About Duct Hose
More
Crush-Resistant Flexible Duct Hose for Exhaust Fumes
- Flexible
- Color: Black
- Temperature Range: -40° to 400° F
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over. Use to vent carbon monoxide exhaust fumes while engine idling. Hose is also for use with smoke and water-based paint fumes.
2" to 4" ID hose has one end that is slightly larger than the other end. To make longer lengths, screw the smaller end of one hose into the larger end of another hose of the same size. When your application requires frequent movement or pulling, use a straight connector.
5" and 6" ID hose has two ends that are the same size. To make longer lengths, screw the ends of the hose into a straight connector.
For technical drawings and 3-D models, click on a part number.
| ID (OD) | Bend Radius | Material Thick. | Interior Surface Texture | Lg., ft. | Each | |
EPDM Rubber | ||||||
|---|---|---|---|---|---|---|
| 2" (2 7/16") × 2 1/16" (2 11/16") | 3" | 0.156" | Ribbed | 11 | 0000000 | 0000000 |
| 2 1/2" (3") × 2 11/16" (3 3/8") | 3" | 0.156" | Ribbed | 11 | 0000000 | 000000 |
| 3" (3 1/2") × 3 1/16" (3 13/16") | 4" | 0.156" | Ribbed | 11 | 0000000 | 000000 |
| 4" (4 13/16") × 4 3/16" (5 3/16") | 4" | 0.156" | Ribbed | 11 | 0000000 | 000000 |
| 5" (6") | 4" | 0.156" | Ribbed | 11 | 0000000 | 000000 |
| 6" (7") | 5" | 0.156" | Ribbed | 11 | 0000000 | 000000 |
Use on vehicles with oval or twin-tip exhaust pipes.
The 3" × 6" adapter fits oval tailpipes that are 2 1/2" × 5 1/2" and smaller, or twin tailpipes up to 2 1/2" dia. each.
The 3 1/2" × 8 1/2" adapter fits oval tailpipes that are 3" × 8" and smaller, or twin tailpipes up to 3" dia. each.
Thread duct hose onto these connectors to create longer lengths.
Note: EPDM rubber connectors are not strong enough for hanging applications.
Abrasion-Resistant Duct Hose for Liquids
- Flexible
- Color: Black or Gray
- Temperature Range: -40° to 300° F
If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion. Hose is for use with water and noncorrosive acids.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Cuff ID | Bend Radius | Max. Vacuum | Material Thick. | Interior Surface Texture | Lg., ft. | Each | |
Black EPDM Rubber | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 1/2" | 2" | 2" | 1" | 20 in. of Hg @ 72° F | 1/8" | Ribbed | 10 | 000000 | 000000 |
| 2" | 2 1/2" | 2" | 2" | 20 in. of Hg @ 72° F | 1/8" | Ribbed | 10 | 000000 | 00000 |
Gray EPDM Rubber | |||||||||
| 1 1/2" | 2" | 2" | 1" | 20 in. of Hg @ 72° F | 1/8" | Ribbed | 10 | 000000 | 00000 |
| 2" | 2 1/2" | 2" | 2" | 20 in. of Hg @ 72° F | 1/8" | Ribbed | 10 | 000000 | 000000 |
Push the small end of the fitting into your duct hose to connect to a portable vacuum or other equipment.
For Hose ID | ID | OD | |||||||
|---|---|---|---|---|---|---|---|---|---|
| A | B | A | B | A | B | Temperature Range, ° F | Color | Each | |
Plastic | |||||||||
| 1 1/2", 2" | 2" | 1 13/16" | 2 1/16" | 2" | 2 1/4" | -30° to 160° | Black | 000000 | 00000 |