McMaster-Carr logo
    Filter by
    Peel Strength
    Environment
    Manufacturer
    Mixing Required
    Shear Strength
    Fitting Connection
    Manufacturer Model Number
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    17 Products

    Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
    Model Number 305-1/2—Do not contain solvents.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    Lord
    305-1/21.69Cartridge60482,240841:1Thick Liquid23,250-30 to 250Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass66195A31000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.69 fl. oz. Lord Cartridges74695A12700000
    Dispensing Gun for 1.69 fl. oz. Cartridges74695A7100000

    Insulating Adhesives for Electronics

    Secure hardware on circuit boards while insulating current.
    Epoxy
    Image of Product. Front orientation. Electrically Insulating Adhesives. Insulating Adhesives for Electronics, Epoxy, Single-Use Packet.

    Single-Use

    Packet

    Epoxy adhesives are two-part adhesives that need to be mixed. The size listed is the combined total of the two parts.
    Model Number 2151—Loctite® 2151 resist salts, mild acids, and oils. They can also handle sudden impacts and shocks.
    ASTM E595—Adhesives that meet ASTM E595, a standard used by NASA, release almost no volatile emissions that could damage sensitive electronics, even in a vacuum.
    Container
    Temp.,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Thermal Conductivity,
    W/(m⋅°C)
    Mix
    Ratio
    Consistency
    Min.
    Max.
    Color
    Clarity
    Specs.
    Met
    For Joining
    Each
    Loctite® Adhesive
    21510.1Single-Use Packet4540.95100:9.5Paste-90235BlueOpaqueASTM E595Metal, Plastic74755A111000000
    21510.4Single-Use Packet4540.95100:9.5Paste-90235BlueOpaqueASTM E595Metal, Plastic74755A11200000
     

    Epoxy Protective Coatings for Metal

    Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight.
    Thinners cannot be sold to Canada due to import regulations.
    Epoxy—Can
    Image of Product. Front orientation. Protective Coatings. Epoxy Protective Coatings for Metal, Epoxy—Can.
    2 gal. Container—Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
    Cannot Be Sold To—Coatings that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
    Dry
    Time, hr.
    Container
    Size, gal.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Mixing
    Req.
    Mix
    Ratio
    Application Time
    After Mixing, hr.
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Cannot Be Sold To
    Color
    Each
    2Solvent Based816220 ft² @ 5 milYes1:12.530050 to 100YesSteel, Iron, Masonry, ConcreteLos Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CAGloss Blue7903T10000000
     
    Thinners
    Container
    Size, gal.
    Container
    Type
    Solution
    Type
    Cannot Be
    Sold To
    Each
    1CanSolvent BasedCanada7903T59000000

    Air Brush Paint

    Image of Product. Front orientation. Paint. Air Brush Paint.
    Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.
    Dry Time
    Container
    Size, fl. oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Max.
    Temp.
    For Use
    Outdoors
    For Use
    On
    Color
    (Appearance)
    Each
    Acrylic Plastic—Bottle
    1Water Based20242 ft² @ 1 milNot RatedYesFabricBlue (Satin)7867T500000
     

    Fine-Particle Abrasion-Resistant Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. Fine-Particle Abrasion-Resistant Surface Fillers for Metal, Epoxy, Can.

    Epoxy

    Can

    For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Loctite® Nordbak Pneu-Wear
    PC 74556Can103PasteYes2:1310 in² @ 1/4"1/4"Yes-20220BlueMachine, Drill, Sand, Saw, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium1830A110000000
     

    Line Marking Paint

    Image of Product. Front orientation. Paint. Line Marking Paint, Aerosol Can.

    Aerosol

    Can

    Mark traffic lanes, parking lots, and factory floors.
    Acrylic Plastic—Acrylic plastic paint withstands abrasion in high-traffic areas. It’s also known as latex paint.
    Dry Time
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Stripe Wd.
    Spray
    Position
    Max. Temp.,
    ° F
    Application
    Temp. Range, ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    1-11
    12-Up
    Acrylic Plastic—Aerosol Can
    18Solvent Based20870 ft. @ 2"Inverted9065 to 80YesConcrete, AsphaltBlue (Semi-Gloss)9192T1000000000000
     
    Paint Line Marking Machines
    Each
    2"-4" Stripe Wd. Paint Dispenser for 18-oz. Aerosol Cans 36495T5000000
    2"-4" Stripe Wd. Large-Job Paint Dispenser for 18-oz. Aerosol Cans36495T81000000

    Paint for Drywall

    Image of Product. Front orientation. Paint. Paint for Drywall.
    This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices. Apply with a brush, roller, or sprayer.
    Dry Time
    Container
    Size, gal.
    Solution
    Type
    Touch,
    min.
    Overall,
    hr.
    Approx. Coverage
    @ Thk.
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    Each
    Acrylic Plastic—Can
    1Water Based304240 ft² @ 2 mil200YesSteel, Masonry, Concrete, Drywall, WoodBlue (Gloss)7709T1000000
     

    Large-Particle Abrasion-Resistant Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. Large-Particle Abrasion-Resistant Surface Fillers for Metal, Epoxy, Jar, Can.

    Epoxy

    Jar, Can

    For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Net Wt.,
    lb.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Loctite® Nordbak Wearing Compound
    PC 95996Jar, Can103PasteYes2:1310 in² @ 1/4"1/4"Yes-20220BlueMachine, Drill, Sand, Saw, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium1830A90000000
     

    Drip-Free Paint for Metal

    Image of Product. Front orientation. Paint. Drip-Free Paint for Metal.
    This acrylic plastic paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.
    Dry
    Time, min.
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Spray
    Position
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    1-5
    6-Up
    Acrylic Plastic—Aerosol Can
    12Water Based123015 ft² @ 1 milUpright150YesAluminum, Steel, Iron, WoodBlue (Gloss)2590N1000000000000
     

    Powder-Coating Touch-Up Paint for Metal

    Image of Product. Front orientation. Paint. Powder-Coating Touch-Up Paint for Metal.
    Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
    Dry
    Time, hr.
    Each
    Container
    Net Wt., oz.
    Solution
    Type
    Touch
    Overall
    Approx. Coverage
    @ Thk.
    Spray
    Position
    Max. Temp.,
    ° F
    For Use
    Outdoors
    For Use On
    Color
    (Appearance)
    1-5
    6-Up
    Acrylic Plastic—Aerosol Can
    16Solvent Based424144 ft² @ 2 milUpright120YesAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Iron, Galvanized Iron, Galvanized Steel, Titanium, SilverBlue (Gloss)2427N6000000000000
     
    back to top