Filter by
Tape Type
Material
Container Type
Maximum Temperature
Container Size
Performance
Begins to Harden
Dielectric Strength
Minimum Temperature
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Liquid Electrical Tape
 |  |
Applicator-Top Can |
Insulate hard-to-reach connections. Brush, dab, or spray liquid tape to create a skintight layer that covers and hardens over uneven surfaces and fills small gaps. It can also be used to seal plastic tape.
Liquid Vinyl Plastic—Great for quick insulation repairs. Thinner than liquid rubber when applied, a single coat dries in five minutes or less. Add additional coats as needed to build up insulation.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Temp. Range, ° F | Begins to Harden, min. | Reaches Full Strength, hr. | Voltage Rating, V | Specs. Met | Color | Each | |||
Liquid Vinyl Plastic | |||||||||||
| 4 | Applicator-Top Can | -50 to 275 | 5 | 24 | 700 | ASTM D149 | Clear | 76425A22 | 000000 | ||
High-Temperature Self-Fusing Silicone Electrical Tape
 |  |
Standard Profile | Tapered Profile |
Create long-lasting seals around electrical connections, even in hot, cold, or wet conditions. Made of silicone, this tape stands up to chemicals, temperature changes, and UV rays, making it a good choice for insulating wiring and components in outdoor and other harsh environments. It is self-fusing, so it sticks to itself as you layer it for a secure seal that keeps moisture out. Also known as cold-shrink tape.
Tapered Profile—Thickest in the middle and thinner at the edges. This shape ensures that when you apply partially overlapping layers, the thickness remains uniform for a smooth, even surface and consistent dielectric strength. The center guide eliminates guesswork to help you precisely align each wrap.
Wd. | Lg., ft. | Overall Thk. | Temp. Range, ° F | Voltage Rating, V | Specs. Met | Mil. Spec. | Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Standard Profile | |||||||||||
Electrical Tape | |||||||||||
| 1/4" | 36 | 0.01" | -65 to 500 | 4,000 | UL 510 | Fed. Spec. A-A-59163 Type I | Clear | 7643A61 | 000000 | ||
| 1/2" | 54 | 0.01" | -85 to 500 | 10,000 | UL 510 | Fed. Spec. A-A-59163 Type I | Clear | 7643A74 | 00000 | ||
| 1" | 10 | 0.012" | -85 to 500 | 12,000 | UL 510 | Fed. Spec. A-A-59163 Type I | Clear | 7643A57 | 0000 | ||
| 1" | 30 | 0.012" | -85 to 500 | 12,000 | UL 510 | Fed. Spec. A-A-59163 Type I | Clear | 7643A79 | 00000 | ||
| 1" | 36 | 0.02" | -85 to 500 | 15,000 | UL 510 | Fed. Spec. A-A-59163 Type I | Clear | 7643A75 | 00000 | ||
Tapered Profile | |||||||||||
Electrical Tape | |||||||||||
| 1" | 36 | 0.02" | -85 to 500 | 15,000 | UL 510 | Fed. Spec. A-A-59163 Type II | Clear | 7643A71 | 00000 | ||
| 1 1/2" | 36 | 0.03" | -85 to 500 | 20,000 | UL 510 | Fed. Spec. A-A-59163 Type II | Clear | 7643A72 | 00000 | ||
| 2" | 36 | 0.02" | -85 to 500 | 15,000 | UL 510 | Fed. Spec. A-A-59163 Type II | Clear | 7643A76 | 00000 | ||
| 2" | 36 | 0.03" | -85 to 500 | 20,000 | UL 510 | Fed. Spec. A-A-59163 Type II | Clear | 7643A73 | 00000 | ||
Write-On Adhesive-Back Wire Markers with Dispenser
 |
These dispensers have a space to write information on a wire marker before using it. Write a message on these blank markers with a permanent marker, then wrap them around wire or cables. Each marker has a clear plastic flap that wraps around the message to protect it.
For Wire | Marker | Writing Area | Dispenser | Flap | Vinyl Plastic | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Qty. of Each Marker | Gauge | OD | Wd. | Lg. | Thk. | Wd. | Lg. | Wd. | Lg. | Ht. | Material | Color | Color | Material | Each | ||
| 90 | 4 to 4/0 | 0.33" to 0.7" | 3/4" | 3" | 0.004" | 3/4" | 3/4" | 1 1/8" | 4 1/4" | 2 1/4" | Plastic | White | Clear | Plastic | 8668T21 | 000000 | |
| 150 | 8 to 4 | 0.263" to 0.33" | 3/4" | 1 7/8" | 0.004" | 3/4" | 1/2" | 1 1/8" | 4 1/4" | 2 1/4" | Plastic | White | Clear | Plastic | 8668T23 | 00000 | |
| 200 | 14 to 8 | 0.053" to 0.26" | 3/4" | 1 1/4" | 0.004" | 3/4" | 3/8" | 1 1/8" | 4 1/4" | 2 1/4" | Plastic | White | Clear | Plastic | 8668T22 | 00000 | |
Chemical-Resistant Protective Film and Tape
 |
In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.
Acetal plastic tape forms stronger bonds than Surlyn plastic tape.
Low-Friction FEP Tape
 |
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Clear—Clear tape can be used to protect bar code sensors and delicate printed surfaces.
15 ft. Long | 54 ft. Long | 108 ft. Long | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Overall Thk. | Material | Adhesive Material | Temp. Range, ° F | Each | Each | Each | |||||
Clear | ||||||||||||
| 1/4" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A411 | 000000 | ——— | 0 | ——— | 0 | ||
| 1/2" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A31 | 00000 | 7562A412 | 000000 | 7562A11 | 000000 | ||
| 3/4" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A32 | 00000 | 7562A413 | 00000 | 7562A12 | 00000 | ||
| 1" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A17 | 00000 | 7562A414 | 00000 | 7562A13 | 000000 | ||
| 1 1/2" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A34 | 00000 | 7562A415 | 000000 | 7562A14 | 000000 | ||
| 2" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A21 | 00000 | 7562A416 | 000000 | 7562A15 | 000000 | ||
| 3" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A417 | 00000 | ——— | 0 | ——— | 0 | ||
| 8" | 0.0035" | Teflon® FEP | Silicone | -100 to 400 | 7562A18 | 000000 | ——— | 0 | 7562A19 | 000000 | ||
Write-On Adhesive-Back Wire Marker Books
 |
Write a message on these blank markers with a permanent marker, then wrap them around wire or cables. Each marker has a clear plastic flap that wraps around the message to protect it.
