McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    187 Products

    Low-Strength SAE Grade 2 Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Square Neck.
    About half the strength of medium-strength bolts, these steel bolts are good for light duty applications. They are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. A square neck keeps these bolts from turning when tightening a nut. Zinc plating provides corrosion resistance in wet environments. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A74000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A7420000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A7440000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A7460000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A74800000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75000000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75100000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75200000
    2 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut1092670A6350000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut1092670A8360000
    4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut592670A6600000
     
    5/16"-18
    3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A7810000
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A78300000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A78500000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A78700000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A78900000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A79100000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A79200000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.22"70,000Nut2592670A79300000
    2 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut1092670A6370000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut1092670A8380000
    4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut592670A6610000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A8240000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A8260000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A82800000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A6300000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A63200000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A83400000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A84000000
    3 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut592670A66200000
    4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut592670A66300000
     
    1/2"-13
    1 1/2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A8610000
    2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A86500000
    2 1/2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A87300000
    3"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A88200000
     
    M6 × 1 mm
    20 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A11000000
    25 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A11500000
    30 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A12000000
    35 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut2593226A12500000
    40 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut2593226A13000000
     
    M8 × 1.25 mm
    20 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A23000000
    25 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A23500000
    30 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A24000000
    35 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut2593226A24500000
    40 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut2593226A25000000
    45 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut1093226A2550000
    50 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut1093226A2600000
     
    M10 × 1.5 mm
    25 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A35000000
    30 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A35500000
    35 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A36000000
    40 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A36500000
    45 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A37000000
    50 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A37500000
     

    Medium-Strength SAE Grade 5 Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Medium-Strength SAE Grade 5, Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Medium-Strength SAE Grade 5, Square Neck.
    Made from Grade 5 steel, these bolts are suitable for fastening most machinery and equipment. They have a smooth, low-profile head that provides a flush fit when installed. They're commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, but can also be used in leveling and work-holding applications. A square neck keeps these bolts from turning when tightening a nut. They are zinc yellow-chromate plated to resist corrosion in wet environments. Grade 5 steel bolts are marked with three radial lines. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A410000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A41100000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A41200000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut1094650A41300000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A4140000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A4150000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A41600000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A41700000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"120,000Nut1094650A41800000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"120,000Nut594650A4190000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A4200000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A42100000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A42200000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut194650A4230000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4240000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4250000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4260000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4270000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4280000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4290000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4300000
    3 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4310000
    4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4320000
     

    Stainless Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Square Neck.
    Made from stainless steel, these chemical-resistant bolts have a square neck that keeps them from turning when tightening a nut. They're commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    18-8 Stainless Steel—18-8 stainless steel bolts have good chemical resistance and may be mildly magnetic.
    316 Stainless Steel—316 stainless steel bolts are more corrosion resistant than 18-8 stainless steel bolts. They have excellent resistance to chemicals and salt water.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A450000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A45200000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A45400000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut592361A45500000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut192361A4110000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4120000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4130000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4140000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4160000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut192361A4630000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut192361A4650000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4670000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4690000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4710000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4180000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.39"0.22"70,000Nut192361A4220000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4230000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4260000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4280000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4240000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A4350000
    2 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A42500000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A47400000
     
    1/2"-13
    1 1/2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.28"70,000Nut192361A43100000
    2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A43300000
    2 1/2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A43400000
    3"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A47500000
     
    M6 × 1 mm
    20 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut192361A4530000
    30 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut192361A4780000
    40 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut192361A4570000
     
    M8 × 1.25 mm
    20 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut192361A4580000
    25 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut192361A4590000
    35 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut192361A4620000
    50 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut192361A4810000
     
    M10 × 1.5 mm
    35 mmFully ThreadedCoarse
    30 mm3.7 mm10.83 mm5.7 mm70,000Nut192361A46800000
    50 mmFully ThreadedCoarse
    30 mm3.7 mm10.83 mm6.4 mm70,000Nut192361A47200000
     
    316 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4360000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4370000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4390000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"100,000Nut192361A4420000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"100,000Nut192361A44300000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"100,000Nut192361A44500000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"100,000Nut192361A44700000
     

    Low-Strength SAE Grade 2 Steel Ribbed-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Ribbed Neck.
    Image of Product. Back orientation. Elevator Bolts. Ribbed Neck.
    Ribs under the head dig into the surface of soft metal and plastic to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    Black Oxide—Black-oxide steel bolts are mildly corrosion resistant in dry environments.
    Zinc Plated—Zinc-plated steel bolts resist corrosion in wet environments.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Dia.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Black Oxide Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A11000000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1300000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1400000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut2590432A15000000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1090432A1600000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1090432A1700000
     
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A2400000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24400000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24600000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut2591488A36300000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1091488A3650000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1091488A3680000
     

    Stainless Steel Ribbed-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Ribbed Neck.
    Image of Product. Back orientation. Elevator Bolts. Ribbed Neck.
    Ribs under the head dig into the surface of soft metal and plastic to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. 18-8 stainless steel bolts have good chemical resistance and may be mildly magnetic. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Dia.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A11000000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1300000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1400000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1500000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1600000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1700000
     

    Low-Strength SAE Grade 2 Steel Fanged Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Fanged Bolt.
    Image of Product. Back orientation. Elevator Bolts. Fanged Bolt.
    Sharp teeth bite into the surface of wood, rubber belting, and other soft materials to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    Zinc Plated—Zinc-plated steel bolts resist corrosion in wet environments.
    Head
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A12800000
    1"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1290000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1300000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1310000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1320000
    2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1330000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1340000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1350000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1360000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1370000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1380000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1390000
    2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1400000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1410000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1420000
     
    3/8"-16
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1430000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1440000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1450000
    2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1460000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1480000
     
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24000000
    1"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24200000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24400000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24600000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1010000
    2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1020000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1040000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2830000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2850000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2870000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1060000
    2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A29100000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1080000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1090000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A32600000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A32800000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A33000000
    2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A33200000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1110000
    3"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut192221A1130000
     
    M6 × 1 mm
    25 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1140000
    30 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1150000
    35 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1160000
     
    M8 × 1.25 mm
    25 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1180000
    35 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1200000
    40 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1210000
     
    M10 × 1.5 mm
    30 mmFully ThreadedCoarse
    33 mm3.5 mm70,000Nut592221A1240000
     
    back to top