Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Power multiple devices from one power source.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.

Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics.

Power devices that require less than 120 volts AC.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

Use these cords in vehicles and other agricultural and construction equipment.

Connect batteries to each other or to electrical systems.

The insulation on these cords resists water, so they can be used outdoors.

Designed for indoor applications, these cords are often used to power appliances.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

In addition to an outlet on the end, these cords have multiple inline outlets.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Give the connectors on these cords a quarter turn to lock in place.

Cover mated connectors on extension cords to prevent disconnection.

Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

Separately control each device plugged into these strips—each outlet has its own power switch.

An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

With a rubber housing, these outlet strips withstand drops and other impact.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Install these extra-long strips onto the frame of an electrical cabinet.

The shielding blocks signal interference from nearby equipment and devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).