McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    6 Products

    Temperature and Humidity Transmitters

    Image of Product. Front orientation. Temperature and Humidity Transmitters. Temperature and Humidity Transmitters.
    Image of Specification. A-Code, 4-Pole Male. Front orientation. Temperature and Humidity Transmitters. Temperature and Humidity Transmitters.

    A-Code,

    4-Pole

    Male

    These sensors measure temperature and humidity, then send that information to your PLC or controller to regulate heating and cooling equipment, alarms, and data recorders. Choose a sensor that works with your digital IO-Link or analog 4-20 mA system. Clip it to a DIN rail or mount it to a surface, and use the micro M12 plug to connect the sensor to your controller. These sensors are often installed in enclosures.
    Sensors meet American, Canadian, and European safety standards. Rated IP20, they’re designed so fingers can’t reach the electrical parts inside and get shocked. They also meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.
    Temperature
    Relative
    Humidity
    Range
    Tolerance
    Range
    Tolerance
    Communication
    Protocol
    Output Current
    Range, mA
    Voltage,
    V DC
    Ht.
    Wd.
    Dp.
    Electrical
    Connection
    For DIN
    Rail Ht., mm
    Mounting Fasteners
    Included
    Enclosure
    Rating
    Certification
    Each
    -40° F to 140° F
    -40° C to 60° C
    -1.8° F to 1.8° F
    -1° C to 1° C
    0% to 100%-4% to 4%4 to 20245 1/2"1 1/2"1 1/2"M1235NoIP20
    CE Marked, UL Recognized Component, VDE Certified, C-UL Recognized Component
    7106N110000000
    -40° F to 175° F
    -40° C to 80° C
    -0.54° F to 0.54° F
    -0.3° C to 0.3° C
    0% to 100%-3% to 3%IO Link245 1/2"1 1/2"1 1/2"M1235NoIP20
    CE Marked, UL Recognized Component, VDE Certified, C-UL Recognized Component
    7106N12000000
     

    Wireless Temperature and Humidity Transmitters

    Image of ProductInUse. Front orientation. Temperature and Humidity Transmitters. Wireless Temperature and Humidity Transmitters.
    Use smartphones and tablets to monitor humidity and temperature within your system or facility. Connect these battery-powered transmitters to your smart device via Bluetooth, and receive data to ensure workplace conditions are suitable for processes, inventory, or personnel. Good for preventative maintenance and route-based monitoring, these transmitters let you choose how frequently you receive the data, and they’ll notify your device when humidity and temperature levels go outside of your thresholds. Download the app, set your parameters, and collect data from up to 300 ft. away. Rated IP65, they are protected against dust and washdowns.
    Turn your transmitter into a portable monitoring system by attaching a quick coupling (not included). This allows fast, temporary connections for on-the-go measurements in different locations.
    Temperature
    Relative
    Humidity
    Connection
    Type
    Range,
    ° F
    Accuracy
    Range
    Accuracy
    Response
    Time, sec.
    Pipe
    Size
    Thread
    Type
    Gender
    Wireless
    Range, ft.
    Ht.
    Wd.
    Batteries
    Included
    Enclosure
    Rating
    Manufacture (Series)
    Each
    Bluetooth Connection
    14 to 185±1° F0% to 100%±5%101/4
    NPT
    Male3002 11/16"1 7/8"YesIP65
    Parker (Sensonode Blue)7129N110000000
     

    Environmental-Monitoring Modules for Development Boards

    Keep equipment running and working conditions safe—these modules add air quality tracker capabilities to your development board. Each module gathers data on air conditions, ranging from temperature and humidity to carbon dioxide or volatile organic compound (VOC) levels. These modules easily connect to boards and other components with Qwiic cords or by soldering.
    Modules with Temperature, Humidity, and Air Quality Sensor
    Image of Product. Front orientation. -10° C to 60° C. Environmental-Monitoring Modules for Development Boards .
    Modules with a temperature, humidity, and air quality sensor help you make sure the air is healthy in your facility. They directly measure the amount of carbon dioxide in the air.
    Output Data
    Resolution,
    bit
    Freq.,
    Hz
    Measures
    Temp. Range,
    ° C
    RH
    Carbon Dioxide Concentration
    Measured, ppm
    Input Voltage,
    V DC
    I2C
    Address
    Connection
    Method
    No. of Qwiic
    Connections
    Lg.
    Wd.
    Each
    I²C Communication Protocol—Qwiic Connection
    160.2Temperature, Relative Humidity, Carbon Dioxide Level-10 to 600% to 100%0 to 40,0002.4 to 5.50x62Solder21"1"7126N11000000
     
    Modules with Temperature, Humidity, and Barometer Sensor
    Image of Product. Front orientation. -40° C to 85° C. Environmental-Monitoring Modules for Development Boards .
    Modules with a temperature, humidity, and barometer sensor are often used as part of an automated system that runs equipment based on the weather. For instance, you can use them in a system that will turn on a humidifier if humidity dips below a certain level.
    Measures
    Temp. Range,
    ° C
    RH
    Barometric Pressure,
    in. Hg
    Input Voltage,
    V DC
    I2C
    Address
    Connection
    Method
    No. of Qwiic
    Connections
    Lg.
    Wd.
    Each
    I²C Communication Protocol—Qwiic Connection
    Temperature, Relative Humidity, Barometric Pressure-40 to 850% to 100%8.9 to 32.51.71 to 3.60x76
    0x77
    Solder21"1"7126N12000000
     
    Modules with Temperature, Humidity, Air Quality, and Barometer Sensor
    Image of Product. Front orientation. Development Board Sensor Modules. Environmental-Monitoring Modules for Development Boards , Air Quality Sensor.
    Modules with a temperature, humidity, air quality, and barometer sensor give you the most comprehensive picture of air conditions in your facility. They directly measure the amount of VOCs and give you an estimated measurement of carbon dioxide based on VOC levels. They monitor air quality using Germany’s Air Quality Index (AQI).
    Measures
    Temp. Range,
    ° C
    RH
    Equiv. Carbon Dioxide
    Concentration Measured, ppm
    Total Volatile
    Organic Compound, ppb
    Barometric Pressure,
    in. Hg
    Input Voltage,
    V DC
    I2C Address
    Connection
    Method
    No. of Qwiic
    Connections
    Lg.
    Wd.
    Each
    I²C Communication Protocol—Qwiic Connection
    Temperature, Relative Humidity, Equivalent Carbon Dioxide, Total Volatile Organic Compound Concentration, Air Quality Index, Barometric Pressure0 to 6520% to 80%400 to 650,0000 to 65,0008.9 to 32.51.2 to 3.60x52
    0x53
    0x76
    0x77
    Solder21"1"7126N14000000
     
    back to top