Immediately cut power with a single push. These switches meet EN 418 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. They're rated IP66, IP69K, NEMA 3S, NEMA 4X, and NEMA 13, and are UL and C-UL Recognized Components. Switches include enough contact blocks to control the number of circuits listed. Contact blocks are rated IP20 and are UL and C-UL Listed.

Key reset switches are keyed alike, so if you buy multiple switches they will all reset with the same key.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications. These switches immediately cut power with a single push. All meet EN 60947-5-5 for compliance with European machine directives for emergency stop applications. They have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. These switches meet American, Canadian, European, and other global safety requirements. They’re rated NEMA 4X, NEMA 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying.

Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

When-on illuminated switches light up when you push the button, so you can tell if the power has been cut.

Continuously illuminated switches stay lit once installed for high visibility in dark areas.

For technical drawings and 3-D models, click on a part number.

Immediately cut power with a single push. These switches are rated for protection from low-pressure streams of water and oil/coolant spraying. They have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. Switches include enough contact blocks to control the number of circuits listed.

Turn twist switches back on by twisting the button and pull switches by pulling it. Add an optional lockout on either kind to cover the button and prevent changes its position.

Switches with lockout latch when you depress the button, and can be locked in that position using a lockout or padlock with a 9/32" shackle diameter.

Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

Additional contact blocks (sold separately) can be added to control more circuits, or to replace the included contact block.

Immediately cut power with a single push. These switches meet EN 418 for compliance with European machine directives for emergency stop applications. They're rated NEMA 4, 13, and IP65 for protection from washdowns and oil/coolant spraying.

Key reset switches are keyed alike, so if you buy multiple switches they will all reset with the same key.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying. Housed in a yellow enclosure for quick identification, they immediately cut power with a single push. They meet EN 418 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick.

Key reset switches are keyed alike, so if you buy multiple switches they will all reset with the same key.

Switches with a power indicator alert you from the front and sides when the switch has been actuated.

Switches with a guard prevent accidental actuation. For extra security, lock the button in the off position with a padlock (not included) to stop these switches from being reset or turned on during machine repairs.

For technical drawings and 3-D models, click on a part number.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying. Housed in a yellow enclosure for quick identification, they immediately cut power with a single push. They meet EN 60947-5-1 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. UL listed and CSA certified, they also meet American and Canadian safety standards. The front of these switches is UL recognized.

Key reset switches stop you from accidentally resetting the switch before you’ve dealt with the emergency. They’re keyed alike, meaning they all open with the same key.

Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

For technical drawings and 3-D models, click on a part number.