Filter by
For Use On
For Joining
Performance
Cure Type
Consistency
Formulation
Maximum Temperature
Material
Minimum Temperature
Shear Strength
Clarity
Peel Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Adhesive Type
Epoxy Structural Adhesive Assortments
 |
Component Included | Each | ||
|---|---|---|---|
| General Purpose (Masonry, Metal, Plastic, Rubber) Nonsagging (Masonry, Metal, Wood) Slow-Set (Composite, Metal) Quick-Set (Masonry, Metal, Rubber) High Strength (Metal, Rubber) Waterproof (Composite, Masonry, Metal) Optically Clear (Glass, Metal) Machinable (Composite, Metal) | 7538A16 | 000000 |
Flexible Light-Activated Instant-Bond Adhesives
 |
Take your time to precisely align parts before bonding, and maintain flexibility afterward. These adhesives won't harden until you expose them to a compatible light source. They also remain elastic so the bond can bend without breaking.
Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Light Intensity Req. to Reach Full Strength | Cure Type | Consistency | Viscosity, cP | Max. Gap Size Filled | Elongation | Temp. Range, ° F | For Joining | Each | |||
| 1.69 | Bottle | 5 | 30 | 5 sec. @ 100 mW/cm² | UV Light | Thin Liquid | 850 | 0.25" | Not Rated | 45 to 80 | Ceramic, Composite, Glass, Metal, Plastic, Rubber | 2454N1 | 000000 | ||
Slow-Set Epoxy Structural Adhesives
 |  |  |  |
Bottle | Can | Single-Use Packet | Tube |
Container | Strength | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Specifications Met | For Joining | Pkg. Qty. | Pkg. | |||
3M | |||||||||||||||||
Scotch-Weld | |||||||||||||||||
| 2216 | 3.3 fl. oz. | Tube | 90 min. | 7 day | 1,700 | 25 lbf/in. wd. | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A65 | 000000 | ||
| 2216 | 4 fl. oz. | Tube | 2 hr. | 30 day | 3,000 | 25 lbf/in. wd. | 1:1 | Thick Liquid | 10,000 | -65 to 350 | ASTM E595 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A78 | 00000 | ||
| 2216 | 26.6 fl. oz. | Can | 90 min. | 7 day | 1,700 | 25 lbf/in. wd. | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A66 | 000000 | ||
| 2216 | 53.3 fl. oz. | Can | 90 min. | 7 day | 1,700 | 25 lbf/in. wd. | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A67 | 000000 | ||
| 2216 | 64 fl. oz. | Can | 2 hr. | 30 day | 3,000 | 25 lbf/in. wd. | 1:1 | Thick Liquid | 10,000 | -65 to 350 | ASTM E595 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A8 | 000000 | ||
| 2216 | 1.66 gal. | Can | 90 min. | 7 day | 1,700 | 25 lbf/in. wd. | 2:3 | Thick Liquid | 81,000 | -65 to 350 | ASTM E595, DOD-A-82720 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 1 | 75045A68 | 00000000 | ||
Other Structural Adhesives | |||||||||||||||||
| — | 8 fl. oz. | Bottle | 2 hr. | 24 hr. | 3,280 | Not Rated | 1:1 | Thick Liquid | 30,000 | -25 to 200 | — | Glass, Masonry, Metal, Plastic, Rubber | 1 | 7508A42 | 00000 | ||
| — | 8 fl. oz. | Bottle | 3 hr. | 24 hr. | 2,800 | 24 lbf/in. wd. | 1:1 | Thick Liquid | 50,000 | -65 to 250 | — | Glass, Masonry, Metal, Plastic, Rubber | 1 | 7508A43 | 00000 | ||
| — | 32 fl. oz. | Bottle | 2 hr. | 24 hr. | 3,280 | Not Rated | 1:1 | Thick Liquid | 30,000 | -25 to 200 | — | Glass, Masonry, Metal, Plastic, Rubber | 1 | 7508A52 | 00000 | ||
| — | 32 fl. oz. | Bottle | 3 hr. | 24 hr. | 2,800 | 24 lbf/in. wd. | 1:1 | Thick Liquid | 50,000 | -65 to 250 | — | Glass, Masonry, Metal, Plastic, Rubber | 1 | 7508A53 | 00000 | ||
| — | — | Single-Use Packet | 2 hr. | 24 hr. | 3,280 | Not Rated | 1:1 | Thick Liquid | 30,000 | -25 to 200 | — | Glass, Masonry, Metal, Plastic, Rubber | 10 | 7538A12 | 00000 | ||
| — | — | Single-Use Packet | 3 hr. | 24 hr. | 2,800 | 24 lbf/in. wd. | 1:1 | Thick Liquid | 50,000 | -65 to 250 | — | Glass, Masonry, Metal, Plastic, Rubber | 10 | 7538A31 | 00000 | ||
Epoxy Structural Adhesives
|  |
Can | Cartridge |
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
Model Number 305-1/2—Do not contain solvents.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Specifications Met | For Joining | Each | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| 1838 | 57.6 | Can | 60 | 7 day | 2,000 | 4 lbf/in. wd. | 4:5 | Paste | 492,500 | -65 to 350 | ASTM E595, MIL-A-52194 | Composite, Glass, Metal, Plastic, Rubber, Wood | 75065A71 | 0000000 | ||
| 1838L | 64 | Can | 60 | 7 day | 2,000 | 4 lbf/in. wd. | 1:1 | Thick Liquid | 11,000 | -65 to 350 | — | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood | 75065A74 | 000000 | ||
Lord | ||||||||||||||||
| 305-1/2 | 1.69 | Cartridge | 60 | 48 hr. | 2,240 | 84 lbf/in. wd. | 1:1 | Thick Liquid | 23,250 | -30 to 250 | — | Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 66195A31 | 00000 | ||
Other Structural Adhesives | ||||||||||||||||
| — | 1.69 | Cartridge | 20 | 24 hr. | 2,500 | Not Rated | 2:1 | Thick Liquid | 35,000 | -65 to 260 | — | Ceramic, Composite, Glass, Metal, Plastic, Wood | 7524A161 | 00000 | ||
Epoxy Structural Adhesives for Hard-to-Bond Materials
| |
Bottle | Cartridge |
Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Includes | For Joining | Each | |||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,000 | -50 to 350 | — | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 7513A1 | 000000 | ||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,500 | -50 to 350 | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution | Plastic | 7607A15 | 000000 | ||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,500 | -50 to 350 | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays | Plastic | 7807A11 | 000000 | ||
| 48 | Bottle | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,000 | -50 to 350 | — | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 7513A2 | 000000 | ||
Quick-Set Epoxy Structural Adhesives
|
Single-Use Packet |
For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Pkg. Qty. | Pkg. | |||
| Single-Use Packet | 3 | 24 | 3,000 | 1 | 1:1 | Thick Liquid | 40,000 | 15 to 180 | Masonry, Metal, Plastic, Rubber | 10 | 7538A11 | 000000 | ||
Water-Resistant Surface Fillers
 |  |  |
Epoxy Can, Jar | Epoxy Tube | Epoxy Jar, Bottle |
Container | Temp. Range | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max., ° F | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||||
| 2 | Tube | 5 | 60 min. | Paste | Yes | 1:1 | 12 in² @ 1/4" | 1/2" | Yes | Not Rated | 200 | Gray | Machine, Drill, Sand, Saw, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood | 7521A19 | 000000 | ||
| 2 | Jar, Bottle | 20 | 24 hr. | Paste | Yes | 5:1 | 8 1/2 in² @ 1/4" | 1 1/2" | Yes | Not Rated | 185 | White | Machine, Drill, Sand, Saw, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood | 7521A15 | 00000 | ||
| 2 | Jar, Bottle | 20 | 24 hr. | Paste | Yes | 5:1 | 8 1/2 in² @ 1/4" | 1 1/2" | Yes | Not Rated | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood | 7521A17 | 00000 | ||
| 14 | Can, Jar | 20 | 24 hr. | Paste | Yes | 5:1 | 62 in² @ 1/4" | 1 1/2" | Yes | Not Rated | 185 | White | Machine, Drill, Sand, Saw, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood | 7521A16 | 00000 | ||
| 14 | Can, Jar | 20 | 24 hr. | Paste | Yes | 5:1 | 62 in² @ 1/4" | 1 1/2" | Yes | Not Rated | 250 | Gray | Machine, Drill, Sand, Saw, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood | 7521A18 | 00000 | ||
Epoxy Structural Adhesives for Harsh Environments
|
Cartridge |
With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Environment | For Joining | Each | |||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 7,000 | -50 to 350 | Corrosive, Harsh, Submersible | Composite, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite | 7513A3 | 000000 | ||
Surface Filler Patches
 |
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Container Type | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, min. | Mixing Req. | Mix Ratio | For Use Outdoors | Max. Temp., ° F | Color | Process After Hardening | For Use On | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Epoxy Surface Fillers | |||||||||||||||
| Patch | 4" | 6" | 1 | 30 | Yes | 1:1 | Yes | 425 | Clear | Sand | Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood | 74645A79 | 000000 | ||
Low-Odor Epoxy Structural Adhesives
 |
Syringe |
Even in enclosed or poorly ventilated spaces, these epoxies form bonds without the noticeable odor other structural adhesives leave behind.
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
| 1.65 | Syringe | 4 | 24 | 2,200 | 18 | 1:1 | Thick Liquid | 15,000 | -45 to 250 | Metal, Plastic, Rubber, Wood | 7541A84 | 000000 | ||
Construction Adhesives for Nosing
 |
Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.
Adhesives | Dispensing Gun | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Strength | ||||||||||||||||||
Size, fl. oz. | Type | Approx. Linear Coverage @ Bead Dia. | Mixing Req. | Begins to Harden, min. | Reaches Full Strength, hr. | Shear | Peel | Mix Ratio | Consistency | Temp. Range, ° F | For Use Outdoors | For Joining | Color | Each | Each | ||||
Epoxy | |||||||||||||||||||
| 13.5 | Cartridge | 50 ft. @ 1/4" | Yes | 45 | 24 | Not Rated | Not Rated | 1:1 | Paste | 65 to 85 | No | Masonry, Plastic, Rubber | Beige/Gray | 62695T87 | 000000 | 7451A52 | 0000000 | ||
Fuel-Resistant Surface Fillers
 |
Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
Container | Temp. Range, ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, pt. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Epoxy Surface Fillers | ||||||||||||||||
| 1.5 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N12 | 000000 | ||
| 3 | Can | 5 | 24 | Thick Liquid | Yes | 2:1 | No | 70 | 90 | Amber | Drill, Sand, Tap | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass | 2450N11 | 000000 | ||
