McMaster-Carr logo
    Filter by
    Formulation
    Manufacturer Model Name
    Material
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Quick-Set Epoxy Structural Adhesives

    Image of Product. Bottle. Front orientation. Bottle.
    Image of Product. Cartridge. Front orientation. Cartridge.

    Bottle

    Cartridge

    Image of Product. Single-Use Packet. Front orientation. Single-Use Packet.
    Image of Product. Syringe. Front orientation. Syringe.

    Single-Use Packet

    Syringe

    For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Gel—Stick in place and keep their exact shape with no flowing or sagging.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Pkg.
    Qty.
    Pkg.
    Devcon
     
    1 Minute Epoxy
    142771.69Cartridge60 sec.21,60021:1Gel70,000-40 to 200Masonry, Metal, Plastic, Wood166215A32000000
     
    5 Minute Epoxy
    1420015Bottle5 min.121,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood17524A400000
    142400.84Syringe5 min.482,50021:1GelNot Rated-40 to 200Masonry, Metal, Plastic, Wood17592A3100000
    142500.84Syringe5 min.121,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood17541A7600000
    142651.69Cartridge5 min.482,50021:1GelNot Rated-40 to 200Masonry, Metal, Plastic, Wood166215A2300000
    142701.69Cartridge5 min.121,90021:1Thick Liquid10,000-40 to 200Masonry, Metal, Plastic, Wood166215A3100000
     
    Other Structural Adhesives
    —0.47Syringe4 min.242,500Not Rated1:1Gel13,000-40 to 200Metal, Plastic, Rubber17670A2200000
    —1.65Syringe60 sec.32,500121:1Thick Liquid15,000-45 to 250Metal, Plastic, Rubber17541A8200000
    —6.76Cartridge3 min.242,500Not Rated1:1Gel13,000-40 to 200Composite, Metal, Plastic, Rubber17646A1300000
    —8Bottle3 min.243,00011:1Thick Liquid40,00015 to 180Glass, Masonry, Metal, Plastic, Rubber17508A4100000
    —32Bottle3 min.243,00011:1Thick Liquid40,00015 to 180Glass, Masonry, Metal, Plastic, Rubber17508A5100000
    ——Single-Use Packet3 min.243,00011:1Thick Liquid40,00015 to 180Masonry, Metal, Plastic, Rubber107538A1100000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges74695A1200000
    Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Loctite® Cartridges7451A610000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000
    Dispensing Gun for 6.7 fl. oz Cartridges7622T2700000

    Epoxy Structural Adhesive Assortments

    Image of Product. Front orientation. Structural Adhesives. Epoxy Structural Adhesive Assortments.
    Keep a variety of epoxy adhesives on hand for a range of applications and materials. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
    Component Included
    Each
    General Purpose (Masonry, Metal, Plastic, Rubber)
    Nonsagging (Masonry, Metal, Wood)
    Slow-Set (Composite, Metal)
    Quick-Set (Masonry, Metal, Rubber)
    High Strength (Metal, Rubber)
    Waterproof (Composite, Masonry, Metal)
    Optically Clear (Glass, Metal)
    Machinable (Composite, Metal)    		7538A16000000

    Slow-Set Epoxy Structural Adhesives

    Image of Product. Bottle. Front orientation. Bottle.
    Image of Product. Can. Front orientation. Can.
    Image of Product. Cartridge. Front orientation. Cartridge.
    Image of Product. Single-Use Packet. Front orientation. Single-Use Packet.

    Bottle

    Can

    Cartridge

    Single-Use Packet

    Take your time positioning parts—these epoxies remain adjustable for at least 90 minutes before setting. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Specifications Met
    For Joining
    Pkg.
    Qty.
    Pkg.
    Loctite®
    M-121HP1.69Cartridge2244,800Not Rated2:1Thick Liquid11,000-65 to 300ISO 10993Ceramic, Glass, Metal, Plastic, Rubber, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Rubber, Rubber to Glass17370A37000000
     
    Other Structural Adhesives
    —8Bottle2243,280Not Rated1:1Thick Liquid30,000-25 to 200—Glass, Masonry, Metal, Plastic, Rubber17508A4200000
    —16Can218Not RatedNot Rated2:1Thick Liquid5,000-90 to 290FDA Compliant 21 CFR 175.105,
    FDA Compliant 21 CFR 175.300    		Composite, Glass, Metal, Plastic, Rubber166525A22000000
    —32Bottle2243,280Not Rated1:1Thick Liquid30,000-25 to 200—Glass, Masonry, Metal, Plastic, Rubber17508A5200000
    ——Single-Use Packet2243,280Not Rated1:1Thick Liquid30,000-25 to 200—Glass, Masonry, Metal, Plastic, Rubber107538A1200000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges74695A1200000
    Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges74695A101000000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000

    Epoxy Structural Adhesives for Harsh Environments

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.
    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Model Number E-120HP—Resist acetone, fuel, and oil. These adhesives also bond dissimilar materials and withstand rapid changes in temperature.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Environment
    For Joining
    Each
    Loctite®
    E-120HP1.69Cartridge2 hr.244,300Not Rated2:1Thick Liquid30,000-65 to 250Corrosive, Harsh, SubmersibleCeramic, Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber6430A24000000
    E-120HP6.76Cartridge2 hr.244,300Not Rated2:1Thick Liquid30,000-65 to 250Corrosive, Harsh, SubmersibleCeramic, Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber1765A4400000
    E-120HP13.5Cartridge2 hr.244,300Not Rated2:1Thick Liquid30,000-65 to 250Corrosive, Harsh, SubmersibleCeramic, Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber1765A43000000
     
    Other Structural Adhesives
    —1.69Cartridge30 min.24360Not Rated2:1Thick Liquid7,000-50 to 350Corrosive, Harsh, SubmersibleComposite, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite7513A300000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges74695A1200000
    Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Loctite® Cartridges7451A610000
    Dispensing Gun for 6.76 fl. oz. Cartridges7451A51000000
    Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges74695A101000000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000
    Dispensing Gun for 13.5 fl. oz. Cartridges7451A52000000
    Replacement Plunger for 13.5 fl. oz. Cartridges (2:1 Mix Ratio)74695A430000

    Epoxy Structural Adhesives

    Image of Product. Single-Use Packet. Front orientation. Single-Use Packet.
    Image of Product. Syringe. Front orientation. Syringe.

    Single-Use Packet

    Syringe

    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Pkg.
    Qty.
    Pkg.
    1.65Syringe50242,450261:1Thick Liquid40,000-45 to 250Metal, Plastic, Rubber17541A83000000
    —Single-Use Packet45242,900Not Rated1:1Thick Liquid3,7000 to 120Composite, Metal107538A1400000
     

    Epoxy Structural Adhesives for Hard-to-Bond Materials

    Image of Product. Bottle. Front orientation. Bottle.
    Image of Product. Cartridge. Front orientation. Cartridge.

    Bottle

    Cartridge

    Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Includes
    For Joining
    Each
    1.69Cartridge3024360Not Rated2:1Thick Liquid9,000-50 to 350—Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass7513A1000000
    1.69Cartridge3024360Not Rated2:1Thick Liquid9,500-50 to 3501:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching SolutionPlastic7607A15000000
    1.69Cartridge3024360Not Rated2:1Thick Liquid9,500-50 to 3501:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing TraysPlastic7807A11000000
    1.69Cartridge9072Not RatedNot Rated1:1Thick Liquid6,000-85 to 270—Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Glass, Plastic to Rubber, Rubber to Glass, Wood to Glass7513A600000
    48Bottle3024360Not Rated2:1Thick Liquid9,000-50 to 350—Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass7513A2000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Loctite® and Devcon Cartridges74695A1200000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000

    Light-Activated Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Light-Activated Surface Fillers, Epoxy, Bottle.

    Epoxy

    Bottle

    Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
    Epoxy—Epoxy fillers provide better adhesion and more corrosion resistance than polyester plastic fillers.
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    3.5Bottle15PuttyNo1"24 in² @ 1/4"1/2"Yes-40270AmberDrill, Sand, TapAluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood73475A14000000
     

    Heat-Transfer Epoxy Potting Compounds

    Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
    Jar and Syringe Potting Compounds—Extra Hard
    Image of Product. Front orientation. Potting Compounds. Heat-Transfer Epoxy Potting Compounds, Jar, Syringe.
    Dry Time
    Temp.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Min.
    Max.,
    ° F
    Heating Req. to Reach
    Full Strength
    For Use On
    Color
    Each
    1.5Thin Liquid30264500.21Not Rated5001 hr. @ 250°F Then 1 hr. @ 350°FAluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, Ceramic, GlassAmber7563A52000000
    Jar and Bottle Potting Compounds—Extra Hard
    Image of Product. Front orientation. Potting Compounds. Heat-Transfer Epoxy Potting Compounds, Bottle, Jar.
    Dry Time
    Temp.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Min.
    Max.,
    ° F
    Heating Req. to Reach
    Full Strength
    For Use On
    Color
    Each
    16Thin Liquid30264500.21Not Rated5001 hr. @ 250°F Then 1 hr. @ 350°FAluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, Ceramic, GlassAmber7563A510000000

    Low-Odor Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.
    Image of Product. Syringe. Front orientation. Syringe.

    Cartridge

    Syringe

    Even in enclosed or poorly ventilated spaces, these epoxies form bonds without the noticeable odor other structural adhesives leave behind.
    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    Lord
    363A/B1.69Cartridge361,40051:1Thick Liquid12,750-30 to 300Composite, Glass, Metal, Plastic, Rubber, Wood66195A23000000
     
    Other Structural Adhesives
    —1.65Syringe4242,200181:1Thick Liquid15,000-45 to 250Metal, Plastic, Rubber, Wood7541A8400000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Lord Cartridges74695A12700000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000

    Concrete Bonding Construction Adhesives

    Image of Product. Front orientation. Construction Adhesives. Concrete Bonding Construction Adhesives.
    Bond new concrete to old concrete, or use this epoxy as a primer for epoxy coatings on concrete surfaces. Mix the amount you need; the size listed is the combined total of the two parts.
    Container
    Size,
    gal.
    Type
    Mixing
    Req.
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Mix
    Ratio
    Consistency
    Temp. Range,
    ° F
    For
    Joining
    Color
    Each
    Epoxy
    0.75CanYes30122:1Thick Liquid50 to 100MasonryAmber9432T57000000
     

    Light-Activated Epoxy Potting Compounds

    Image of Product. Front orientation. Potting Compounds. Light-Activated Epoxy Potting Compounds.
    Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat. Since they’re epoxy, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. You need a mixer nozzle (not included) and a gun and plunger (both sold separately) to dispense. The nozzle lets you apply these compounds precisely.
    For maximum effectiveness, these compounds need to be heat cured after they’re cured with UV light. Overall dry time includes heat curing at 149° F.
    Dry Time
    Mfr. Model
    No.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Mixer Nozzle
    Included
    Mix
    Ratio
    Light Intensity Req.
    to Reach Full Strength
    Cure
    Type
    Dielectric
    Strength
    Thermal
    Conductivity
    Temp. Range,
    ° F
    For Use On
    Color
    Clarity
    Each
    Loctite® Cartridge Potting Compounds—Extra Hard
    33361.4Thick Liquid516No4:160 sec. @ 30 mW/cm²UV LightNot RatedNot Rated-65 to 350Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, FiberglassAmberClear1765A36000000
     
    Accessories for Potting Compounds
    Guns
    Image of Product. Front orientation. Adhesive Dispensing Guns. Light-Activated Epoxy Potting Compounds.
    For Cartridge
    Size, fl. oz.
    Includes
    Each
    1.42, 1.691:1 and 2:1 Mix Ratio Plungers1773A32000000
    Cartridge Plungers
    Image of Product. Front orientation. Adhesive Dispensing Gun Cartridge Plungers. Light-Activated Epoxy Potting Compounds.
    For Cartridge
    Size, fl. oz.
    Mix
    Ratio
    Each
    1.42, 1.694:174695A4400000

    Fuel-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Fuel-Resistant Surface Fillers.
    Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
    1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
    3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
    Container
    Temp.
    Range, ° F
    Size,
    pt.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass2450N12000000
    3Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass2450N11000000
     

    Optically Clear Epoxy Potting Compounds

    Image of Product. Front orientation. Potting Compounds. Optically Clear Epoxy Potting Compounds, Cartridge.

    Cartridge

    Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
    Dry Time
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Mixer Nozzle
    Included
    Mix
    Ratio
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Temp. Range,
    ° F
    For Use On
    Color
    Clarity
    Each
    Cartridge Potting Compounds—Extra Hard
    1.7Thick Liquid4024No1:15000.24-65 to 275Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Plastic, Rubber, Composite, Fiberglass, Ceramic, GlassAmberClear7369A37000000
     
    Accessories for Potting Compounds
    Guns
    For Cartridge Size, fl. oz.
    Includes
    Each
    1.42, 1.58, 1.691:1 and 2:1 Mix Ratio Plungers74695A71000000
    Nozzles
    For Cartridge
    Size, fl. oz.
    No. of Mixing
    Elements
    Each
    1.42, 1.692074695A1200000
    back to top