Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

These seals have an EPDM foam rubber bulb.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.

These O-rings also resist ethanol and ethylene glycol.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.

These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.

Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.

Also resistant to salt water.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

When working with water and steam, these gaskets ensure a tight seal.

The built-in screen is made of corrosion-resistant 316 stainless steel and provides inline straining.

Form a tight seal on cam-and-groove hose connections without fear of contaminating your food processing line. The metal additive in these gaskets can be picked up by a metal detector, so you can find and remove them if they fall into your line.

These gaskets provide a tight seal in steam applications.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Keep grommets of various sizes on hand to solve whatever problems arise.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Close the gap between the bottom of an overhead door and the floor.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Patch and seal roofs, window frames, gutters, and vents with this conformable tape.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

Bond most materials without the strong odor of other epoxy adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

Also known as super glue, these adhesives bond quickly.

Make strong, instant bonds on a variety of materials—but not your skin.

Form bonds without the strong odor of other instant-bond adhesives.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

These adhesives withstand temperatures up to 480° F.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Install vinyl and rubber treads on stairs with this adhesive.

Adhere vinyl and rubber wall bases to wood, drywall, and concrete.

Improve instant-bond adhesive performance on hard-to-bond materials.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.