McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    66 Products

    Battery-Powered Pistol-Grip Grease Guns

    Image of Product. Front orientation. Grease Guns. Battery-Powered Pistol-Grip Grease Guns.
    Image of Specification. Front orientation. Contains Annotated. For Standard Grease Fittings. Battery-Powered Pistol-Grip Grease Guns.
    More portable than air-powered options, these guns operate on a rechargeable battery. They have a pistol grip that allows for one-hand operation, so they're better for lubricating hard-to-reach spots than lever-grip guns. To illuminate your lubrication point, they have a built-in light. Pull the trigger using small strokes to deliver small amounts of grease; hold the trigger for a continuous flow. All guns have a spring guard on the nozzle to prevent kinking.
    12V DC Battery—12V DC guns require a filler nipple (sold separately) to load grease using a bulk filler pump.
    20V DC Battery—20V DC guns have a grease meter that measures the amount of grease dispensed. They also have a level indicator that measures the amount of grease left in the gun.
    Grease Guns
    Replacement
    Batteries
    Replacement
    Chargers
    Flow Rate,
    fl oz/min
    Nozzle Connection
    Cap., fl.
    oz.
    High
    Pressure
    Low
    Pressure
    For NLGI Consistency
    Grade
    Max. Grease Outlet
    Pressure, psi
    Nozzle
    Lg.
    Thread
    Type
    Pipe/Thread
    Size
    Gender
    Batteries
    Included
    Loading Method
    Each
    Each
    Each
    For Standard Grease Fittings
     
    12V DC Battery
    14 1/22.6—00, 0, 1, 2
    		8,00030"NPTF
    UNEF    		1/8
    7/16"-28    		Male
    Male    		YesBulk Filler Pump, Cartridge00000000000000000000000000000000000000000
     
    20V DC Battery
    16641, 2
    		6,00036"NPTF
    UNF    		1/8
    7/16"-20    		Male
    Male    		YesCartridge00000000000000000000000000000000000000
     
    Accessories and Replacements for Grease Guns
    Each
    Carrying Strap0000000000000
    Replacement Grease Tube Assembly for 12V DC Gun000000000000
    Lincoln Filler Nipple000000000000
    Replacement Nozzle for 12V DC Gun000000000000

    Adjustable-Interval Electric Oil-Dispensing Pumps

    Image of Product. Front orientation. Oil-Dispensing Pumps. Adjustable-Interval Electric Oil-Dispensing Pumps.
    Set the cycle interval as well as the dispensing duration. This pump has a maximum flow of 0.1 oz. per second. It has a low-level switch that triggers an audible alarm and can be wired to additional, external alarms.
    Use metering valves (sold separately) to adjust the flow of oil to multiple lubrication points.
    Overall
    Mounting
    For Max. Viscosity
    No. of
    Pumps
    Cap.,
    qt.
    Flow Duration,
    sec.
    Flow Rate,
    fl oz/sec
    Dispensing
    Interval, min.
    Max. Oil Outlet
    Pressure, psi
    Reservoir
    Material
    Ht.
    Wd.
    Dp.
    Voltage,
    V AC
    Current,
    amp
    Temp. Range,
    ° F
    Hole
    Dia.
    Fasteners
    Included
    ISO
    Grade
    SAE
    Grade
    SSU Grade,
    SSU
    AGMA
    Grade
    Each
     
    5/16"-24 UNF Female Oil Outlet
    13 1/81 to 1800.13 to 999100Plastic10 1/16"8 7/8"6 11/16"1200.0332 to 1201/4"No150407004000000000000000
     
    Replacement Reservoirs
    Overall
    Ht.
    Wd.
    Dp.
    Reservoir
    Material
    Temp. Range,
    ° F
    Each
    6 7/16"7 7/8"5 1/8"Plastic32 to 12000000000000000

    Precision Adjustable-Interval Electric Oil-Dispensing Pumps

    Image of Product. 2 Pumps. Front orientation. Oil-Dispensing Pumps. Precision Adjustable-Interval Electric Oil-Dispensing Pumps, 2 Pumps.
    Image of Product. 4 Pumps. Front orientation. Oil-Dispensing Pumps. Precision Adjustable-Interval Electric Oil-Dispensing Pumps, 4 Pumps.

    2 Pumps

    4 Pumps

    With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use retaining ring pliers to turn the flow-adjustment nut. Pumps and their components come mounted on a panel.
    Panel
    For Max. Viscosity
    No. of
    Pumps
    Cap.
    oz. per Cycle,
    fl. oz.
    Dispensing
    Interval
    Max. Oil Outlet
    Pressure, psi
    Ht.
    Wd.
    Reservoir
    Material
    Pump
    Material
    Voltage,
    V AC
    Current,
    amp
    Temp. Range,
    ° F
    Mounting Fasteners
    Included
    ISO
    Grade
    SAE
    Grade
    SSU Grade,
    SSU
    AGMA
    Grade
    Each
     
    1/8 NPT Female Oil Outlets
    216 fl. oz.0 to 0.0051 min. to 24 hr.25010 3/4"10 7/8"PlasticAluminum
    		1200.06-15 to 120No220901,00050000000000000
    41 qt.0 to 0.0051 min. to 24 hr.10010 3/4"10 7/8"PlasticAluminum
    		1200.06-15 to 120No220901,0005000000000000
     
    Replacement Reservoirs
    Oil Outlets
    Overall
    Mounting
    Cap.
    No.
    of
    Thread
    Type
    Pipe
    Size
    Gender
    Ht.
    Wd.
    Dp.
    Reservoir
    Material
    Temp. Range,
    ° F
    Thread
    Size
    Hole
    Dia.
    Fasteners
    Included
    Each
    16 fl. oz.1NPT
    		1/8
    		Female5 9/16"3 1/4"3 1/4"Plastic0 to 2255/8"-18
    		——0000000000000
    1 qt.1NPT
    		1/8
    		Female6 13/16"4 3/8"4 3/8"Plastic0 to 2255/8"-18
    		13/64"No000000000000

    Flood Coolant Dispensers

    Image of Product. Front orientation. Coolant Dispensers. Flood Coolant Dispensers.
    Draw coolant from your existing tank. Providing a constant flow of coolant, this flood dispenser dissipates heat more efficiently than mist and droplet dispensers, making it suitable for cooling long machine cycles. It has an any-which-way nozzle that stays in place once positioned. The mounting base is magnetic.
    Nozzle
    Dispensing Tip
    Flow Rate @
    30 psi, gpm
    Flow On/Off
    Mechanism
    Max. Pressure,
    psi
    No. of Coolant
    Outlets
    Lg.
    Type
    Material
    Mount
    Method
    Bend
    Radius
    No.
    of
    Orifice Dia.
    Material
    Each
    For Use With Air, Coolant, Cutting Oil, and Water
    90Handle5018"FlexibleAcetal
    		Magnetic2"31/16", 1/8", 1/4"Acetal
    		0000000000000
     

    Droplet Coolant Dispensers

    Image of Product. Front orientation. Coolant Dispensers. Droplet Coolant Dispensers .
    Deliver a small, controlled amount of coolant to a workpiece. Turn the knobs to set the air flow and the number of droplets per minute for each coolant stream. Dispenser has two any-which-way nozzles that stay in place once positioned. Each nozzle has a magnetic base.
    Note: Dispenser is only for use with synthetic- and vegetable-based coolants (sold separately).
    Coolant Outlet
    Nozzle
    Overall
    Dispensing
    Tip
    Cap., fl.
    oz.
    Droplets
    per min.
    Max. Pressure,
    psi
    No.
    of
    Hose Lg.,
    ft.
    Hose Material
    Lg.
    Type
    Material
    Mount
    Method
    Bend
    Radius
    Ht.
    Wd.
    Dp.
    Reservoir
    Dia.
    Reservoir
    Material
    Lg.
    Material
    Air Inlet
    Pressure, psi
    For Max. SSU Viscosity
    Grade, SSU
    Voltage,
    V AC
    Features
    Each
    For Use With Coolant
    162 to 1612526Polyurethane Plastic18"FlexibleAcetal
    		Magnetic1 3/4"7 1/16"10 1/16"7 1/16"3 1/2"Polyethylene1 1/2"Brass60 to 125200120Adjustable Flow00000000000000000
     
    Accessories and Replacements for Coolant Dispensers
    Mounting kit is magnetic, so it’s easy to move the system from one machine to another.
    Each
    Mounting Kit00000000000000
    Replacement Nozzle00000000000000
    Replacement Reservoir0000000000000
    Synthetic Coolant, 1-gal. Containers00000000000000
    Vegetable Coolant, 1-gal. Containers00000000000000

    Fixed-Interval Electric Oil-Dispensing Pumps

    Image of Product. Front orientation. Oil-Dispensing Pumps. Fixed-Interval Electric Oil-Dispensing Pumps.
    Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle. Pumps have a low-level switch that triggers an audible alarm and can be wired to additional, external alarms.
    Use metering valves (sold separately) to adjust the flow of oil to multiple lubrication points.
    Overall
    Mounting
    For Max. Viscosity
    No. of
    Pumps
    Cap.,
    qt.
    oz. per Cycle,
    fl. oz.
    Max. Oil Outlet
    Pressure, psi
    Reservoir
    Material
    Ht.
    Wd.
    Dp.
    Voltage,
    V AC
    Current,
    amp
    Temp. Range,
    ° F
    Hole
    Dia.
    Fasteners
    Included
    ISO
    Grade
    SAE
    Grade
    SSU Grade,
    SSU
    AGMA
    Grade
    Choose a Dispensing Interval, min.
    Each
     
    5/16"-24 UNF Female Oil Outlet
    12 1/80.1 to 0.240Plastic8 7/8"7 7/8"5 1/8"1200.0332 to 1201/4"No150407004
    3
    ,
    5
    ,
    10
    ,
    15
    ,
    30
    ,
    60
    		0000000000000
     
    Replacement Reservoirs
    Overall
    Ht.
    Wd.
    Dp.
    Reservoir
    Material
    Temp. Range,
    ° F
    Each
    6"6 1/2"4 1/2"Plastic32 to 12000000000000000

    Electrically Operated Flow-Adjustment Valves

    Image of Product. Front orientation. Contains Annotated. Flow-Adjustment Valves. Electrically Operated Flow-Adjustment Valves, Top Inlet.
    Image of Product. Front orientation. Contains Annotated. Flow-Adjustment Valves. Electrically Operated Flow-Adjustment Valves, Side Inlet.

    Top Inlet

    Side Inlet

    A solenoid automatically starts and stops flow to a single lubrication point to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Valves can be used with any oil grade. Flow rate depends on temperature. They have PTF and NPTF (Dryseal) threads, which are compatible with NPT threads.
    Oil Inlet
    Oil Outlet
    Overall
    Pipe
    Size
    Thread
    Type
    Gender
    Pipe
    Size
    Thread
    Type
    Gender
    Ht.
    Wd.
    Material
    Voltage,
    V AC
    Current,
    amp
    Temp. Range,
    ° F
    For Use
    With
    Features
    Each
    Top Inlet
    1/8
    		PTF-SAE
    		Female1/8
    		NPTF
    		Male3 9/32"4 1/4"Brass1200.1-30 to 250OilGlass Flow Sight00000000000000
     
    Side Inlet
    1/4
    		PTF-SAE
    		Female1/4
    		NPTF
    		Male5 15/16"2 13/16"Brass1200.1-30 to 250OilGlass Flow Sight0000000000000
     

    Flood Coolant Dispensers with Reservoir

    Image of Product. Front orientation. Coolant Dispensers. Flood Coolant Dispensers with Reservoir , Style A.
    Image of Product. Front orientation. Coolant Dispensers. Flood Coolant Dispensers with Reservoir , Style B.

    Style A

    Style B

    Image of Product. Front orientation. Coolant Dispensers. Flood Coolant Dispensers with Reservoir , Style C.
    Image of Product. Front orientation. Coolant Dispensers. Flood Coolant Dispensers with Reservoir , Style D.

    Style C

    Style D

    These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.
    Maximum flow rate and shut-off height are for water-soluble oil.
    Shut-Off Height—Shut-off height is the maximum height to which the water-soluble oil can be pumped.
    Coolant Outlet
    Nozzle
    Reservoir
    Dispensing
    Tip
    Style
    Cap.,
    gal.
    Max. Flow Rate @
    ft. of Head
    Max. Pressure,
    psi
    No.
    of
    Hose Lg.,
    ft.
    Hose
    Material
    Lg.
    Type
    Material
    Bend
    Radius
    Overall
    Ht.
    Wd.
    Dp.
    Reservoir
    Material
    Shut-Off
    Ht., ft.
    Lg.
    Material
    For Max. SSU Viscosity
    Grade, SSU
    Voltage,
    V AC
    Features
    Each
    For Use With Coolant and Water
    A1108 gph @ 1 ft.516Vinyl Plastic6"RigidPolyethylene—9 3/8"12"6"Polypropylene
    		11.5——100120Adjustable Flow, Coolant Strainer000000000000000
    B5210 gph @ 1 ft.4.316Vinyl Plastic12"FlexibleAcetal
    		1 1/2"8 1/2"16 7/8"11 1/4"Polyethylene10.2——300120Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve00000000000000
    B5325 gph @ 1 ft.5.216Vinyl Plastic12"FlexibleAcetal
    		1 1/2"8 1/2"16 7/8"11 1/4"Polyethylene12.3——300120Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve00000000000000
    B5500 gph @ 1 ft.7.516Vinyl Plastic12"FlexibleAcetal
    		1 1/2"8 1/2"16 7/8"11 1/4"Polyethylene17.3——300120Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve00000000000000
    C6600 gph @ 1 ft.5.614Neoprene
    		15"FlexibleSteel3"15"18"9 1/2"Steel141"Brass500120Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve0000000000000
    C10600 gph @ 1 ft.5.614Neoprene
    		15"FlexibleSteel3"16 1/2"24"9 3/4"Steel141"Brass500120Adjustable Flow, Coolant Strainer, On/Off Valve0000000000000
    D10500 gph @ 1 ft.7.514Buna-N
    		12"FlexibleAcetal
    		2 1/4"12"25"10"Steel17.3——300120Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve0000000000000000
     

    Electrically Operated Oil Dispensers with Flow-Adjustment Valve and Brush

    Image of Product. Front orientation. Oil Dispensers. Electrically Operated Oil Dispensers with Flow-Adjustment Valve and Brush.
    A solenoid automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust the flow of oil through the brush. Dispensers can be used with any oil grade. Flow rate depends on temperature.
    Overall
    Bristle
    120V AC 0.1 amp
    24V DC 0.4 amp
    Cap.
    Bowl
    Dia.
    Brush
    Wd.
    Ht.
    Wd.
    Ht.
    Material
    Housing
    Material
    Bowl
    Material
    Pressure Regulation
    Method
    Max. Temp.,
    ° F
    Mounting
    Thread Size
    Each
    Each
    2 1/2 fl. oz.2"1 1/2"8"4 7/16"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		0000000000000000000000000000
    5 fl. oz.2 1/2"1 1/2"8 1/2"4 11/16"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		00000000000000000000000000
    9 fl. oz.3"1 1/2"9 5/16"5 3/8"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		00000000000000000000000000
    12 fl. oz.3"1 1/2"10 5/16"5 3/8"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		00000000000000000000000000
    16 fl. oz.3 1/2"1 1/2"10 5/16"5 15/32"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		00000000000000000000000000
    1 qt.4 1/4"1 1/2"11 3/4"5 13/16"1 5/32"Nylon
    		Aluminum
    		PlasticVented1405/8"-18
    		00000000000000000000000000
    Replacements for Oil Dispensers
    Each
    Replacement Bristle Inserts0000000000000
    Replacement Brushes000000000000

    Electrically Operated Oil Dispensers with Flow-Adjustment Valve

    Image of Product. Front orientation. Oil Dispensers. Electrically Operated Oil Dispensers with Flow-Adjustment Valve.
    A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.
    Overall
    120V AC 0.1 amp
    24V DC 0.4 amp
    Cap.
    Bowl
    Dia.
    Ht.
    Wd.
    Housing
    Material
    Bowl
    Material
    Pressure Regulation
    Method
    Max. Temp.,
    ° F
    Mounting
    Thread Size
    Each
    Each
    For 1/4" OD Oil Outlet Tubes
    2.5 fl. oz.2"5 9/16"4 1/2"Aluminum
    		PlasticVented1605/8"-18
    		0000000000000000000000000000
    5 fl. oz.2 1/2"6 1/16"5"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    9 fl. oz.3"6 7/8"5 5/16"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    12 fl. oz.3"7 7/8"5 5/16"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    16 fl. oz.3 1/2"7 7/8"5 5/8"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    1 qt.4 1/4"9 5/16"5 11/16"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    2 qt.5 1/2"11 5/16"6 7/16"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
    1 gal.5 1/2"16 5/16"6 3/4"Aluminum
    		PlasticVented1605/8"-18
    		00000000000000000000000000
     
    Replacement Solenoid Coils
    Each
    24V DC Replacement Coil00000000000000
    120V AC Replacement Coil0000000000000
    back to top