We will reply to your message within an hour.
Place these scales on your bench top and view weights on an easy-to-read digital screen.
These scales are 10 times more accurate than our other bench-top scales.
Weigh loads without obstructing the display. Mount the display up to 9 feet from the platform.
A stack light and audible alarm alert you when packages, products, and parts are too heavy or too light. Also known as check weighers, these scales verify quality and consistency in packing, parts machining, and other activities.
The attached cover protects the scale while you carry it.
Small enough to carry with you for measurements on the go.
Safely weigh material in hazardous environments—these scales operate with low voltages so they won’t create sparks.
Position the display up to 6 feet from the platform for an unobstructed view when weighing large loads.
IP rated for washdowns and use in dusty and wet environments, these scales are NTEP approved to weigh materials that are sold by weight.
Count parts in addition to weighing material.
Count parts and weigh materials sold by weight.
Roll this scale wherever you need to weigh.
IP69K and NTEP approved as legal for trade, use these scales in washdown environments for material that may be sold by weight.
Keep a safe distance when weighing large loads—these scales have a remote display that can be mounted up to 20 feet from the platform.
Count and weigh loads that are difficult to lift.
Measure a person’s weight, height, and BMI (body mass index).
Similar in style to a hand truck, this scale tilts back on two rubber wheels to move.
Position the display up to 14 feet from the platform for reading at a safe distance.
To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum.
NTEP-approved, these hanging scales are for use with materials sold by weight.
Attach the bar handle to these scales for weighing by hand.
A sealed aluminum housing protects from corrosion in wet environments.
Often used to weigh materials sold by weight in harsh conditions, these NTEP-approved scales have an aluminum enclosure that meets IP65 and NEMA 4 for protection from dirt and washdowns.
Weigh boxes as they flow through your conveyor line to reduce bending and lifting.
Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.
Weigh liquids, powders, or crystals as you transfer them from one container to another with these spoons.
Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.
A chuck-style grip with a round opening gets a secure hold on pins.
Measure tension force as well as weight. Also known as dynamometers.
Good for gripping most shapes and materials.
Grip paper, film, and thin plastic.
Hold fine wire and filament.
Use the included Windows-compatible software to upload measurement data.
Increase the accuracy of your manual machine when you fit it with a linear scale.
Retrofit your manual milling machine with a digital readout system. It measures and displays precise tool and workpiece positioning on two axes.
Install a digital readout stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.
Mount a digital readout system onto your manual lathe. It measures and displays precise tool and workpiece positioning on two axes.
Slide this ruler across the surface of plans, maps, and blueprints and read the measurement on the digital display in one of 111 different scales including inches, feet, yards, miles, centimeters, meters, kilometers, or a scale you define.
Accurately cut 2×4s, boards, and other materials without the hassle of a tape measure or creating jigs as a stop.
Weigh and transport pallets with one machine.