools allow a smooth bending motion to reduce marks on your pipe, which ordinary pliers can often leave behind. All have graduation markings to prevent over bending, which can reduce the ability of your heat pipe to transfer heat. Every 45° bend in a heat pipe will reduce the cooling capacity of the heat pipe by about 2.5%. Place these tools on benches, vises, and workstations without scratching them—all have rubber mounting feet.
Plate | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Pipe OD, mm | Bend Radius, mm | Maximum Bending Angle | Angle Increments | Material | Overall Length | Length | Width | Mounting Location | Each | |
For Copper Pipe | ||||||||||
4 | 12 | 170° | 15°, 30°, 45°, 60°, 75°, 90°, 105°, 120°, 135°, 150° | Aluminum | 7 3/4" | 4 3/8" | 5 3/4" | Benchtop | 0000000 | 0000000 |
6 | 18 | 170° | 15°, 30°, 45°, 60°, 75°, 90°, 105°, 120°, 135°, 150° | Aluminum | 8 1/2" | 4 1/2" | 6 1/4" | Benchtop | 0000000 | 000000 |
8 | 24 | 170° | 15°, 30°, 45°, 60°, 75°, 90°, 105°, 120°, 135°, 150° | Aluminum | 9 1/8" | 4 1/2" | 6 1/4" | Benchtop | 0000000 | 000000 |